junidApsConfigMode
APS-MIB-JUNI ·
.1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.3
Object
column
r/w
Enumeration
The architecture of the APS group.
onePlusOne
The 1+1 architecture permanently bridges the working
line to the protection line.
oneToN
The 1:n architecture allows one protection channel to
protect up to n working channels. When a fault is detected
on one of the n working channels that channel is bridged
over the protection channel.
onePlusOneCompatible
This refers to 1 + 1 bidirectional switching compatible with
1:n bidirectional switching as specified in ITU-T
Recommendation G.783 (04/97) section A.3.4.1. Since this
mode necessitates bidirectional switching, junidApsConfigDirection
must be set to bidirectional whenever onePlusOneCompatible is set.
onePlusOneOptimized
This refers to 1 + 1 bidirectional switching optimized
for a network using predominantly 1 + 1 bidirectional
switching as specified in ITU-T Recommendation G.783 (04/97)
section B.1. Since this mode necessitates bidirectional
switching, junidApsConfigDirection must be set to bidirectional
whenever onePlusOneOptimized is set.
This object may not be modified if the associated
junidApsConfigRowStatus object is equal to active(1).
Context
- MIB
- APS-MIB-JUNI
- OID
.1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- junidApsConfigEntry
- Table
- junidApsConfigTable
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | onePlusOne |
2 | oneToN |
3 | onePlusOneCompatible |
4 | onePlusOneOptimized |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| junidApsConfigName A textual name for the APS group. | column | OctetString | .1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.1 |
| junidApsConfigCreationTime The value of sysUpTime at the time the row was
created | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.10 |
| junidApsConfigRowStatus The status of this APS group entry.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Also,
all associated junid… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.2 |
| junidApsConfigRevert The revertive mode of the APS group.
nonrevertive
Traffic remains on the protection line until another switch
request is received.
rev… | column | Enumeration | .1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.4 |
| junidApsConfigDirection The directional mode of the APS group.
unidirectional
The unidirectional mode provides protection in one direction.
bidirectional
… | column | Enumeration | .1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.5 |
| junidApsConfigExtraTraffic This object enables or disables the transfer of extra traffic
on the protection channel in a 1:n architecture. This object
must be set to disabled if the architecture is 1+1. It m… | column | Enumeration | .1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.6 |
| junidApsConfigSdBerThreshold The Signal Degrade Bit Error Rate.
The negated value of this number is used as the exponent of
10 for computing the threshold value for the Bit Error Rate
(BER). Fo… | column | Integer32 | .1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.7 |
| junidApsConfigSfBerThreshold The Signal Failure Bit Error Rate.
The negated value of this number is used as the exponent of
10 for computing the threshold value for the Bit Error Rate
(BER). Fo… | column | Integer32 | .1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.8 |
| junidApsConfigWaitToRestore The Wait To Restore period in seconds.
After clearing of a condition that necessitated an
automatic switch, the wait to restore period must elapse
before reverting.… | column | seconds Integer32 | .1.3.6.1.4.1.4874.3.2.2.1.1.1.2.1.9 |