brzaccVLDFSParameters
ALVARION-DOT11-WLAN-MIB ·
.1.3.6.1.4.1.12394.1.1.6.12.11
Object
node
No description available.
Context
- MIB
- ALVARION-DOT11-WLAN-MIB
- OID
.1.3.6.1.4.1.12394.1.1.6.12.11- Type
- node
- Parent
- brzaccVLFrequencyDefinition
- Siblings
- 14
- Children
- 12
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| brzaccVLSubBandLowerFrequency obsolete Applicable to SU only.
Not applicable to units with SW version 2.0 or higher.
The lowest frequency in the subset to be used for scanning.
For 5.8GHz products the range is 5740 t… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.12.1 |
| brzaccVLSubBandSelect | node | - | .1.3.6.1.4.1.12394.1.1.6.12.10 |
| brzaccVLCountryCodeLearningBySU Applicable to AU only.
Starting with 4.0 it is not applicable for BA4900 and BreezeNET B.
Defines whether the SUs learn the country code of the AU. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.12.12 |
| brzaccVLCurrentAUOperatingFrequencyNew Applicable to AU/BU. The operating frequency in MHz.
(Replaces brzaccVLCurrentAUOperatingFrequency to support
a resolution of 0.5 MHz for units with HW revision C and higher).
… | scalar | DisplayString | .1.3.6.1.4.1.12394.1.1.6.12.13 |
| brzaccVLAUDefinedFrequencyNew Applicable to AU/BU.
For 5.8GHz products with SW version below 2.0 this is the
frequency in MHz of the AU/BU after the next reset.
For units with SW version 2.0 and up this is … | scalar | DisplayString | .1.3.6.1.4.1.12394.1.1.6.12.14 |
| brzaccVLAutoSubBandSelect | node | - | .1.3.6.1.4.1.12394.1.1.6.12.15 |
| brzaccVLSubBandUpperFrequency obsolete Applicable to SU only.
Not applicable to units with SW version 2.0 or higher.
The highest frequency in the subset to be used for scanning.
For 5.8GHz products the range is 5740 … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.12.2 |
| brzaccVLScanningStep Applicable to all units - For flexible Sub-Bands only.
For units with version 2.0 and above this is a read-only parameter.
The scanning step to be used for generating the freque… | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.12.3 |
| brzaccVLFrequencySubsetTable Applicable to SU/RB and to AU/BU.
Not applicable to SU/RB with SW version 4.0 and higher.
The Frequency Subset Table that includes all frequencies from
the selected Sub-ban… | table | - | .1.3.6.1.4.1.12394.1.1.6.12.4 |
| brzaccVLSetSelectedFreqSubset Applicable to SU/RB and to AU/BU.
Not applicable to SU/RB with SW version 4.0 and higher.
Apply the selected subset.
After the next reset the new subset will be used. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.12.5 |
| brzaccVLCurrentFrequencySubsetTable Applicable to SU/RB and to AU/BU.
Not applicable to SU/RB with SW version 4.0 and higher.
The Current Frequency Subset table. In SU/RB it includes all
frequencies that are … | table | - | .1.3.6.1.4.1.12394.1.1.6.12.6 |
| brzaccVLCurrentAUOperatingFrequency Applicable to AU/BU with HW revision B and lower
(for units with HW revision C and higher replaced by
brzaccVLCurrentUOperatingFrequencyNew to support a resolution
of 0.5 MHz).… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.12.7 |
| brzaccVLAUDefinedFrequency Applicable to AU/BU with HW revision B and lower
(for units with HW revision C and higher replaced by
brzaccVLAUDefinedFrequencyNew to support a resolution of 0.5 MHz).
For 5.8… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.12.8 |
| brzaccVLCurrentSUOperatingFrequency Applicable to SU/RB only.
The frequency used currently by the unit.
For 5.8GHz products with SW version below 2.0 the range is
5740 to 5830 MHz using 10MHz resolution.
For units … | scalar | DisplayString | .1.3.6.1.4.1.12394.1.1.6.12.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| brzaccVLDFSOption Applicable to AU/BU.
Applicable to SU/RB with SW version 5.5.20 and higher.
Enabling/disabling the DFS Algorithm.
Not applicable if DFS Option is not supported by the current Su… | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.12.11.1 |
| brzaccVLDFSDetectionAlgorithm Applicable to AU/BU.
Applicable to SU/RB with SW version 5.5.20 and higher.
Defines the DFS Detection Algorithm. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.12.11.10 |
| brzaccVLDFSRemoteRadarEventReports Applicable to AU only with SW version 5.5.20 and higher.
Defines the number of SU radar reports for the AU to leave channel .
Range: 0 - 512. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.12.11.11 |
| brzaccVLDFSRemoteRadarEventMonitoringPeriod Applicable to AU only with SW version 5.5.20 and higher.
Defines the interval in minutes of accumulated SU Radar Reports for the AU to leave channel.
Range: 1 - 30. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.12.11.12 |
| brzaccVLEnhancedETSIRadarDetection Applicable to AU/BU units with software version 5.5.27.1 and higher. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.12.11.13 |
| brzaccVLDFSChannelCheckTime Applicable to AU/BU.
Applicable to SU/RB with SW version 5.5.20 and higher. Channel Availability Check time
defines the time the unit checks the channel for presence of
radar si… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.12.11.3 |
| brzaccVLDFSChannelAvoidancePeriod Applicable to AU/BU.
Applicable to SU/RB with SW version 5.5.20 and higher.
Defines the time after detecting radar signals in a channel of
avoiding using the channel or adjacen… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.12.11.4 |
| brzaccVLDFSSuWaitingOption Applicable to AU/BU only.
Defines whether the associated SUs should wait for this AU/BU
after it stopped transmitting due to radar detection, before
they starts scanning for ot… | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.12.11.5 |
| brzaccVLDFSClearRadarDetectedChannelsAfterReset Applicable to all units with SW version 5.5.20 and higher.
Clear Radar Detected and Adjacent to Radar channels after unit reset.
Returns the unit to operate in default frequency. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.1.6.12.11.6 |
| brzaccVLDFSRadarDetectionChannelsTable Applicable to AU/BU only.
Applicable only when DFS option is on.
Displays the current channels defined in the sub-band and their radar
detection status. | table | - | .1.3.6.1.4.1.12394.1.1.6.12.11.7 |
| brzaccVLDFSMinimumPulsesToDetect Applicable to AU/BU.
Applicable to SU/RB with SW version 5.5.20 and higher.
Defines the minimum number of pulses to detect a radar.
Range: 1 - 100. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.1.6.12.11.8 |
| brzaccVLDFSChannelReuseParameters | node | - | .1.3.6.1.4.1.12394.1.1.6.12.11.9 |