radioBranchPermanentTxStatus

ALFOPLUS-SIAE-MIB · .1.3.6.1.4.1.3373.25.39.1.1.74
MIB view Table view

Object

column r/w Enumeration 
Transmitter status control.
When active (1) it swithes off the transmitter
in a permanent way.

Context

MIB
ALFOPLUS-SIAE-MIB
OID
.1.3.6.1.4.1.3373.25.39.1.1.74
Type
column
Access
readwrite
Status
current
Parent
radioBranchRecord
Table
radioBranchTable
Siblings
60

Syntax

Enumeration

Values & Constraints

Enumerated Values
1transmitterOff
2transmitterOn

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
radioBranchId
This object identifies the Radio Branch.
columnEnumeration.1.3.6.1.4.1.3373.25.39.1.1.1
radioBranchTxStatus
Transmitter status control.
columnEnumeration.1.3.6.1.4.1.3373.25.39.1.1.10
radioBranchCarrierOnly
Carrier only transmission control.
columnEnumeration.1.3.6.1.4.1.3373.25.39.1.1.11
radioBranchPrx
Received power level (dBm).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.12
radioBranchPtx
Transmitted power level (dBm).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.13
radioBranchLoop
Enables/disables the Radio Branch loops.
columnEnumeration.1.3.6.1.4.1.3373.25.39.1.1.14
radioBranchNormalizedMse
Normalized MSE (Mean Squared Error) is an indicator of the Signal to Noise (S/N) ratio. It's in 0.1 dB steps
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.17
radioBranchRFLoopModulePresence
RF loop module presence (0 = Present, 1 = Not present).
columnEnumeration.1.3.6.1.4.1.3373.25.39.1.1.18
radioBranchTxFrequency
Transmitted frequency chooses by operator in KHz.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.2
radioBranchBaseBandMantBer
Mantissa of Measured BER (n*10-x).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.20
radioBranchBaseBandExpBer
Exponent of Measured BER (n*10-x).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.21
radioBranchBaseBandErr
Number of error.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.22
radioBranchTimeBer
Elapsed time since the start of Ber evaluation command.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.23
radioBranchStartBer
Reset BER and Start BER evaluation.
columnEnumeration.1.3.6.1.4.1.3373.25.39.1.1.24
radioBranchInvalidFrequencyAlarm
Invalid frequency alarm with associated severity.
columnEnumeration.1.3.6.1.4.1.3373.25.39.1.1.27
radioBranchBaseBandRxAlarm
Base Band Rx alarm status with associated severity.
columnEnumeration.1.3.6.1.4.1.3373.25.39.1.1.28
radioBranchModulatorFailAlarm
Modulator Fail Alarm status with associated severity.
columnEnumeration.1.3.6.1.4.1.3373.25.39.1.1.29
radioBranchDemodulatorFailAlarm
Demodulator Fail Alarm status with associated severity.
columnEnumeration.1.3.6.1.4.1.3373.25.39.1.1.30
radioBranchRxPowerLowAlarm
Receiver power low alarm status with associated severity.
columnEnumeration.1.3.6.1.4.1.3373.25.39.1.1.31
radioBranchTxPowerLowAlarm
Transmitter power low alarm status with associated severity.
columnEnumeration.1.3.6.1.4.1.3373.25.39.1.1.32
radioBranchRtVcoFailAlarm
RT VCO fail alarm status with associated severity.
columnEnumeration.1.3.6.1.4.1.3373.25.39.1.1.37
radioBranchRxAcgAlarm
RT IF fail alarm status with associated severity.
columnEnumeration.1.3.6.1.4.1.3373.25.39.1.1.38
radioBranchRxQualityLowAlarm
Low BER Alarm status with associated severity.
columnEnumeration.1.3.6.1.4.1.3373.25.39.1.1.39
radioBranchTxAttenuation
Transmitter attenuation related to radiobranchNomPwr (dBm).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.4
radioBranchRxQualityWarningAlarm
The RX signal is close to cause errors on payload.
columnEnumeration.1.3.6.1.4.1.3373.25.39.1.1.40
radioBranchLabel
Label of Radio Branch.
columnOctetString.1.3.6.1.4.1.3373.25.39.1.1.45
radioBranchChannelNum
Number of the radio channel.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.47
radioBranchTxMinFrequency
Minimum of available channel frequency in KHz.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.48
radioBranchTxMaxFrequency
Maximum of available channel frequency in KHz.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.49
radioBranchAtpcManual
Enables/disables Atpc Manual operation.
columnEnumeration.1.3.6.1.4.1.3373.25.39.1.1.5
radioBranchTxChannelSpacing
Transmitted signal channel spacing in KHz.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.50
radioBranchCurrentDuplexFrequency
Spacing between transmitted and received frequency in KHz.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.51
radioBranchStepFrequency
Minimum frequency step in KHz.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.52
radioBranchFractionalPrx
Received power level (dBm/10).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.53
radioBranchFractionalPtx
Transmitted power level (dBm).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.54
radioBranchMinPtxNominalValue
Minimum nominal Ptx in dBm.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.55
radioBranchMaxPtxNominalValue
Maximum nominal Ptx in dBm.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.56
radioBranchExtendedMinPwr
Minimum extended Ptx power for fade margin.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.57
radioBranchFrequencyOpaque
Table (32 Bytes) used to evaluate the channel frequency (Ref. SP.SDHRTPR): TxMinFrequency (1 Byte) - First Channel Frequency TxMaxFrequency (1 Byte) - Last…
columnSNMPv2-SMIOpaque.1.3.6.1.4.1.3373.25.39.1.1.58
radioBranchRtSetupOpaque
Table (64 Bytes) used to set the radio parameter (used only by the Lab. and by the Test departement)(Ref. SP.SDHRTPR): MinPtxNominalLevel (1 Byte) (PtxMin in dBm) MaxPtx…
columnSNMPv2-SMIOpaque.1.3.6.1.4.1.3373.25.39.1.1.59
radioBranchAtpcPwrHigh
ATPC Control - Local Rx Power High (dBm range -30 to -80) -.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.6
radioBranchThrshTable
Table (110 bytes) used for the Fade Margin: Flag (1 byte) Ptx-error (41 Bytes) BER mode (1 bytes) Prx-Level …
columnSNMPv2-SMIOpaque.1.3.6.1.4.1.3373.25.39.1.1.60
radioBranchFreqTableSelection
RadioBranchFrequencyTable key (channel spacing & modulation) selection.
columnEnumeration.1.3.6.1.4.1.3373.25.39.1.1.61
radioBranchMaxChNum
Max channel number related to the band width selected. It define the number of radioBranchFreqTabRecord
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.62
radioBranchConfigMismatchAlarm
Config Mismatch alarm status with associated severity and related map.
columnEnumeration.1.3.6.1.4.1.3373.25.39.1.1.63
radioBranchConfigMap
Bit map to define the Config Mismatch Alarm: Bit 0: SECURITY Bit 1: FREQFAIL Bit 2: FREQALERT Bit 3: PTXFAIL Bit 4: CAPMODFAIL Bit 5: REMCONFIG Bit 6: REMFAIL Bit 7: ACMFAIL.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.64
radioBranchDuplexFrequencyChoise1
Possible value of duplex frequency in KHz. 0 means value undefined.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.65
radioBranchDuplexFrequencyChoise2
Possible value of duplex frequency in KHz. 0 means value undefined.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.66
radioBranchDuplexFrequencyChoise3
Possible value of duplex frequency in KHz. 0 means value undefined.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.67
radioBranchDuplexFrequencyChoise4
Possible value of duplex frequency in KHz. 0 means value undefined.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.68
radioBranchDuplexFrequencyChoise5
Possible value of duplex frequency in KHz. 0 means value undefined.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.69
radioBranchAtpcPwrLow
ATPC Control - Local Rx Power Low (dBm range -30 to -80) -.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.7
radioBranchDuplexFrequencyChoise6
Possible value of duplex frequency in KHz. 0 means value undefined.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.70
radioBranchDuplexFrequency
Value of duplex frequency in KHz.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.71
radioBranchRFLoopTestResult
Radio branch RT loop test result.
columnEnumeration.1.3.6.1.4.1.3373.25.39.1.1.72
radioBranchRFLoopTestPercTime
Radio branch RT loop test time percentage
columnInteger32.1.3.6.1.4.1.3373.25.39.1.1.73
radioBranchRxFrequency
Received frequency chooses by operator in KHz.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.75
radioBranchRxType
Received frequency type (standard/flexible).
columnEnumeration.1.3.6.1.4.1.3373.25.39.1.1.76
radioBranchAtpcRange
Defines the range of the ATPC regulation (expressed in dB) with respect to the current value of maximum Tx output, that is intended as the upper limit of the range. A null value m…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.39.1.1.8
radioBranchKeyFeatures
Radio key features selection.
columnEnumeration.1.3.6.1.4.1.3373.25.39.1.1.9