aluRS232LoopbackStopped
ALU-PORT-MIB ·
.1.3.6.1.4.1.6527.6.1.2.3.2.2.0.4
Object
notification
The aluRS232LoopbackStopped notification is generated when a loopback is removed on a RS-232/V.35/X.21/RS-530 port. The value of aluRS232Loopback specifies the type of loopback that was configured and has now been removed.
Context
- MIB
- ALU-PORT-MIB
- OID
.1.3.6.1.4.1.6527.6.1.2.3.2.2.0.4- Type
- notification
- Status
- current
- Parent
- aluPortNotification
- Siblings
- 23
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aluEqPortRS232Alarm Generated when a RS232 interface alarm condition is detected.
It is generated only when the type of alarm being raised is enabled
in aluRS232ReportAlarm. | notification | - | .1.3.6.1.4.1.6527.6.1.2.3.2.2.0.1 |
| aluEqPortDataAlarmClear Generated when a Data interface alarm condition is cleared.
It is generated only when the type of alarm being cleared is enabled
in aluDataReportAlarm. | notification | - | .1.3.6.1.4.1.6527.6.1.2.3.2.2.0.10 |
| aluDataLoopbackStarted The aluDataLoopbackStarted notification is generated when a
loopback is provisioned on a Data port. | notification | - | .1.3.6.1.4.1.6527.6.1.2.3.2.2.0.11 |
| aluDataLoopbackStopped The aluDataLoopbackStopped notification is generated when a
loopback is removed on a Data port. The value of
aluDataLoopback specifies the type of loopback that was
configured … | notification | - | .1.3.6.1.4.1.6527.6.1.2.3.2.2.0.12 |
| aluExtPethPsePortStatusChange Generated when there is a change in Power Classification,
Detection Status, Fault Reason, or Oper Status on a power ethernet port. | notification | - | .1.3.6.1.4.1.6527.6.1.2.3.2.2.0.13 |
| aluSerialMddbSquelchStatusChanged The aluSerialMddbSquelchStatusChanged notification is generated when the
Squelch Status of a scada bridge is changed. The value of
aluSerialMddbSquelchStatus indicates the new sq… | notification | - | .1.3.6.1.4.1.6527.6.1.2.3.2.2.0.14 |
| aluSerialMddbSquelchResetIssued The aluSerialMddbSquelchResetIssued notification is generated when user
reset the squelch of the scada bridge. The value of
aluSerialMddbSquelchStatus indicates the existing squel… | notification | - | .1.3.6.1.4.1.6527.6.1.2.3.2.2.0.15 |
| aluGnssPortStatusChange The aluGnssPortStatusChange notification is generated when
there is a change in the status of the GNSS receiver. This
notification
is a point-in-time status change event.
… | notification | - | .1.3.6.1.4.1.6527.6.1.2.3.2.2.0.16 |
| aluPcmSquelchStatusChanged The aluPcmSquelchStatusChanged notification is generated when the
Squelch Status of a scada bridge is changed. The value of
aluPcmSquelchStatus indicates the new squelch status d… | notification | - | .1.3.6.1.4.1.6527.6.1.2.3.2.2.0.17 |
| aluPcmSquelchResetIssued The aluPcmSquelchResetIssued notification is generated when user
reset the squelch of the scada bridge. The value of
aluPcmSquelchStatus indicates the existing squelch status. | notification | - | .1.3.6.1.4.1.6527.6.1.2.3.2.2.0.18 |
| aluRS232ControlLeadsSignalChange The aluRS232ControlLeadsSignalChange notification is generated when
there is a change in the status of a Serial control lead signal. This
notification is a point-in-time status ch… | notification | - | .1.3.6.1.4.1.6527.6.1.2.3.2.2.0.19 |
| aluEqPortRS232AlarmClear Generated when a RS232 interface alarm condition is cleared.
It is generated only when the type of alarm being cleared is enabled
in aluRS232ReportAlarm. | notification | - | .1.3.6.1.4.1.6527.6.1.2.3.2.2.0.2 |
| aluRS232SquelchStatusChange The aluRS232SquelchStatusChange notification is generated when
there is a change in the status of squelch on the respective channel.
This notification is a point-in-time status ch… | notification | - | .1.3.6.1.4.1.6527.6.1.2.3.2.2.0.20 |
| aluRS232SquelchResetIssued The aluRS232SquelchResetIssued notification is generated when the
user triggers a manual reset of squelch via
aluRS232SocketSquelchReset. The value of aluRS232SocketSquelchStatus
… | notification | - | .1.3.6.1.4.1.6527.6.1.2.3.2.2.0.21 |
| aluRS232ClockSyncStateChange The aluRS232ClockSyncStateChange notification is generated when the
aluRS232ClockSyncState changes for an RS232 interface. | notification | - | .1.3.6.1.4.1.6527.6.1.2.3.2.2.0.22 |
| aluExtDS0ChanGrpLoopbackStarted The aluExtDS0ChanGrpLoopbackStarted notification is generated when a
loopback is provisioned on a DS0 channel group. | notification | - | .1.3.6.1.4.1.6527.6.1.2.3.2.2.0.23 |
| aluExtDS0ChanGrpLoopbackStopped The aluExtDS0ChanGrpLoopbackStopped notification is generated when a
loopback is removed on a DS0 channel group. The value of
aluExtDS0ChanGroupLoopback specifies the type of lo… | notification | - | .1.3.6.1.4.1.6527.6.1.2.3.2.2.0.24 |
| aluRS232LoopbackStarted The aluRS232LoopbackStarted notification is generated when a
loopback is provisioned on a RS-232/V.35/X.21/RS-530 port. | notification | - | .1.3.6.1.4.1.6527.6.1.2.3.2.2.0.3 |
| aluVoiceLoopbackStarted The aluVoiceLoopbackStarted notification is generated when a
loopback is provisioned on a voice port. | notification | - | .1.3.6.1.4.1.6527.6.1.2.3.2.2.0.5 |
| aluVoiceLoopbackStopped The aluVoiceLoopbackStopped notification is generated when a
loopback is removed on a voice port. The value of
aluVoiceLoopback specifies the type of loopback that was
configure… | notification | - | .1.3.6.1.4.1.6527.6.1.2.3.2.2.0.6 |
| aluGponPortInbandAlarm Generated when an alarm condition is detected on the inband signaling
mechanism between the ONT and SAR | notification | - | .1.3.6.1.4.1.6527.6.1.2.3.2.2.0.7 |
| aluGponPortInbandAlarmClear Generated when an alarm condition is cleared on the inband signaling
mechanism between the ONT and SAR | notification | - | .1.3.6.1.4.1.6527.6.1.2.3.2.2.0.8 |
| aluEqPortDataAlarm Generated when a Data interface alarm condition is detected.
It is generated only when the type of alarm being raised is enabled
in aluDataReportAlarm. | notification | - | .1.3.6.1.4.1.6527.6.1.2.3.2.2.0.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| TIMETRA-PORT-MIBtmnxPortNotifyPortId | - | - | - |
| aluRS232Loopback aluRS232Loopback is used to put the port into a loopback mode.
The value of tmnxPortAdminStatus should be set to outOfService
in order for the loopback to be enabled.
… | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.9 |