alaQoSConfigDefaultMulticastDisposition
ALCATEL-IND1-QOS-MIB ·
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.21
Object
scalar
r/w
Enumeration
Pending disposition of IGMP requests that don't match a policy Does not take effect until an 'Apply' command is issued
Context
- MIB
- ALCATEL-IND1-QOS-MIB
- OID
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.21- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- alaQoSConfig
- Siblings
- 59
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | accept |
2 | drop |
3 | deny |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alaQoSConfigEnabled Is QoS enabled on the switch | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.1 |
| alaQoSConfigAppliedReflfexiveTimeout Current reflexive timeout (seconds). Anticipate reverse flows
for reflexive and NAT connections for this long until we see a
response. | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.10 |
| alaQoSConfigNatTimeout Pending nat timeout (seconds). Once traffic is seen in both
directions for anticipated flows, length of time to remember the
flow without seeing traffic in either direction.
Does… | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.11 |
| alaQoSConfigAppliedNatTimeout Current nat timeout (seconds). Once traffic is seen in both
directions for anticipated flows, length of time to remember the
flow without seeing traffic in either direction. | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.12 |
| alaQoSConfigClassifyl3Bridged Pending indicator for looking at L3/L4 parameters of bridged
traffic. Does not take effect until an 'Apply' command is
issued. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.13 |
| alaQoSConfigAppliedClassifyl3Bridged Current indicator for looking at L3/L4 parameters of bridged
traffic. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.14 |
| alaQoSConfigClassifyFragments Pending indicator for classifying fragmented traffic at L4
Does not take effect until an 'Apply' command is issued | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.15 |
| alaQoSConfigAppliedClassifyFragments Current indicator for classifying fragmented traffic at L4
Does not take effect until an 'Apply' command is issued | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.16 |
| alaQoSConfigDefaultBridgedDisposition Pending disposition of bridged traffic that doesn't match a
policy. Does not take effect until an 'Apply' command is issued. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.17 |
| alaQoSConfigAppliedDefaultBridgedDisposition Current disposition of bridged traffic that doesn't match a
policy. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.18 |
| alaQoSConfigDefaultRoutedDisposition Pending disposition of routed traffic that doesn't match a
policy. Does not take effect until an 'Apply' command is issued. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.19 |
| alaQoSConfigDefaultQueues Pending number of default queues to create for each port.
Can be overridden on a port by port basis. Does not take affect
until an 'Apply' command is issued. | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.2 |
| alaQoSConfigAppliedDefaultRoutedDisposition Current disposition of routed traffic that doesn't match a policy | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.20 |
| alaQoSConfigAppliedDefaultMulticastDisposition Current disposition of IGMP requests that don't match a policy | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.22 |
| alaQoSConfigStatsInterval Interval in seconds for how often statistics are updated | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.23 |
| alaQoSConfigLogLines Number of log lines to maintain in the QoS log | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.24 |
| alaQoSConfigLogLevel The level of logging desired. The higher the level, the more
verbose the logging | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.25 |
| alaQoSConfigLogConsole Whether QoS log events are logged to the console | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.26 |
| alaQoSConfigForwardLog Whether QoS forwards logging events to PolicyManager | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.27 |
| alaQoSConfigClearLog Clear the QoS log | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.28 |
| alaQoSConfigApply Set to apply all pending QoS configuration/policy changes | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.29 |
| alaQoSConfigAppliedDefaultQueues Number of default queues configured at last 'Apply' command. | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.3 |
| alaQoSConfigRevert Set to revert all pending QoS configuration/policy changes | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.30 |
| alaQoSConfigReset Set to reset global QoS configuration parameters to their
default values | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.31 |
| alaQoSConfigStatsReset Set to reset global QoS statistics counters | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.32 |
| alaQoSConfigFlush Flush all pending policy objects | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.33 |
| alaQoSConfigDebug Possible debug flags for QoS | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.34 |
| alaQoSConfigServicingMode Servicing mode for the system | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.35 |
| alaQoSConfigLowPriorityWeight Weight to use for low priority queue(0) on fixed queue blades | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.36 |
| alaQoSConfigMediumPriorityWeight Weight to use for medium priority queue(1) on fixed queue blades | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.37 |
| alaQoSConfigHighPriorityWeight Weight to use for high priority queue(2) on fixed queue blades | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.38 |
| alaQoSConfigUrgentPriorityWeight Weight to use for urgent priority queue(3) on fixed queue blades | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.39 |
| alaQoSConfigTrustPorts Flag to indicate whether to trust the 802.1p/TOS values on
incoming traffic by default. Can be overridden on a port by
port basis. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.4 |
| alaQoSConfigQ4PriorityWeight Weight to use for COS 4 priority queue(4) on fixed queue blades | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.40 |
| alaQoSConfigQ5PriorityWeight Weight to use for COS 5 priority queue(5) on fixed queue blades | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.41 |
| alaQoSConfigQ6PriorityWeight Weight to use for COS 6 priority queue(6) on fixed queue blades | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.42 |
| alaQoSConfigQ7PriorityWeight Weight to use for COS 7 priority queue(7) on fixed queue blades | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.43 |
| alaQoSConfigUserportFilter Events/protocols to filter on a Userport. Event bits values are:
spoof = 1
bpdu = 2
bgp = 4
ospf = 8
rip = 16
vrrp = 32
dhcp-server = 64
pim = 128
dvmrp = 256
is-is = 512
dnsrep… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.44 |
| alaQoSConfigAppliedUserportFilter Events/protocols to filter on a Userport. Event bits values are:
spoof = 1
bpdu = 2
bgp = 4
ospf = 8
rip = 16
vrrp = 32
dhcp-server = 64
pim = 128
dvmrp = 256
is-is = 512
dnsrep… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.45 |
| alaQoSConfigUserportShutdown Events/protocols that trigger admin down of a Userport.
Event bits values are:
spoof = 1
bpdu = 2
bgp = 4
ospf = 8
rip = 16
vrrp = 32
dhcp-server = 64
pim … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.46 |
| alaQoSConfigAppliedUserportShutdown Events/protocols that trigger admin down of a Userport.
Event bits values are:
spoof = 1
bpdu = 2
bgp = 4
ospf = 8
rip = 16
vrrp = 32
dhcp-server = 64
pim … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.47 |
| alaQoSConfigAutoNMS Flag to indicate whether to Prioritize NMS traffic by default. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.48 |
| alaQoSConfigAutoPhones Auto configure CSBU Phones
pri0-7 - will replace the priority.
trusted - will allow priority from the orginator to be used.
disable - will unconfigure to feature. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.49 |
| alaQoSConfigFlowTimeout Pending flow timeout (seconds). Flows are removed from
hardware/software if no traffic is seen for this many seconds.
Does not take effect until an 'Apply' command is issued | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.5 |
| alaQoSConfigQMPage Flag to indicate whether to send back a quarantined page when a client is quarantined but a remediation URL is not specified. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.50 |
| alaQoSConfigQMMACGroup Group name for quarantine manager quarantined MACs. | scalar | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.51 |
| alaQoSConfigQMPath Default path for remediation server redirect. | scalar | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.52 |
| alaQoSConfigDEIMapping This object specifies, in ingress traffic, the DEI/CFI bit is mapped
or not to internal drop precedence or yellow color.
enabled(1) -- the DEI/CFI bit is mapped to int… | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.53 |
| alaQoSConfigDEIMarking This object specifies, in egress traffic, the DEI/CFI bit is mapped
or not to internal drop precedence or yellow color.
enabled(1) -- the DEI/CFI bit is mapped to int… | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.54 |
| alaQoSConfigStatsResetEgress Set to reset global Egress QoS statistics counters | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.55 |
| alaQoSConfigForceYellowPriority Change the Priority for Yellow Traffic
pri0-7 - will replace the priority.
disable - will unconfigure to feature. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.56 |
| alaQoSConfigMulticastRateLimit Used to set rate Limit in case of Qos debug | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.57 |
| alaQoSConfigAppliedFlowTimeout Current flow timeout (seconds). Flows are removed from
hardware/software if no traffic is seen for this many seconds. | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.6 |
| alaQoSConfigUserportLinkShutdown Events/protocols that trigger link shut down of a Userport.
Event bits values are:
spoof = 1
bpdu = 2
bgp = 4
ospf = 8
rip = 16
vrrp = 32
dhcp-server = 64
pim = 128
dvmrp = 256
is… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.60 |
| alaQoSConfigAppliedUserportLinkShutdown Events/protocols that trigger Link shut down of a Userport.
Event bits values are:
spoof = 1
bpdu = 2
bgp = 4
ospf = 8
rip = 16
vrrp = 32
dhcp-server = 64
pim = 128
dvmrp = 256
is… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.61 |
| alaQoSConfigNATFlush Flush all NAT Flow entries | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.62 |
| alaQoSConfigFragmentTimeout Pending fragment timeout (seconds). Packet fragments are
remembered for this many seconds.
Does not take effect until an 'Apply' command is issued | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.7 |
| alaQoSConfigAppliedFragmentTimeout Current fragment timeout (seconds). Packet fragments are
remembered for this many seconds. | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.8 |
| alaQoSConfigReflexiveTimeout Pending reflexive timeout (seconds). Anticipate reverse flows
for reflexive and NAT connections for this long until we see a
response.
Does not take effect until an 'Apply' comma… | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.9 |