radioBranchThrshTable
ALFOPLUS-SIAE-MIB ·
.1.3.6.1.4.1.3373.25.39.1.1.60
Object
column
SNMPv2-SMIOpaque
Table (110 bytes) used for the Fade Margin:
Flag (1 byte)
Ptx-error (41 Bytes)
BER mode (1 bytes)
Prx-Level (2 bytes)
Prx-NominalLevel (2 bytes)
Spare (63 bytes)
Flag: Data Valid: the value 1 means that
following data are valid
Ptx-error: Array of errors in [dB/8] where
Ptx-error[0] is the error relative to
'Ptx-nominal-value',
Ptx-error[1] 'Ptx-nominal-value'-1 dB
Ptx-error[40]'Ptx-nominal-value'-40 dB
BER mode: Note: At 02/10/2008 the only available
value is zero
Prx-Level: RX Power level in dBm/8'
Prx-NominalLevel: Nominal RX Power level in dBm/8'.
Context
- MIB
- ALFOPLUS-SIAE-MIB
- OID
.1.3.6.1.4.1.3373.25.39.1.1.60- Type
- column
- Access
- readonly
- Status
- current
- Parent
- radioBranchRecord
- Table
- radioBranchTable
- Siblings
- 60
Syntax
SNMPv2-SMIOpaque
- Source
- SNMPv2-SMIOpaque
- Base type
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| radioBranchId This object identifies the Radio Branch. | column | Enumeration | .1.3.6.1.4.1.3373.25.39.1.1.1 |
| radioBranchTxStatus Transmitter status control. | column | Enumeration | .1.3.6.1.4.1.3373.25.39.1.1.10 |
| radioBranchCarrierOnly Carrier only transmission control. | column | Enumeration | .1.3.6.1.4.1.3373.25.39.1.1.11 |
| radioBranchPrx Received power level (dBm). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.12 |
| radioBranchPtx Transmitted power level (dBm). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.13 |
| radioBranchLoop Enables/disables the Radio Branch loops. | column | Enumeration | .1.3.6.1.4.1.3373.25.39.1.1.14 |
| radioBranchNormalizedMse Normalized MSE (Mean Squared Error) is an indicator of the Signal
to Noise (S/N) ratio. It's in 0.1 dB steps | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.17 |
| radioBranchRFLoopModulePresence RF loop module presence (0 = Present, 1 = Not present). | column | Enumeration | .1.3.6.1.4.1.3373.25.39.1.1.18 |
| radioBranchTxFrequency Transmitted frequency chooses by operator in KHz. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.2 |
| radioBranchBaseBandMantBer Mantissa of Measured BER (n*10-x). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.20 |
| radioBranchBaseBandExpBer Exponent of Measured BER (n*10-x). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.21 |
| radioBranchBaseBandErr Number of error. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.22 |
| radioBranchTimeBer Elapsed time since the start of Ber evaluation command. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.23 |
| radioBranchStartBer Reset BER and Start BER evaluation. | column | Enumeration | .1.3.6.1.4.1.3373.25.39.1.1.24 |
| radioBranchInvalidFrequencyAlarm Invalid frequency alarm with associated severity. | column | Enumeration | .1.3.6.1.4.1.3373.25.39.1.1.27 |
| radioBranchBaseBandRxAlarm Base Band Rx alarm status with associated severity. | column | Enumeration | .1.3.6.1.4.1.3373.25.39.1.1.28 |
| radioBranchModulatorFailAlarm Modulator Fail Alarm status with associated severity. | column | Enumeration | .1.3.6.1.4.1.3373.25.39.1.1.29 |
| radioBranchDemodulatorFailAlarm Demodulator Fail Alarm status with associated severity. | column | Enumeration | .1.3.6.1.4.1.3373.25.39.1.1.30 |
| radioBranchRxPowerLowAlarm Receiver power low alarm status with associated severity. | column | Enumeration | .1.3.6.1.4.1.3373.25.39.1.1.31 |
| radioBranchTxPowerLowAlarm Transmitter power low alarm status with associated severity. | column | Enumeration | .1.3.6.1.4.1.3373.25.39.1.1.32 |
| radioBranchRtVcoFailAlarm RT VCO fail alarm status with associated severity. | column | Enumeration | .1.3.6.1.4.1.3373.25.39.1.1.37 |
| radioBranchRxAcgAlarm RT IF fail alarm status with associated severity. | column | Enumeration | .1.3.6.1.4.1.3373.25.39.1.1.38 |
| radioBranchRxQualityLowAlarm Low BER Alarm status with associated severity. | column | Enumeration | .1.3.6.1.4.1.3373.25.39.1.1.39 |
| radioBranchTxAttenuation Transmitter attenuation related to radiobranchNomPwr (dBm). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.4 |
| radioBranchRxQualityWarningAlarm The RX signal is close to cause errors on payload. | column | Enumeration | .1.3.6.1.4.1.3373.25.39.1.1.40 |
| radioBranchLabel Label of Radio Branch. | column | OctetString | .1.3.6.1.4.1.3373.25.39.1.1.45 |
| radioBranchChannelNum Number of the radio channel. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.47 |
| radioBranchTxMinFrequency Minimum of available channel frequency in KHz. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.48 |
| radioBranchTxMaxFrequency Maximum of available channel frequency in KHz. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.49 |
| radioBranchAtpcManual Enables/disables Atpc Manual operation. | column | Enumeration | .1.3.6.1.4.1.3373.25.39.1.1.5 |
| radioBranchTxChannelSpacing Transmitted signal channel spacing in KHz. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.50 |
| radioBranchCurrentDuplexFrequency Spacing between transmitted and received frequency in KHz. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.51 |
| radioBranchStepFrequency Minimum frequency step in KHz. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.52 |
| radioBranchFractionalPrx Received power level (dBm/10). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.53 |
| radioBranchFractionalPtx Transmitted power level (dBm). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.54 |
| radioBranchMinPtxNominalValue Minimum nominal Ptx in dBm. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.55 |
| radioBranchMaxPtxNominalValue Maximum nominal Ptx in dBm. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.56 |
| radioBranchExtendedMinPwr Minimum extended Ptx power for fade margin. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.57 |
| radioBranchFrequencyOpaque Table (32 Bytes) used to evaluate the channel frequency
(Ref. SP.SDHRTPR):
TxMinFrequency (1 Byte) - First Channel Frequency
TxMaxFrequency (1 Byte) - Last… | column | SNMPv2-SMIOpaque | .1.3.6.1.4.1.3373.25.39.1.1.58 |
| radioBranchRtSetupOpaque Table (64 Bytes) used to set the radio parameter (used only by the
Lab. and by the Test departement)(Ref. SP.SDHRTPR):
MinPtxNominalLevel (1 Byte) (PtxMin in dBm)
MaxPtx… | column | SNMPv2-SMIOpaque | .1.3.6.1.4.1.3373.25.39.1.1.59 |
| radioBranchAtpcPwrHigh ATPC Control - Local Rx Power High (dBm range -30 to -80) -. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.6 |
| radioBranchFreqTableSelection RadioBranchFrequencyTable key (channel spacing & modulation) selection. | column | Enumeration | .1.3.6.1.4.1.3373.25.39.1.1.61 |
| radioBranchMaxChNum Max channel number related to the band width selected.
It define the number of radioBranchFreqTabRecord | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.62 |
| radioBranchConfigMismatchAlarm Config Mismatch alarm status with associated severity and related map. | column | Enumeration | .1.3.6.1.4.1.3373.25.39.1.1.63 |
| radioBranchConfigMap Bit map to define the Config Mismatch Alarm:
Bit 0: SECURITY
Bit 1: FREQFAIL
Bit 2: FREQALERT
Bit 3: PTXFAIL
Bit 4: CAPMODFAIL
Bit 5: REMCONFIG
Bit 6: REMFAIL
Bit 7: ACMFAIL. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.64 |
| radioBranchDuplexFrequencyChoise1 Possible value of duplex frequency in KHz.
0 means value undefined. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.65 |
| radioBranchDuplexFrequencyChoise2 Possible value of duplex frequency in KHz.
0 means value undefined. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.66 |
| radioBranchDuplexFrequencyChoise3 Possible value of duplex frequency in KHz.
0 means value undefined. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.67 |
| radioBranchDuplexFrequencyChoise4 Possible value of duplex frequency in KHz.
0 means value undefined. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.68 |
| radioBranchDuplexFrequencyChoise5 Possible value of duplex frequency in KHz.
0 means value undefined. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.69 |
| radioBranchAtpcPwrLow ATPC Control - Local Rx Power Low (dBm range -30 to -80) -. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.7 |
| radioBranchDuplexFrequencyChoise6 Possible value of duplex frequency in KHz.
0 means value undefined. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.70 |
| radioBranchDuplexFrequency Value of duplex frequency in KHz. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.71 |
| radioBranchRFLoopTestResult Radio branch RT loop test result. | column | Enumeration | .1.3.6.1.4.1.3373.25.39.1.1.72 |
| radioBranchRFLoopTestPercTime Radio branch RT loop test time percentage | column | Integer32 | .1.3.6.1.4.1.3373.25.39.1.1.73 |
| radioBranchPermanentTxStatus Transmitter status control.
When active (1) it swithes off the transmitter
in a permanent way. | column | Enumeration | .1.3.6.1.4.1.3373.25.39.1.1.74 |
| radioBranchRxFrequency Received frequency chooses by operator in KHz. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.75 |
| radioBranchRxType Received frequency type (standard/flexible). | column | Enumeration | .1.3.6.1.4.1.3373.25.39.1.1.76 |
| radioBranchAtpcRange Defines the range of the ATPC regulation (expressed in dB) with respect
to the current value of maximum Tx output, that is intended as the upper
limit of the range. A null value m… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.39.1.1.8 |
| radioBranchKeyFeatures Radio key features selection. | column | Enumeration | .1.3.6.1.4.1.3373.25.39.1.1.9 |