brzaccVLSubBandLowerFrequency
ALVARION-DOT11-WLAN-MIB ·
.1.3.6.1.4.1.12394.1.1.6.12.1
Object
Applicable to SU only. Not applicable to units with SW version 2.0 or higher. The lowest frequency in the subset to be used for scanning. For 5.8GHz products the range is 5740 to 5830 MHz using 10MHz resolution. For 4.9GHz products the range is 4920 to 5080 MHz using 10MHz resolution. For HW Revision C and above this leaf is not relevant - shall return 0.
Context
- MIB
- ALVARION-DOT11-WLAN-MIB
- OID
.1.3.6.1.4.1.12394.1.1.6.12.1- Type
- scalar
- Access
- readwrite
- Status
- obsolete
- Parent
- brzaccVLFrequencyDefinition
- Siblings
- 14
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| brzaccVLSubBandSelect | node | - | .1.3.6.1.4.1.12394.1.1.6.12.10 |
| brzaccVLDFSParameters | node | - | .1.3.6.1.4.1.12394.1.1.6.12.11 |
| brzaccVLCountryCodeLearningBySU Applicable to AU only.
Starting with 4.0 it is not applicable for BA4900 and BreezeNET B.
Defines whether the SUs learn the country code of the AU. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.12.12 |
| brzaccVLCurrentAUOperatingFrequencyNew Applicable to AU/BU. The operating frequency in MHz.
(Replaces brzaccVLCurrentAUOperatingFrequency to support
a resolution of 0.5 MHz for units with HW revision C and higher).
… | scalar | DisplayString | .1.3.6.1.4.1.12394.1.1.6.12.13 |
| brzaccVLAUDefinedFrequencyNew Applicable to AU/BU.
For 5.8GHz products with SW version below 2.0 this is the
frequency in MHz of the AU/BU after the next reset.
For units with SW version 2.0 and up this is … | scalar | DisplayString | .1.3.6.1.4.1.12394.1.1.6.12.14 |
| brzaccVLAutoSubBandSelect | node | - | .1.3.6.1.4.1.12394.1.1.6.12.15 |
| brzaccVLSubBandUpperFrequency obsolete Applicable to SU only.
Not applicable to units with SW version 2.0 or higher.
The highest frequency in the subset to be used for scanning.
For 5.8GHz products the range is 5740 … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.12.2 |
| brzaccVLScanningStep Applicable to all units - For flexible Sub-Bands only.
For units with version 2.0 and above this is a read-only parameter.
The scanning step to be used for generating the freque… | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.12.3 |
| brzaccVLFrequencySubsetTable Applicable to SU/RB and to AU/BU.
Not applicable to SU/RB with SW version 4.0 and higher.
The Frequency Subset Table that includes all frequencies from
the selected Sub-ban… | table | - | .1.3.6.1.4.1.12394.1.1.6.12.4 |
| brzaccVLSetSelectedFreqSubset Applicable to SU/RB and to AU/BU.
Not applicable to SU/RB with SW version 4.0 and higher.
Apply the selected subset.
After the next reset the new subset will be used. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.12.5 |
| brzaccVLCurrentFrequencySubsetTable Applicable to SU/RB and to AU/BU.
Not applicable to SU/RB with SW version 4.0 and higher.
The Current Frequency Subset table. In SU/RB it includes all
frequencies that are … | table | - | .1.3.6.1.4.1.12394.1.1.6.12.6 |
| brzaccVLCurrentAUOperatingFrequency Applicable to AU/BU with HW revision B and lower
(for units with HW revision C and higher replaced by
brzaccVLCurrentUOperatingFrequencyNew to support a resolution
of 0.5 MHz).… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.12.7 |
| brzaccVLAUDefinedFrequency Applicable to AU/BU with HW revision B and lower
(for units with HW revision C and higher replaced by
brzaccVLAUDefinedFrequencyNew to support a resolution of 0.5 MHz).
For 5.8… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.12.8 |
| brzaccVLCurrentSUOperatingFrequency Applicable to SU/RB only.
The frequency used currently by the unit.
For 5.8GHz products with SW version below 2.0 the range is
5740 to 5830 MHz using 10MHz resolution.
For units … | scalar | DisplayString | .1.3.6.1.4.1.12394.1.1.6.12.9 |