brzaccVLFrequencyDefinition
ALVARION-DOT11-WLAN-MIB ·
.1.3.6.1.4.1.12394.1.1.6.12
Object
node
No description available.
Context
- MIB
- ALVARION-DOT11-WLAN-MIB
- OID
.1.3.6.1.4.1.12394.1.1.6.12- Type
- node
- Parent
- brzaccVLAirInterface
- Siblings
- 28
- Children
- 15
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| brzaccVLESSIDParameters | node | - | .1.3.6.1.4.1.12394.1.1.6.1 |
| brzaccVLMaxNumOfAssociations Applicable to AU only.
Not applicable to BreezeNET-B products.
Sets the upper limit for the number of SUs
that can be associated with the AU.
Range: For regular AUs (AU-BS, AU-S… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.10 |
| brzaccVLBestAu | node | - | .1.3.6.1.4.1.12394.1.1.6.11 |
| brzaccVLATPC | node | - | .1.3.6.1.4.1.12394.1.1.6.13 |
| brzaccVLCellDistanceParameters | node | - | .1.3.6.1.4.1.12394.1.1.6.15 |
| brzaccVLScanningMode Applicable to SU/RB only.
The scanning mode. In cells where the DFS Option is enabled
Scanning Mode is forced to Passive. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.16 |
| brzaccVLAntennaGain Applicable to all units. Read-write in units where
brzaccVLAntennaGainChange is supported.
Read-only in units where brzaccVLAntennaGainChange is not supported.
The net gain (i… | scalar | DisplayString | .1.3.6.1.4.1.12394.1.1.6.17 |
| brzaccVLSpectrumAnalysisParameters | node | - | .1.3.6.1.4.1.12394.1.1.6.18 |
| brzaccVLMaxNumOfAssociationsLimit Applicable to AU only.
Not applicable to BreezeNET-B products.
Shows the limit for the number of SUs that can be associated
with the AU.
For AU-BS, AU-SA, AU if Data Encryptio… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.19 |
| brzaccVLMaximumCellRadius Applicable to all units.
For AU/BU: read-write. In units with SW version 2.0 and up -
applicable only when the Cell Distance Mode is set to Manual.
The highest distance from th… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.2 |
| brzaccVLDisassociate | node | - | .1.3.6.1.4.1.12394.1.1.6.20 |
| brzaccVLTxControl Applicable to AU/BU only.
Tx Control of the AU/BU.
Starting with version 4.0 it is run-time.
For SW version below 4.0 the unit reset itself.
If set to ethernetStatusControl, the… | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.21 |
| brzaccVLLostBeaconsWatchdogThreshold Applicable to AU/BU only.
The number of unsuccessful consecutive transmissions beacons
before Internal refresh is performed.
0 means that the lost beacons watchdog is not
… | scalar | Integer32 | .1.3.6.1.4.1.12394.1.1.6.22 |
| brzaccVLTransmitPower Applicable to all units with SW version 4.0 and higher.
The uniform transmit power for all modulation levels. For a specific
modulation level the effective transmit power (brzaccV… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.23 |
| brzaccVLMaximumTxPower Applicable to only SU/RB with SW version 4.0 and higher.
The Maximum Transmit Power for all modulation levels.
The Maximum Transmit Power for a specific modulation level is the
m… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.24 |
| brzaccVLCountryCodeParameters | node | - | .1.3.6.1.4.1.12394.1.1.6.25 |
| brzaccVLNoiseImmunityParameters | node | - | .1.3.6.1.4.1.12394.1.1.6.26 |
| brzaccVLNewTransmitPowerTable Applicable to all units with SW version 5.1 and higher
A table of transmit power parameters. | table | - | .1.3.6.1.4.1.12394.1.1.6.27 |
| brzaccVLNewMaximumTransmitPowerTable Applicable to SU/RB only.
A table of maximum transmit power parameters. | table | - | .1.3.6.1.4.1.12394.1.1.6.28 |
| brzaccVLNoiseFloorCalculationParameters | node | - | .1.3.6.1.4.1.12394.1.1.6.29 |
| brzaccVLAIFS Applicable to AU and SU. Not applicable to BreezeNET-B products.
Not applicable if Wireless Link Prioritization is enabled.
Arbitration Inter-Frame Spacing (AIFS) value, in slots.… | scalar | Integer32 | .1.3.6.1.4.1.12394.1.1.6.3 |
| brzaccVLNoiseFloorCalibrationParameters | node | - | .1.3.6.1.4.1.12394.1.1.6.30 |
| brzaccVLInterferenceMitigationParameters | node | - | .1.3.6.1.4.1.12394.1.1.6.31 |
| brzaccVLBeaconPeriod Applicable only to AU VL.
Range: 16-160 miliseconds. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.32 |
| brzaccVLMaxBeaconsLost Applicable only to AU VL.
Range: 3-64. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.33 |
| brzaccVLWirelessTrapThreshold Applicable to AU/BU only.
A wireless link quality threshold, expressed in % of retransmissions,
for sending the brzaccVLAUWirelessQualityTRAP.
This trap indicate whether the qu… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.4 |
| brzaccVLTransmitPowerTable Applicable to all units.
A table of transmit power parameters. | table | - | .1.3.6.1.4.1.12394.1.1.6.5 |
| brzaccVLMaximumTransmitPowerTable Applicable to SU/RB only.
A table of maximum transmit power parameters. | table | - | .1.3.6.1.4.1.12394.1.1.6.6 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| brzaccVLSubBandLowerFrequency obsolete Applicable to SU only.
Not applicable to units with SW version 2.0 or higher.
The lowest frequency in the subset to be used for scanning.
For 5.8GHz products the range is 5740 t… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.12.1 |
| brzaccVLSubBandSelect | node | - | .1.3.6.1.4.1.12394.1.1.6.12.10 |
| brzaccVLDFSParameters | node | - | .1.3.6.1.4.1.12394.1.1.6.12.11 |
| brzaccVLCountryCodeLearningBySU Applicable to AU only.
Starting with 4.0 it is not applicable for BA4900 and BreezeNET B.
Defines whether the SUs learn the country code of the AU. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.12.12 |
| brzaccVLCurrentAUOperatingFrequencyNew Applicable to AU/BU. The operating frequency in MHz.
(Replaces brzaccVLCurrentAUOperatingFrequency to support
a resolution of 0.5 MHz for units with HW revision C and higher).
… | scalar | DisplayString | .1.3.6.1.4.1.12394.1.1.6.12.13 |
| brzaccVLAUDefinedFrequencyNew Applicable to AU/BU.
For 5.8GHz products with SW version below 2.0 this is the
frequency in MHz of the AU/BU after the next reset.
For units with SW version 2.0 and up this is … | scalar | DisplayString | .1.3.6.1.4.1.12394.1.1.6.12.14 |
| brzaccVLAutoSubBandSelect | node | - | .1.3.6.1.4.1.12394.1.1.6.12.15 |
| brzaccVLSubBandUpperFrequency obsolete Applicable to SU only.
Not applicable to units with SW version 2.0 or higher.
The highest frequency in the subset to be used for scanning.
For 5.8GHz products the range is 5740 … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.12.2 |
| brzaccVLScanningStep Applicable to all units - For flexible Sub-Bands only.
For units with version 2.0 and above this is a read-only parameter.
The scanning step to be used for generating the freque… | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.12.3 |
| brzaccVLFrequencySubsetTable Applicable to SU/RB and to AU/BU.
Not applicable to SU/RB with SW version 4.0 and higher.
The Frequency Subset Table that includes all frequencies from
the selected Sub-ban… | table | - | .1.3.6.1.4.1.12394.1.1.6.12.4 |
| brzaccVLSetSelectedFreqSubset Applicable to SU/RB and to AU/BU.
Not applicable to SU/RB with SW version 4.0 and higher.
Apply the selected subset.
After the next reset the new subset will be used. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.12.5 |
| brzaccVLCurrentFrequencySubsetTable Applicable to SU/RB and to AU/BU.
Not applicable to SU/RB with SW version 4.0 and higher.
The Current Frequency Subset table. In SU/RB it includes all
frequencies that are … | table | - | .1.3.6.1.4.1.12394.1.1.6.12.6 |
| brzaccVLCurrentAUOperatingFrequency Applicable to AU/BU with HW revision B and lower
(for units with HW revision C and higher replaced by
brzaccVLCurrentUOperatingFrequencyNew to support a resolution
of 0.5 MHz).… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.12.7 |
| brzaccVLAUDefinedFrequency Applicable to AU/BU with HW revision B and lower
(for units with HW revision C and higher replaced by
brzaccVLAUDefinedFrequencyNew to support a resolution of 0.5 MHz).
For 5.8… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.12.8 |
| brzaccVLCurrentSUOperatingFrequency Applicable to SU/RB only.
The frequency used currently by the unit.
For 5.8GHz products with SW version below 2.0 the range is
5740 to 5830 MHz using 10MHz resolution.
For units … | scalar | DisplayString | .1.3.6.1.4.1.12394.1.1.6.12.9 |