equipTrapAcknowledge
ALFOPLUS-SIAE-MIB ·
.1.3.6.1.4.1.3373.25.1.13
Object
scalar
OctetString
Three bytes long: Byte [1]: 1= Alarm trap, 2= Status trap Byte [2]: Trap sequence number (most significant byte) Byte [3]: Trap sequence number (less significant byte).
Context
- MIB
- ALFOPLUS-SIAE-MIB
- OID
.1.3.6.1.4.1.3373.25.1.13- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- equipment
- Siblings
- 53
Syntax
OctetString
Values & Constraints
Object Constraints
range: 3-3
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| equipCurrentTime Seconds since 1/1/1970. | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.3373.25.1.1 |
| equipPhoneNumber Phone number assigned to the equipment. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.1.10 |
| equipTrapSequenceNumberEnable Enable/disable the insertion of the trap sequence number on
equipTrapAcknowledge. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.1.11 |
| equipAlarmSyntesysCritical OR of all Critical Alarms. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.1.14 |
| equipAlarmSyntesysCriticalSeverityCode Defines the severity associated to the equipAlarmSyntesysCritical
and enables/disables the trap generation on status change event. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.1.15 |
| equipAlarmSyntesysMajor OR of all Major Alarms. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.1.16 |
| equipAlarmSyntesysMajorSeverityCode Defines the severity associated to equipAlarmSyntesysMajor
and enables/disables the trap generation on status change event. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.1.17 |
| equipAlarmSyntesysMinor OR of all Minor Alarms. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.1.18 |
| equipAlarmSyntesysMinorSeverityCode Defines the severity associated to equipAlarmSyntesysMinor
and enables/disables the trap generation on status change event. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.1.19 |
| equipUpTime The time when the system was last re-initialized (in seconds)
since 1/1/1970. | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.3373.25.1.2 |
| equipAlarmSyntesysWarning OR of all Warning Alarms. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.1.20 |
| equipAlarmSyntesysWarningSeverityCode Defines the severity associated to equipAlarmSyntesysWarning
and enables/disables the trap generation on status change event. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.1.21 |
| equipLOMConfigEnable Enables/disables the capabilityto connect a LOM in Configuration Mode. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.1.22 |
| equipLOMConnected Signal when the LOM is connected to the NE and if the connection
is for monitor or configuration. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.1.23 |
| equipLOMConnectedTrapEnable Enables/disables the trap generation on EquipLOMConnected status change event. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.1.24 |
| equipManualOperation Manual Operation active on the equipment. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.1.25 |
| equipManualOperationSeverityCode Defines the severity associated to equipManualOperation
and enables/disables the trap generation on status change event. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.1.26 |
| equipConfigChange Set by the NE when the equipment configuration is changed by the local
or Remote LOM.
The octet string is a bit stream of flags; a set bit is a change on a
specific item. We had:
… | scalar | OctetString | .1.3.6.1.4.1.3373.25.1.27 |
| equipConfigChangeTrapEnable Enables/disables the trap generation on EquipConfigChange status
change event. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.1.28 |
| equipRequest Force Equipment Controller restart or change in interface properties. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.1.29 |
| equipType Type of SIAE PDH Radio Equipment:
radioPDH-SPUx LC Low Capacity (up to 4x2Mbit)
radioPDH-SPUx MC Medium Capacity (8x2Mbit and 16x2Mbit)
radioPDH-SPUx HC High Capacity (2x8Mbi… | scalar | Enumeration | .1.3.6.1.4.1.3373.25.1.3 |
| equipOffLineRouteTable Off Line editable route table. Do not affect equipment route table
actually in use. | table | - | .1.3.6.1.4.1.3373.25.1.30 |
| equipIpPppTable Table with one record for each IP over PPP interface that is active in the NE. | table | - | .1.3.6.1.4.1.3373.25.1.31 |
| equipSummaryAlarmTable Table with one record for each Alarms&Controls that is active in the NE. | table | - | .1.3.6.1.4.1.3373.25.1.36 |
| equipIpEthAddress Ip address of the equipment on Ethernet interface. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.3373.25.1.38 |
| equipIpEthNetMask The subnet Mask associated with the IP address of ethernet interface.
The value of the Mask is an IP address with all the network bits set to 1
and all the hosts bits set to 0. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.3373.25.1.39 |
| equipIpEthOsiAddress Ip address of the equipment on Ethernet-OSI interface. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.3373.25.1.4 |
| equipOsiamParameter It defines the set-up parameter for OSI stack. | scalar | SNMPv2-SMIOpaque | .1.3.6.1.4.1.3373.25.1.45 |
| equipAlarmAlign Force equipment to re-send all trap of active alarm. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.1.46 |
| equipGosipAddress GOSIP address of the equipment. | scalar | OctetString | .1.3.6.1.4.1.3373.25.1.5 |
| equipIpSnmpAgentAddress Ip address used by SNMP Agent for mark generated TRAP. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.3373.25.1.52 |
| equipManOpTable Table with manual operation record. | table | - | .1.3.6.1.4.1.3373.25.1.53 |
| equipManOpTimeOut This object defines the time (in seconds) after wich the manual
operations are cleared. The maximium value is equivalent to 48 hours.
A zero means no Time-out. | scalar | Integer32 | .1.3.6.1.4.1.3373.25.1.54 |
| equipManager1IpAddr First IP address of a SNMP Manager always logged to this equipment.
The address 0.0.0.0 mean that manager is not present. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.3373.25.1.55 |
| equipManager2IpAddr Second IP address of a SNMP Manager always logged to this equipment.
The address 0.0.0.0 mean that manager is not present. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.3373.25.1.56 |
| equipOperationInProgress A value different from 0 means operation in progress. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.1.57 |
| equipRemoteElementTable Table with ISO/OSI remote element that are reacheable from this NE. | table | - | .1.3.6.1.4.1.3373.25.1.6 |
| equipRmonAlarmSeverityCode Defines the severity associated to the alarms related
to the instances of the rmonAlarmGroup objects
and enables/disables the trap generation on status change event. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.1.65 |
| equipManagerWakeUpAlarm This alarm switches on when periodic connection wake-up trap starts.
The trap related to this alarm is also sent periodically only to the
manager specified by the leaf equipManage… | scalar | Enumeration | .1.3.6.1.4.1.3373.25.1.66 |
| equipManagerWakeUpAlarmSeverityCode Defines the severity associated to the equipManagerWakeUpAlarm
and enables/disables the trap generation on status change event. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.1.67 |
| equipManagerWakeUpTimeout This object defines the time (in minutes) after wich the periodic
connection wake-up trap is stopped.
The maximium value is equivalent to 24 hours.
When the timeout elapses the eq… | scalar | Integer32 | .1.3.6.1.4.1.3373.25.1.68 |
| equipManagerWakeUpIpAddr Ip Address of manager wich to send a periodic connection wake-up trap.
The periodic trap is sent only if the equipManagerWakeUpAlarmSeverityCode
differs from disable.
If Ip Addres… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.3373.25.1.69 |
| equipIpEthOsiNetMask The subnet Mask associated with the IP address of OSI ethernet interface.
The value of the Mask is an IP address with all the network bits set to 1
and all the hosts bits set to 0. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.3373.25.1.7 |
| equipManagerWakeUpGosipAddress Gosip Address of manager wich to send a periodic connection wake-up trap. | scalar | OctetString | .1.3.6.1.4.1.3373.25.1.70 |
| equipManagerWakeUpTrapVersion Trap version supported by Manager to wake-up. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.1.71 |
| equipLocation ASCII string assigned by the operator to identify the location of
specific equipment. | scalar | OctetString | .1.3.6.1.4.1.3373.25.1.72 |
| equipManager1TrapVersion Trap version supported by Manager 1 (related to equipManager1IpAddr). | scalar | Enumeration | .1.3.6.1.4.1.3373.25.1.75 |
| equipManager2TrapVersion Trap version supported by Manager 2 (related to equipManager2IpAddr). | scalar | Enumeration | .1.3.6.1.4.1.3373.25.1.76 |
| equipDailyPmTimeZone Reference GMT Time Zone to close the daily P.M. records. | scalar | Integer32 | .1.3.6.1.4.1.3373.25.1.77 |
| equipL1L2IsIsRouting It defines the IS-IS routing type: L1 within the same area, L2 among
different areas. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.1.8 |
| equipOperationMngtControl startOperation means the apply of the 'management parameters
set' on the E6165 switch.
confirmOperation means the backup of the 'management
parameters set'. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.1.82 |
| equipOperationMngtInProgress A value different from 0 means Mngt operation in progress. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.1.83 |
| equipStationID ASCII string assigned by the operator to identify the specific equipment. | scalar | OctetString | .1.3.6.1.4.1.3373.25.1.9 |