ethEnhVlanPrioTosDscpQueueMap
ALFOPLUS-SIAE-MIB ·
.1.3.6.1.4.1.3373.25.32.10
Object
This object defines the connection of the queues to the DSCP field of the IP protocol. It's an array of nibble in which each position is the class and the value is the queue. The first (leftmost) octet in the string corresponds to the nibbles related to DSCP values 63 and 62; the last (rightmost) octet in the string corresponds to the nibbles related to DSCP values 1 and 0.
Context
- MIB
- ALFOPLUS-SIAE-MIB
- OID
.1.3.6.1.4.1.3373.25.32.10- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- ethEnh
- Siblings
- 31
Syntax
SNMPv2-SMIOpaque
- Source
- SNMPv2-SMIOpaque
- Base type
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ethEnhQueueTable Table with ethEnhanced Queue records. | table | - | .1.3.6.1.4.1.3373.25.32.1 |
| ethEnhVlanPrioMplsQueueMap This object defines the connection of the queue to the EXP field of
the lowest MPLS level. It's an array of nibble in which each position
is the priority and the value is the queu… | scalar | SNMPv2-SMIOpaque | .1.3.6.1.4.1.3373.25.32.11 |
| ethEnhVlanPrioMplsRewriteRemap This object defines the remapping of the PCP with the priority
defined in the MPLS field. It's an array of nibble in which each
position is the priority and the value is the nativ… | scalar | SNMPv2-SMIOpaque | .1.3.6.1.4.1.3373.25.32.12 |
| ethEnhLinkConcatenationEnable This object enables or disables the link concatenation on
the equipment. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.32.13 |
| ethEnhPacketFragmentation This object enables or disables the packet fragmentation on
the equipment. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.32.14 |
| ethEnhUseCustomEtherType This object enables or disables the management of custom
ethertype on the equipment. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.32.15 |
| ethEnhCustomEtherType This object defines the custom ethertype of the equipment.
It is meaningfull only if previous leaf is configured to
enable. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.32.16 |
| ethEnhModule This object enables/disables the module of ethernet enhanced.
If the value is disable_reset all the instances are deleted
otherwise (disable_freeze) are freezed until an enables c… | scalar | Enumeration | .1.3.6.1.4.1.3373.25.32.17 |
| ethEnhEthCompression This object enables/disables the Ethernet compression
It is a byte bit structured:
Bit 7 : Ethernet compression enable (1)
Bit 5-6: Ctag compression enable (01)
Bit 4 : QinQ c… | scalar | Enumeration | .1.3.6.1.4.1.3373.25.32.18 |
| ethEnhMplsCompression This object enables/disables the Mpls compression
It is meaningful (not equal to none) only if Ethernet
compression is enabled
It is a byte bit structured:
Bit 7 : Mpls compres… | scalar | Enumeration | .1.3.6.1.4.1.3373.25.32.19 |
| ethEnhPortQueueTable Table with ethEnhPortQueue records. | table | - | .1.3.6.1.4.1.3373.25.32.2 |
| ethEnhIpCompression This object enables/disables IP compression
It is meaningful (not equal to none) only if Ethernet
compression is enabled
It is a byte bit structured:
Bit 7 : Ipv6 compression e… | scalar | Enumeration | .1.3.6.1.4.1.3373.25.32.20 |
| ethEnhEthNbrOfStag Maximum number of S-tag (QinQ compression). | scalar | Integer32 | .1.3.6.1.4.1.3373.25.32.21 |
| ethEnhMplsNbrOfLabel Maximum number of MPLS labels (Mpls compression). | scalar | Integer32 | .1.3.6.1.4.1.3373.25.32.22 |
| ethEnhCompressionLevels This leaf indicates the actual multi-level header compression
support, provided by the hardware configuration. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.32.23 |
| ethEnhCompressionModuleStatus This object enables/disables the functions provided by the
compression module. If the value is set to <disable>, all the
compression related leaves are set to their default values… | scalar | Enumeration | .1.3.6.1.4.1.3373.25.32.24 |
| ethEnhRemoteCfg1 This object means the remote configuration of the compression and
fragmentation of branch 1 of the 2*(1+0) Dual configuration
otherwise it means the only branch active.
The bytes … | scalar | OctetString | .1.3.6.1.4.1.3373.25.32.25 |
| ethEnhRemoteCfg2 This object means the remote configuration of the compression and
fragmentation of branch 2 of the 2*(1+0) Dual configuration
otherwise it is meaningless.
The bytes are (from the … | scalar | OctetString | .1.3.6.1.4.1.3373.25.32.26 |
| ethEnhIEEE1588Enable It enables/disables IEEE 1588 PTP Pass Through management,
configuring the terminal or the single terminal branches
as Master or Slave PPS reference. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.32.27 |
| ethEnhIEEE1588PtpFilter It configures the PTP filter. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.32.28 |
| ethEnhIEEE1588PtpFilterCtag It is CTag value when PTP filter is equal to CTag or Ctag+Stag. | scalar | Integer32 | .1.3.6.1.4.1.3373.25.32.29 |
| ethEnhStagMapTable Table with ethEnhStagMap records. | table | - | .1.3.6.1.4.1.3373.25.32.3 |
| ethEnhIEEE1588PtpFilterStag It is STag value when PTP filter is equal to STag or Ctag+Stag. | scalar | Integer32 | .1.3.6.1.4.1.3373.25.32.30 |
| ethEnhEthOverMplsCompression This object enables/disables the Ethernet compression Over Mpls.
It is meaningful (not equal to none) only if Ethernet and Mpls
compressions are enabled.
It is a byte bit struct… | scalar | Enumeration | .1.3.6.1.4.1.3373.25.32.31 |
| ethEnhEthOverMplsNbrOfStag Maximum number of S-tag (Eth over Mpls QinQ compression). | scalar | Integer32 | .1.3.6.1.4.1.3373.25.32.32 |
| ethEnhPortPolicyTable Table with ethEnhPortPolicy records. | table | - | .1.3.6.1.4.1.3373.25.32.4 |
| ethEnhVlanMonTable Table with EthEnhVlanMon records. | table | - | .1.3.6.1.4.1.3373.25.32.5 |
| ethEnhRewriteTagTable Table with EthEnhRewriteTag records. | table | - | .1.3.6.1.4.1.3373.25.32.6 |
| ethEnhFilterInputTable Table with ethEnhFilterInput records. | table | - | .1.3.6.1.4.1.3373.25.32.7 |
| ethEnhVlanPrioTable Table with EthEnhVlanPrio records. | table | - | .1.3.6.1.4.1.3373.25.32.8 |
| ethEnhVlanPrio802pQueueMap This object defines the connection of the queues to the PCP field
which means the priority. It's an array of nibble in which each
position is the priority and the value is the que… | scalar | SNMPv2-SMIOpaque | .1.3.6.1.4.1.3373.25.32.9 |