brzaccVLAUDefinedFrequency

ALVARION-DOT11-WLAN-MIB · .1.3.6.1.4.1.12394.1.1.6.12.8
MIB view Table view

Object

scalar r/w SNMPv2-SMIInteger32 
Applicable to AU/BU with HW revision B and lower 
(for units with HW revision C and higher replaced by 
brzaccVLAUDefinedFrequencyNew to support a resolution of 0.5 MHz). 
For 5.8GHz products with SW version below 2.0 this is the frequency 
in MHz of the AU/BU after the next reset. 
For units with SW version 2.0 and up this is the frequency in MHz 
to use when the DFS Option is disabled. 
For 5.8GHz products with SW version below 2.0 the range is 
5740 to 5830 MHz using 10MHz resolution. 
For units with SW version 2.0 and up the range is as defined 
in the selected Sub Band.

Context

MIB
ALVARION-DOT11-WLAN-MIB
OID
.1.3.6.1.4.1.12394.1.1.6.12.8
Type
scalar
Access
readwrite
Status
current
Parent
brzaccVLFrequencyDefinition
Siblings
14

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
brzaccVLSubBandLowerFrequency obsolete
Applicable to SU only. Not applicable to units with SW version 2.0 or higher. The lowest frequency in the subset to be used for scanning. For 5.8GHz products the range is 5740 t…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.1.6.12.1
brzaccVLSubBandSelectnode-.1.3.6.1.4.1.12394.1.1.6.12.10
brzaccVLDFSParametersnode-.1.3.6.1.4.1.12394.1.1.6.12.11
brzaccVLCountryCodeLearningBySU
Applicable to AU only. Starting with 4.0 it is not applicable for BA4900 and BreezeNET B. Defines whether the SUs learn the country code of the AU.
scalarEnumeration.1.3.6.1.4.1.12394.1.1.6.12.12
brzaccVLCurrentAUOperatingFrequencyNew
Applicable to AU/BU. The operating frequency in MHz. (Replaces brzaccVLCurrentAUOperatingFrequency to support a resolution of 0.5 MHz for units with HW revision C and higher). …
scalarDisplayString.1.3.6.1.4.1.12394.1.1.6.12.13
brzaccVLAUDefinedFrequencyNew
Applicable to AU/BU. For 5.8GHz products with SW version below 2.0 this is the frequency in MHz of the AU/BU after the next reset. For units with SW version 2.0 and up this is …
scalarDisplayString.1.3.6.1.4.1.12394.1.1.6.12.14
brzaccVLAutoSubBandSelectnode-.1.3.6.1.4.1.12394.1.1.6.12.15
brzaccVLSubBandUpperFrequency obsolete
Applicable to SU only. Not applicable to units with SW version 2.0 or higher. The highest frequency in the subset to be used for scanning. For 5.8GHz products the range is 5740 …
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.1.6.12.2
brzaccVLScanningStep
Applicable to all units - For flexible Sub-Bands only. For units with version 2.0 and above this is a read-only parameter. The scanning step to be used for generating the freque…
scalarEnumeration.1.3.6.1.4.1.12394.1.1.6.12.3
brzaccVLFrequencySubsetTable
Applicable to SU/RB and to AU/BU. Not applicable to SU/RB with SW version 4.0 and higher. The Frequency Subset Table that includes all frequencies from the selected Sub-ban…
table-.1.3.6.1.4.1.12394.1.1.6.12.4
brzaccVLSetSelectedFreqSubset
Applicable to SU/RB and to AU/BU. Not applicable to SU/RB with SW version 4.0 and higher. Apply the selected subset. After the next reset the new subset will be used.
scalarEnumeration.1.3.6.1.4.1.12394.1.1.6.12.5
brzaccVLCurrentFrequencySubsetTable
Applicable to SU/RB and to AU/BU. Not applicable to SU/RB with SW version 4.0 and higher. The Current Frequency Subset table. In SU/RB it includes all frequencies that are …
table-.1.3.6.1.4.1.12394.1.1.6.12.6
brzaccVLCurrentAUOperatingFrequency
Applicable to AU/BU with HW revision B and lower (for units with HW revision C and higher replaced by brzaccVLCurrentUOperatingFrequencyNew to support a resolution of 0.5 MHz).…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.1.6.12.7
brzaccVLCurrentSUOperatingFrequency
Applicable to SU/RB only. The frequency used currently by the unit. For 5.8GHz products with SW version below 2.0 the range is 5740 to 5830 MHz using 10MHz resolution. For units …
scalarDisplayString.1.3.6.1.4.1.12394.1.1.6.12.9