brzaccVLAUDefinedFrequencyNew

ALVARION-DOT11-WLAN-MIB · .1.3.6.1.4.1.12394.1.1.6.12.14
MIB view Table view

Object

scalar r/w DisplayString 
Applicable to AU/BU. 
For 5.8GHz products with SW version below 2.0 this is the 
frequency in MHz of the AU/BU after the next reset. 
For units with SW version 2.0 and up this is the 
frequency in MHz to use when the DFS Option is disabled. 
(Replaces brzaccVLAUDefinedFrequency to support a resolution 
of 0.5 MHz for units with HW revision C and higher). 
For 5.8GHz products with SW version below 2.0 the range 
is 5740 to 5830 MHz using 10MHz resolution. 
For units with SW version 2.0 and up the range is as 
defined in the selected Sub Band.

Context

MIB
ALVARION-DOT11-WLAN-MIB
OID
.1.3.6.1.4.1.12394.1.1.6.12.14
Type
scalar
Access
readwrite
Status
current
Parent
brzaccVLFrequencyDefinition
Siblings
14

Syntax

DisplayString
Source
DisplayString
Base type
OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
brzaccVLSubBandLowerFrequency obsolete
Applicable to SU only. Not applicable to units with SW version 2.0 or higher. The lowest frequency in the subset to be used for scanning. For 5.8GHz products the range is 5740 t…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.1.6.12.1
brzaccVLSubBandSelectnode-.1.3.6.1.4.1.12394.1.1.6.12.10
brzaccVLDFSParametersnode-.1.3.6.1.4.1.12394.1.1.6.12.11
brzaccVLCountryCodeLearningBySU
Applicable to AU only. Starting with 4.0 it is not applicable for BA4900 and BreezeNET B. Defines whether the SUs learn the country code of the AU.
scalarEnumeration.1.3.6.1.4.1.12394.1.1.6.12.12
brzaccVLCurrentAUOperatingFrequencyNew
Applicable to AU/BU. The operating frequency in MHz. (Replaces brzaccVLCurrentAUOperatingFrequency to support a resolution of 0.5 MHz for units with HW revision C and higher). …
scalarDisplayString.1.3.6.1.4.1.12394.1.1.6.12.13
brzaccVLAutoSubBandSelectnode-.1.3.6.1.4.1.12394.1.1.6.12.15
brzaccVLSubBandUpperFrequency obsolete
Applicable to SU only. Not applicable to units with SW version 2.0 or higher. The highest frequency in the subset to be used for scanning. For 5.8GHz products the range is 5740 …
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.1.6.12.2
brzaccVLScanningStep
Applicable to all units - For flexible Sub-Bands only. For units with version 2.0 and above this is a read-only parameter. The scanning step to be used for generating the freque…
scalarEnumeration.1.3.6.1.4.1.12394.1.1.6.12.3
brzaccVLFrequencySubsetTable
Applicable to SU/RB and to AU/BU. Not applicable to SU/RB with SW version 4.0 and higher. The Frequency Subset Table that includes all frequencies from the selected Sub-ban…
table-.1.3.6.1.4.1.12394.1.1.6.12.4
brzaccVLSetSelectedFreqSubset
Applicable to SU/RB and to AU/BU. Not applicable to SU/RB with SW version 4.0 and higher. Apply the selected subset. After the next reset the new subset will be used.
scalarEnumeration.1.3.6.1.4.1.12394.1.1.6.12.5
brzaccVLCurrentFrequencySubsetTable
Applicable to SU/RB and to AU/BU. Not applicable to SU/RB with SW version 4.0 and higher. The Current Frequency Subset table. In SU/RB it includes all frequencies that are …
table-.1.3.6.1.4.1.12394.1.1.6.12.6
brzaccVLCurrentAUOperatingFrequency
Applicable to AU/BU with HW revision B and lower (for units with HW revision C and higher replaced by brzaccVLCurrentUOperatingFrequencyNew to support a resolution of 0.5 MHz).…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.1.6.12.7
brzaccVLAUDefinedFrequency
Applicable to AU/BU with HW revision B and lower (for units with HW revision C and higher replaced by brzaccVLAUDefinedFrequencyNew to support a resolution of 0.5 MHz). For 5.8…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.1.6.12.8
brzaccVLCurrentSUOperatingFrequency
Applicable to SU/RB only. The frequency used currently by the unit. For 5.8GHz products with SW version below 2.0 the range is 5740 to 5830 MHz using 10MHz resolution. For units …
scalarDisplayString.1.3.6.1.4.1.12394.1.1.6.12.9