ethLanConfigManagementEnable

ALFOPLUS-SIAE-MIB · .1.3.6.1.4.1.3373.25.25.24
MIB view Table view

Object

scalar r/w SNMPv2-SMIInteger32 
The object is used to configure the management.
It is encoded as a map of bits, enabling the management
from/to a Lan port according to the following schema:
          
bit 0-3 (mask 0x000f) define Local-access-only or Out-of-Band
          
bit 0 = LAN2 Local Access Only (0=dis/1=ena)
        If enabled the three bit below are meaningless.
          
bit 1 = LAN2 Out-Of-Band (0=dis/1=ena)
        If enabled the three bit below are meaningless.
          
bit 3 = Obsolete bit (was from CPU to RADIO port)
        now is always enabled
          
bit 4-6 (mask 0x0070) define In-Band
          
bit 4 = LAN2 IN BAND (0=dis/1=ena)
bit 5 = LAN1 IN BAND (0=dis/1=ena)
bit 6 = Obsolete bit (was from CPU to RADIO port)
        now is always enabled
          
bit 7-9 (mask 0x380) define In-Band Drop Node
          
bit 7 = LAN2 DROP NODE (0=dis/1=ena)
bit 9 = Obsolete bit (was from CPU to RADIO port)
        now is always enabled
          
This leaf belongs to 'management parameters set'.

Context

MIB
ALFOPLUS-SIAE-MIB
OID
.1.3.6.1.4.1.3373.25.25.24
Type
scalar
Access
readwrite
Status
current
Parent
ethLan
Siblings
17

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ethLanPhyTable
Table with EthLanPhy records.
table-.1.3.6.1.4.1.3373.25.25.1
ethLanPhyAutoNegotiationAlarmSeverityCode
Define the severity associated to the EthLanPhyAutoNegotiatioAlarm and enable/disable the trap generation on status change event.
scalarEnumeration.1.3.6.1.4.1.3373.25.25.10
ethLanPhySyncAlarmSeverityCode
Define the severity associated to the EthLanPhySyncAlarmS and enable/disable the trap generation on status change event.
scalarEnumeration.1.3.6.1.4.1.3373.25.25.11
ethLanPhyLinkLossForwardingAlarmSeverityCode
Define the severity associated to the EthLanPhyLinkLossForwardingAlarm and enable/disable the trap generation on status change event.
scalarEnumeration.1.3.6.1.4.1.3373.25.25.12
ethLanPortTrapNotification
Enable/disable the trap generation on change of port status.
scalarEnumeration.1.3.6.1.4.1.3373.25.25.16
ethLanPhyMasterSlaveConfigurationFaultAlarmSeverityCode
Define the severity associated to the ethLanPhyMasterSlaveConfigurationFaultAlarm and enable/disable the trap generation on status change event.
scalarEnumeration.1.3.6.1.4.1.3373.25.25.19
ethLanPortTable
Table with EthLanPort records.
table-.1.3.6.1.4.1.3373.25.25.2
ethLanPhyPowerOverEthOverloadAlarmSeverityCode
Define the severity associated to the ethLanPhyPowerOverEthOverloadAlarm and enable/disable the trap generation on status change event.
scalarEnumeration.1.3.6.1.4.1.3373.25.25.20
ethLanPhyPowerOverEthZeroCurrentAlarmSeverityCode
Define the severity associated to the ethLanPhyPowerOverEthZeroCurrentAlarm and enable/disable the trap generation on status change event.
scalarEnumeration.1.3.6.1.4.1.3373.25.25.21
ethLanInBandManagementEnable
The object is used to enable/disable the in band management. It is encoded as a map of ten bits, each one enabling in band from/to a Lan port according to the following schema bit…
scalarInteger32.1.3.6.1.4.1.3373.25.25.22
ethLanInBandManagementVlanId
The VLAN Identifier. reseved for In Band Management. Null value means no Vlan. This leaf belongs to 'management parameters set'.
scalarInteger32.1.3.6.1.4.1.3373.25.25.23
ethLanOutOfBandManagementVlanId
The VLAN Identifier. reseved for Out Of Band Management.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.25.25
ethLanPortStatCounterBy1000
Enable/disable the division by 1024 of the ethLanStatsTable counters: ethLanStatsTotalBytesReceived ethLanStatsTotalFramesReceived ethLanStatsFrames64Octets ethLa…
scalarEnumeration.1.3.6.1.4.1.3373.25.25.26
ethLanSwitchTable
Table with EthLanSwitch records.
table-.1.3.6.1.4.1.3373.25.25.3
ethLanVlanTable
Table with EthLanVlan records.
table-.1.3.6.1.4.1.3373.25.25.4
ethLanStatsTable
A list of Ethernet statistics entries.
table-.1.3.6.1.4.1.3373.25.25.7
ethLanPhyLinkLossAlarmSeverityCode
Define the severity associated to the EthLanPhyLinkLossAlarm and enable/disable the trap generation on status change event.
scalarEnumeration.1.3.6.1.4.1.3373.25.25.9