nodeName
APNL-MODULAR-PDU-MIB ·
.1.3.6.1.4.1.29640.4.3.33.1.20
Object
column
r/w
OctetString
The node name. My be set by manager.
Context
- MIB
- APNL-MODULAR-PDU-MIB
- OID
.1.3.6.1.4.1.29640.4.3.33.1.20- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- nodeEntry
- Table
- nodeTable
- Siblings
- 20
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-14
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nodeIndex The node table Index. | column | Unsigned32 | .1.3.6.1.4.1.29640.4.3.33.1.1 |
| nodeKvar The Reactive Power. It is the power that magnetic equipment
(transformer, motor and relay) needs to produce the magnetizing flux. | column | KiloWattHours SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29640.4.3.33.1.10 |
| nodeFrequency The frequency of alternating current in Hertz. e.g 50 in Europe or 60 in USA. | column | Hertz SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29640.4.3.33.1.11 |
| nodePowerFactor The effective power facton (Cosinus Phi) in percents of the node. | column | Percent SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29640.4.3.33.1.12 |
| nodeSwitchOperStatus The actual operational Status of the node.
Unknown (0) not known status.
Off (1) switch is off.
On (2) switch is on. | column | Enumeration | .1.3.6.1.4.1.29640.4.3.33.1.13 |
| nodeSwitchAdminStatus The desired admin Status of the switch.
Unknown (0) not known.
Off (1) switch is off.
On (2) switch is on. | column | Enumeration | .1.3.6.1.4.1.29640.4.3.33.1.14 |
| nodeCurrHiThresh The current high threshold (in 1/10th Amperes). | column | DeciAmpers SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29640.4.3.33.1.15 |
| nodeCurrLoThresh The current low threshold (in 1/10th Amperes). | column | DeciAmpers SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29640.4.3.33.1.16 |
| nodeVoltHiThresh The voltage high threshold. | column | Volts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29640.4.3.33.1.17 |
| nodeVoltLoThresh The voltage low threshold. | column | Volts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29640.4.3.33.1.18 |
| nodeAlarmSelector Array of bits each one controls one alarm.
TrapCurrHi (0) Enable/disable the high current alarm.
TrapCurrLo (1) Enable/disable the low current alarm.
TrapVoltHi (2) Enable/disab… | column | Bits | .1.3.6.1.4.1.29640.4.3.33.1.19 |
| nodeType Type of the node.
TypeUnknown (0) Unknown node.
TypePresModChar (1) PM LCD Character Module.
TypePresModMono (2) PM Mono Graphics Module.
TypePre… | column | Enumeration | .1.3.6.1.4.1.29640.4.3.33.1.2 |
| nodePhase The measured phase of the node.
Maybe assigned when not configured in production.
PhaseUnknown (0).
PhaseL1 (1).
PhaseL2 (2).
PhaseL3 (3). | column | Enumeration | .1.3.6.1.4.1.29640.4.3.33.1.21 |
| nodeOutlet The number associated with the physical outlet of the node.
The special value of 0 indicates that this entry is not associated with a physical port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29640.4.3.33.1.3 |
| nodeAlarmStatus Array of bits each one indicates an alarm activated in the alarm selector value.
TrapCurrHi (0) The current is to high against the high current threshold.
TrapCurrLo (1) The curr… | column | Bits | .1.3.6.1.4.1.29640.4.3.33.1.4 |
| nodePower The measured node power in Kilo Watt's*Hour. | column | kiloWattHours SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29640.4.3.33.1.5 |
| nodeAcurrent The measured ac current at the node (in 1/10th Amperes). | column | DeciAmpers SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29640.4.3.33.1.6 |
| nodePeakCurrent The measured max current since last reset of the node (in 1/10th Amperes). | column | DeciAmpers SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29640.4.3.33.1.7 |
| nodeVoltage The measured voltage on the node. | column | Volts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29640.4.3.33.1.8 |
| nodeMinVoltage The measured minimum voltage at the node since last reset. | column | Volts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29640.4.3.33.1.9 |