equipAlarmSyntesysMinor

ALFOPLUS-SIAE-MIB · .1.3.6.1.4.1.3373.25.1.18
MIB view Table view

Object

scalar Enumeration 
OR of all Minor Alarms.

Context

MIB
ALFOPLUS-SIAE-MIB
OID
.1.3.6.1.4.1.3373.25.1.18
Type
scalar
Access
readonly
Status
current
Parent
equipment
Siblings
53

Syntax

Enumeration

Values & Constraints

Enumerated Values
1cleared
4activeReportable-Minor

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
equipCurrentTime
Seconds since 1/1/1970.
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.3373.25.1.1
equipPhoneNumber
Phone number assigned to the equipment.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.1.10
equipTrapSequenceNumberEnable
Enable/disable the insertion of the trap sequence number on equipTrapAcknowledge.
scalarEnumeration.1.3.6.1.4.1.3373.25.1.11
equipTrapAcknowledge
Three bytes long: Byte [1]: 1= Alarm trap, 2= Status trap Byte [2]: Trap sequence number (most significant byte) Byte [3]: Trap sequence number (less significant byte).
scalarOctetString.1.3.6.1.4.1.3373.25.1.13
equipAlarmSyntesysCritical
OR of all Critical Alarms.
scalarEnumeration.1.3.6.1.4.1.3373.25.1.14
equipAlarmSyntesysCriticalSeverityCode
Defines the severity associated to the equipAlarmSyntesysCritical and enables/disables the trap generation on status change event.
scalarEnumeration.1.3.6.1.4.1.3373.25.1.15
equipAlarmSyntesysMajor
OR of all Major Alarms.
scalarEnumeration.1.3.6.1.4.1.3373.25.1.16
equipAlarmSyntesysMajorSeverityCode
Defines the severity associated to equipAlarmSyntesysMajor and enables/disables the trap generation on status change event.
scalarEnumeration.1.3.6.1.4.1.3373.25.1.17
equipAlarmSyntesysMinorSeverityCode
Defines the severity associated to equipAlarmSyntesysMinor and enables/disables the trap generation on status change event.
scalarEnumeration.1.3.6.1.4.1.3373.25.1.19
equipUpTime
The time when the system was last re-initialized (in seconds) since 1/1/1970.
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.3373.25.1.2
equipAlarmSyntesysWarning
OR of all Warning Alarms.
scalarEnumeration.1.3.6.1.4.1.3373.25.1.20
equipAlarmSyntesysWarningSeverityCode
Defines the severity associated to equipAlarmSyntesysWarning and enables/disables the trap generation on status change event.
scalarEnumeration.1.3.6.1.4.1.3373.25.1.21
equipLOMConfigEnable
Enables/disables the capabilityto connect a LOM in Configuration Mode.
scalarEnumeration.1.3.6.1.4.1.3373.25.1.22
equipLOMConnected
Signal when the LOM is connected to the NE and if the connection is for monitor or configuration.
scalarEnumeration.1.3.6.1.4.1.3373.25.1.23
equipLOMConnectedTrapEnable
Enables/disables the trap generation on EquipLOMConnected status change event.
scalarEnumeration.1.3.6.1.4.1.3373.25.1.24
equipManualOperation
Manual Operation active on the equipment.
scalarEnumeration.1.3.6.1.4.1.3373.25.1.25
equipManualOperationSeverityCode
Defines the severity associated to equipManualOperation and enables/disables the trap generation on status change event.
scalarEnumeration.1.3.6.1.4.1.3373.25.1.26
equipConfigChange
Set by the NE when the equipment configuration is changed by the local or Remote LOM. The octet string is a bit stream of flags; a set bit is a change on a specific item. We had: …
scalarOctetString.1.3.6.1.4.1.3373.25.1.27
equipConfigChangeTrapEnable
Enables/disables the trap generation on EquipConfigChange status change event.
scalarEnumeration.1.3.6.1.4.1.3373.25.1.28
equipRequest
Force Equipment Controller restart or change in interface properties.
scalarEnumeration.1.3.6.1.4.1.3373.25.1.29
equipType
Type of SIAE PDH Radio Equipment: radioPDH-SPUx LC Low Capacity (up to 4x2Mbit) radioPDH-SPUx MC Medium Capacity (8x2Mbit and 16x2Mbit) radioPDH-SPUx HC High Capacity (2x8Mbi…
scalarEnumeration.1.3.6.1.4.1.3373.25.1.3
equipOffLineRouteTable
Off Line editable route table. Do not affect equipment route table actually in use.
table-.1.3.6.1.4.1.3373.25.1.30
equipIpPppTable
Table with one record for each IP over PPP interface that is active in the NE.
table-.1.3.6.1.4.1.3373.25.1.31
equipSummaryAlarmTable
Table with one record for each Alarms&Controls that is active in the NE.
table-.1.3.6.1.4.1.3373.25.1.36
equipIpEthAddress
Ip address of the equipment on Ethernet interface.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.3373.25.1.38
equipIpEthNetMask
The subnet Mask associated with the IP address of ethernet interface. The value of the Mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.3373.25.1.39
equipIpEthOsiAddress
Ip address of the equipment on Ethernet-OSI interface.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.3373.25.1.4
equipOsiamParameter
It defines the set-up parameter for OSI stack.
scalarSNMPv2-SMIOpaque.1.3.6.1.4.1.3373.25.1.45
equipAlarmAlign
Force equipment to re-send all trap of active alarm.
scalarEnumeration.1.3.6.1.4.1.3373.25.1.46
equipGosipAddress
GOSIP address of the equipment.
scalarOctetString.1.3.6.1.4.1.3373.25.1.5
equipIpSnmpAgentAddress
Ip address used by SNMP Agent for mark generated TRAP.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.3373.25.1.52
equipManOpTable
Table with manual operation record.
table-.1.3.6.1.4.1.3373.25.1.53
equipManOpTimeOut
This object defines the time (in seconds) after wich the manual operations are cleared. The maximium value is equivalent to 48 hours. A zero means no Time-out.
scalarInteger32.1.3.6.1.4.1.3373.25.1.54
equipManager1IpAddr
First IP address of a SNMP Manager always logged to this equipment. The address 0.0.0.0 mean that manager is not present.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.3373.25.1.55
equipManager2IpAddr
Second IP address of a SNMP Manager always logged to this equipment. The address 0.0.0.0 mean that manager is not present.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.3373.25.1.56
equipOperationInProgress
A value different from 0 means operation in progress.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.1.57
equipRemoteElementTable
Table with ISO/OSI remote element that are reacheable from this NE.
table-.1.3.6.1.4.1.3373.25.1.6
equipRmonAlarmSeverityCode
Defines the severity associated to the alarms related to the instances of the rmonAlarmGroup objects and enables/disables the trap generation on status change event.
scalarEnumeration.1.3.6.1.4.1.3373.25.1.65
equipManagerWakeUpAlarm
This alarm switches on when periodic connection wake-up trap starts. The trap related to this alarm is also sent periodically only to the manager specified by the leaf equipManage…
scalarEnumeration.1.3.6.1.4.1.3373.25.1.66
equipManagerWakeUpAlarmSeverityCode
Defines the severity associated to the equipManagerWakeUpAlarm and enables/disables the trap generation on status change event.
scalarEnumeration.1.3.6.1.4.1.3373.25.1.67
equipManagerWakeUpTimeout
This object defines the time (in minutes) after wich the periodic connection wake-up trap is stopped. The maximium value is equivalent to 24 hours. When the timeout elapses the eq…
scalarInteger32.1.3.6.1.4.1.3373.25.1.68
equipManagerWakeUpIpAddr
Ip Address of manager wich to send a periodic connection wake-up trap. The periodic trap is sent only if the equipManagerWakeUpAlarmSeverityCode differs from disable. If Ip Addres…
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.3373.25.1.69
equipIpEthOsiNetMask
The subnet Mask associated with the IP address of OSI ethernet interface. The value of the Mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.3373.25.1.7
equipManagerWakeUpGosipAddress
Gosip Address of manager wich to send a periodic connection wake-up trap.
scalarOctetString.1.3.6.1.4.1.3373.25.1.70
equipManagerWakeUpTrapVersion
Trap version supported by Manager to wake-up.
scalarEnumeration.1.3.6.1.4.1.3373.25.1.71
equipLocation
ASCII string assigned by the operator to identify the location of specific equipment.
scalarOctetString.1.3.6.1.4.1.3373.25.1.72
equipManager1TrapVersion
Trap version supported by Manager 1 (related to equipManager1IpAddr).
scalarEnumeration.1.3.6.1.4.1.3373.25.1.75
equipManager2TrapVersion
Trap version supported by Manager 2 (related to equipManager2IpAddr).
scalarEnumeration.1.3.6.1.4.1.3373.25.1.76
equipDailyPmTimeZone
Reference GMT Time Zone to close the daily P.M. records.
scalarInteger32.1.3.6.1.4.1.3373.25.1.77
equipL1L2IsIsRouting
It defines the IS-IS routing type: L1 within the same area, L2 among different areas.
scalarEnumeration.1.3.6.1.4.1.3373.25.1.8
equipOperationMngtControl
startOperation means the apply of the 'management parameters set' on the E6165 switch. confirmOperation means the backup of the 'management parameters set'.
scalarEnumeration.1.3.6.1.4.1.3373.25.1.82
equipOperationMngtInProgress
A value different from 0 means Mngt operation in progress.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.1.83
equipStationID
ASCII string assigned by the operator to identify the specific equipment.
scalarOctetString.1.3.6.1.4.1.3373.25.1.9