brzaccVLDFSSuWaitingOption
ALVARION-DOT11-WLAN-MIB ·
.1.3.6.1.4.1.12394.1.1.6.12.11.5
Object
scalar
r/w
Enumeration
Applicable to AU/BU only. Defines whether the associated SUs should wait for this AU/BU after it stopped transmitting due to radar detection, before they starts scanning for other AUs/BUs.
Context
- MIB
- ALVARION-DOT11-WLAN-MIB
- OID
.1.3.6.1.4.1.12394.1.1.6.12.11.5- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- brzaccVLDFSParameters
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | disable |
2 | enable |
255 | na |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| brzaccVLDFSOption Applicable to AU/BU.
Applicable to SU/RB with SW version 5.5.20 and higher.
Enabling/disabling the DFS Algorithm.
Not applicable if DFS Option is not supported by the current Su… | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.12.11.1 |
| brzaccVLDFSDetectionAlgorithm Applicable to AU/BU.
Applicable to SU/RB with SW version 5.5.20 and higher.
Defines the DFS Detection Algorithm. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.12.11.10 |
| brzaccVLDFSRemoteRadarEventReports Applicable to AU only with SW version 5.5.20 and higher.
Defines the number of SU radar reports for the AU to leave channel .
Range: 0 - 512. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.12.11.11 |
| brzaccVLDFSRemoteRadarEventMonitoringPeriod Applicable to AU only with SW version 5.5.20 and higher.
Defines the interval in minutes of accumulated SU Radar Reports for the AU to leave channel.
Range: 1 - 30. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.12.11.12 |
| brzaccVLEnhancedETSIRadarDetection Applicable to AU/BU units with software version 5.5.27.1 and higher. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.12.11.13 |
| brzaccVLDFSChannelCheckTime Applicable to AU/BU.
Applicable to SU/RB with SW version 5.5.20 and higher. Channel Availability Check time
defines the time the unit checks the channel for presence of
radar si… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.12.11.3 |
| brzaccVLDFSChannelAvoidancePeriod Applicable to AU/BU.
Applicable to SU/RB with SW version 5.5.20 and higher.
Defines the time after detecting radar signals in a channel of
avoiding using the channel or adjacen… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.12.11.4 |
| brzaccVLDFSClearRadarDetectedChannelsAfterReset Applicable to all units with SW version 5.5.20 and higher.
Clear Radar Detected and Adjacent to Radar channels after unit reset.
Returns the unit to operate in default frequency. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.12.11.6 |
| brzaccVLDFSRadarDetectionChannelsTable Applicable to AU/BU only.
Applicable only when DFS option is on.
Displays the current channels defined in the sub-band and their radar
detection status. | table | - | .1.3.6.1.4.1.12394.1.1.6.12.11.7 |
| brzaccVLDFSMinimumPulsesToDetect Applicable to AU/BU.
Applicable to SU/RB with SW version 5.5.20 and higher.
Defines the minimum number of pulses to detect a radar.
Range: 1 - 100. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.12.11.8 |
| brzaccVLDFSChannelReuseParameters | node | - | .1.3.6.1.4.1.12394.1.1.6.12.11.9 |