pduEnableFeatures

APNL-MODULAR-PDU-MIB · .1.3.6.1.4.1.29640.4.3.30
MIB view Table view

Object

scalar r/w Bits 
Array of bits each one an specific feature within the pdu:
globalWebEnabled       (0) This bit enables the PDU webpages.
globalUsbEnabled        (1) This bit enables the USB menu.
globalSwitchEnabled    (2) This bit enables switching in general.
displaySwitchEnabled  (3) This bit enables switching through the presentation module. 
webSwitchEnabled        (4) This bit enables switching throuhg the web inteface.

Context

MIB
APNL-MODULAR-PDU-MIB
OID
.1.3.6.1.4.1.29640.4.3.30
Type
scalar
Access
readwrite
Status
current
Parent
pdu
Siblings
33

Syntax

Bits

Values & Constraints

Enumerated Values
0globalWebEnabled
1globalUsbEnabled
2globalSwitchEnabled
3displaySwitchEnabled
4webSwitchEnabled

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
pduType
Type of the Pdu. PduModular (0) Modulaire OEC2 PDU communication through SNMPV3, MOD-BUS or AP-BUS in emulation mode. PduGateway1 (1) Gateway to connect OEC1 products with ext…
scalarEnumeration.1.3.6.1.4.1.29640.4.3.1
pduKvarL1
The total Reactive Power of the pdu for phase 1. It is the power that magnetic equipment (transformer, motor and relay) needs to produce the magnetizing flux.
scalarKiloWattHours SNMPv2-SMIUnsigned32.1.3.6.1.4.1.29640.4.3.10
pduKvarL2
The total Reactive Power of the pdu for phase 2. It is the power that magnetic equipment (transformer, motor and relay) needs to produce the magnetizing flux.
scalarKiloWattHours SNMPv2-SMIUnsigned32.1.3.6.1.4.1.29640.4.3.11
pduKvarL3
The total Reactive Power of the pdu for phase 3. It is the power that magnetic equipment (transformer, motor and relay) needs to produce the magnetizing flux.
scalarKiloWattHours SNMPv2-SMIUnsigned32.1.3.6.1.4.1.29640.4.3.12
pdulAcurrent
The total measured ac current for the pdu (in 1/10th Amperes) .
scalarDeciAmpers SNMPv2-SMIUnsigned32.1.3.6.1.4.1.29640.4.3.13
pduAcurrentL1
The total measured ac current for phase 1 (in 1/10th Amperes).
scalarDeciAmpers SNMPv2-SMIUnsigned32.1.3.6.1.4.1.29640.4.3.14
pduAcurrentL2
The total measured ac current for phase 2 (in 1/10th Amperes).
scalarDeciAmpers SNMPv2-SMIUnsigned32.1.3.6.1.4.1.29640.4.3.15
pduAcurrentL3
The total measured ac current for phase 3 (in 1/10th Amperes).
scalarDeciAmpers SNMPv2-SMIUnsigned32.1.3.6.1.4.1.29640.4.3.16
pduCurIpAddress
The current PDU IPv4 Address by which TCP/IP access is available.
scalarIPv4 Addr SNMPv2-SMIIpAddress.1.3.6.1.4.1.29640.4.3.17
pduCurSubNetMask
The current PDU IPv4 Subnet Mask used by the Ipstack (e.g: 255.255.255.0).
scalarIPv4 Addr SNMPv2-SMIIpAddress.1.3.6.1.4.1.29640.4.3.18
pduCurDefGwAddress
The current PDU IPv4 default gateway address used by the Ipstack (e.g: 192.168.1.1).
scalarIPv4 Addr SNMPv2-SMIIpAddress.1.3.6.1.4.1.29640.4.3.19
pduProductIdentifier
Unique serial number to identify a pdu, the number is between 1 and 65535.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.29640.4.3.2
pduNumberOfNodes
Number of items in the node table.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.29640.4.3.20
pduNumberOfSensors
Number of items in the sensor table.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.29640.4.3.21
pduSoftwareVersion
PDU software version number.
scalarOctetString.1.3.6.1.4.1.29640.4.3.22
pduFirmwareVersion
PDU firmware version number.
scalarOctetString.1.3.6.1.4.1.29640.4.3.23
pduBusProtocol
Selected protocol used on the external bus of the pdu. AP-BUS (0) Protocol used by OEC1 products or by OEC2 products in emulation mode. MOD-BUS (1) Protocol used by OEC2 produ…
scalarEnumeration.1.3.6.1.4.1.29640.4.3.24
pduAdminCommand
PDU admin management Commands: noOp (0) No operation. rebootPdu (1) Reboot the PDU (to execute new settings). redisc…
scalarEnumeration.1.3.6.1.4.1.29640.4.3.25
pduStartupIpAddress
Not supported.
scalarIPv4 Addr SNMPv2-SMIIpAddress.1.3.6.1.4.1.29640.4.3.26
pduStartupSubNetMask
Not supported.
scalarIPv4 Addr SNMPv2-SMIIpAddress.1.3.6.1.4.1.29640.4.3.27
pduStartupDefGwAddress
Not supported.
scalarIPv4 Addr SNMPv2-SMIIpAddress.1.3.6.1.4.1.29640.4.3.28
pduRealTimeClock
PDU Real-Time Clock. Maybe set by the manager.
scalarSNMPv2-TCDateAndTime.1.3.6.1.4.1.29640.4.3.29
pduSerialNumber
PDU onboard Serial Number.
scalarOctetString.1.3.6.1.4.1.29640.4.3.3
pduBusAddress
Address used to access this PDU via the external bus. When MOD-BUS protocol is used the address is valid between 1-247. When AP-BUS protocol is used the address is valid between 1…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.29640.4.3.31
pduName
Name of the PDU.
scalarOctetString.1.3.6.1.4.1.29640.4.3.32
nodeTable
A table of the modules on the PDU. Each entry represents an module unit.
table-.1.3.6.1.4.1.29640.4.3.33
sensorTable
A table of the Sensors on the PDU. Each entry represents an an Sensor unit.
table-.1.3.6.1.4.1.29640.4.3.34
pduStatus
Status of the Pdu. pduBusy (0) Indicates that an admin command is in progress. pduReady (1) The execution of an admin command was successfull. pduAlarm (2) This …
scalarEnumeration.1.3.6.1.4.1.29640.4.3.4
pduPower
The total measured pdu power in Kilo Watt's*Hour.
scalarkiloWattHours SNMPv2-SMIUnsigned32.1.3.6.1.4.1.29640.4.3.5
pduPowerL1
The total measured pdu power in Kilo Watt's*Hour for phase 1.
scalarkiloWattHours SNMPv2-SMIUnsigned32.1.3.6.1.4.1.29640.4.3.6
pduPowerL2
The total measured pdu power in Kilo Watt's*Hour for phase 2.
scalarkiloWattHours SNMPv2-SMIUnsigned32.1.3.6.1.4.1.29640.4.3.7
pduPowerL3
The total measured pdu power in Kilo Watt's*Hour for phase 3.
scalarkiloWattHours SNMPv2-SMIUnsigned32.1.3.6.1.4.1.29640.4.3.8
pduKvar
The total Reactive Power of the pdu. It is the power that magnetic equipment (transformer, motor and relay) needs to produce the magnetizing flux.
scalarKiloWattHours SNMPv2-SMIUnsigned32.1.3.6.1.4.1.29640.4.3.9