brzaccVLDFSChannelAvoidancePeriod

ALVARION-DOT11-WLAN-MIB · .1.3.6.1.4.1.12394.1.1.6.12.11.4
MIB view Table view

Object

scalar r/w SNMPv2-SMIInteger32 
Applicable to AU/BU. 
Applicable to SU/RB with SW version 5.5.20 and higher. 
Defines the time after detecting radar signals in a channel of 
avoiding using the channel or adjacent channels in 
accordance with the bandwidth. Range: 1 to 60 (minutes).

Context

MIB
ALVARION-DOT11-WLAN-MIB
OID
.1.3.6.1.4.1.12394.1.1.6.12.11.4
Type
scalar
Access
readwrite
Status
current
Parent
brzaccVLDFSParameters
Siblings
11

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
brzaccVLDFSOption
Applicable to AU/BU. Applicable to SU/RB with SW version 5.5.20 and higher. Enabling/disabling the DFS Algorithm. Not applicable if DFS Option is not supported by the current Su…
scalarEnumeration.1.3.6.1.4.1.12394.1.1.6.12.11.1
brzaccVLDFSDetectionAlgorithm
Applicable to AU/BU. Applicable to SU/RB with SW version 5.5.20 and higher. Defines the DFS Detection Algorithm.
scalarEnumeration.1.3.6.1.4.1.12394.1.1.6.12.11.10
brzaccVLDFSRemoteRadarEventReports
Applicable to AU only with SW version 5.5.20 and higher. Defines the number of SU radar reports for the AU to leave channel . Range: 0 - 512.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.1.6.12.11.11
brzaccVLDFSRemoteRadarEventMonitoringPeriod
Applicable to AU only with SW version 5.5.20 and higher. Defines the interval in minutes of accumulated SU Radar Reports for the AU to leave channel. Range: 1 - 30.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.1.6.12.11.12
brzaccVLEnhancedETSIRadarDetection
Applicable to AU/BU units with software version 5.5.27.1 and higher.
scalarEnumeration.1.3.6.1.4.1.12394.1.1.6.12.11.13
brzaccVLDFSChannelCheckTime
Applicable to AU/BU. Applicable to SU/RB with SW version 5.5.20 and higher. Channel Availability Check time defines the time the unit checks the channel for presence of radar si…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.1.6.12.11.3
brzaccVLDFSSuWaitingOption
Applicable to AU/BU only. Defines whether the associated SUs should wait for this AU/BU after it stopped transmitting due to radar detection, before they starts scanning for ot…
scalarEnumeration.1.3.6.1.4.1.12394.1.1.6.12.11.5
brzaccVLDFSClearRadarDetectedChannelsAfterReset
Applicable to all units with SW version 5.5.20 and higher. Clear Radar Detected and Adjacent to Radar channels after unit reset. Returns the unit to operate in default frequency.
scalarEnumeration.1.3.6.1.4.1.12394.1.1.6.12.11.6
brzaccVLDFSRadarDetectionChannelsTable
Applicable to AU/BU only. Applicable only when DFS option is on. Displays the current channels defined in the sub-band and their radar detection status.
table-.1.3.6.1.4.1.12394.1.1.6.12.11.7
brzaccVLDFSMinimumPulsesToDetect
Applicable to AU/BU. Applicable to SU/RB with SW version 5.5.20 and higher. Defines the minimum number of pulses to detect a radar. Range: 1 - 100.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.1.6.12.11.8
brzaccVLDFSChannelReuseParametersnode-.1.3.6.1.4.1.12394.1.1.6.12.11.9