alaQoSConfigAppliedUserportFilter

ALCATEL-IND1-QOS-MIB · .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.45
MIB view Table view

Object

scalar SNMPv2-SMIInteger32 
Events/protocols to filter on a Userport.  Event bits values are:
spoof = 1
bpdu = 2
bgp = 4
ospf = 8
rip = 16
vrrp = 32
 dhcp-server = 64
pim = 128
dvmrp = 256
is-is = 512
dnsreply = 1024

Context

MIB
ALCATEL-IND1-QOS-MIB
OID
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.45
Type
scalar
Access
readonly
Status
current
Parent
alaQoSConfig
Siblings
59

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
alaQoSConfigEnabled
Is QoS enabled on the switch
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.1
alaQoSConfigAppliedReflfexiveTimeout
Current reflexive timeout (seconds). Anticipate reverse flows for reflexive and NAT connections for this long until we see a response.
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.10
alaQoSConfigNatTimeout
Pending nat timeout (seconds). Once traffic is seen in both directions for anticipated flows, length of time to remember the flow without seeing traffic in either direction. Does…
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.11
alaQoSConfigAppliedNatTimeout
Current nat timeout (seconds). Once traffic is seen in both directions for anticipated flows, length of time to remember the flow without seeing traffic in either direction.
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.12
alaQoSConfigClassifyl3Bridged
Pending indicator for looking at L3/L4 parameters of bridged traffic. Does not take effect until an 'Apply' command is issued.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.13
alaQoSConfigAppliedClassifyl3Bridged
Current indicator for looking at L3/L4 parameters of bridged traffic.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.14
alaQoSConfigClassifyFragments
Pending indicator for classifying fragmented traffic at L4 Does not take effect until an 'Apply' command is issued
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.15
alaQoSConfigAppliedClassifyFragments
Current indicator for classifying fragmented traffic at L4 Does not take effect until an 'Apply' command is issued
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.16
alaQoSConfigDefaultBridgedDisposition
Pending disposition of bridged traffic that doesn't match a policy. Does not take effect until an 'Apply' command is issued.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.17
alaQoSConfigAppliedDefaultBridgedDisposition
Current disposition of bridged traffic that doesn't match a policy.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.18
alaQoSConfigDefaultRoutedDisposition
Pending disposition of routed traffic that doesn't match a policy. Does not take effect until an 'Apply' command is issued.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.19
alaQoSConfigDefaultQueues
Pending number of default queues to create for each port. Can be overridden on a port by port basis. Does not take affect until an 'Apply' command is issued.
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.2
alaQoSConfigAppliedDefaultRoutedDisposition
Current disposition of routed traffic that doesn't match a policy
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.20
alaQoSConfigDefaultMulticastDisposition
Pending disposition of IGMP requests that don't match a policy Does not take effect until an 'Apply' command is issued
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.21
alaQoSConfigAppliedDefaultMulticastDisposition
Current disposition of IGMP requests that don't match a policy
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.22
alaQoSConfigStatsInterval
Interval in seconds for how often statistics are updated
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.23
alaQoSConfigLogLines
Number of log lines to maintain in the QoS log
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.24
alaQoSConfigLogLevel
The level of logging desired. The higher the level, the more verbose the logging
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.25
alaQoSConfigLogConsole
Whether QoS log events are logged to the console
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.26
alaQoSConfigForwardLog
Whether QoS forwards logging events to PolicyManager
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.27
alaQoSConfigClearLog
Clear the QoS log
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.28
alaQoSConfigApply
Set to apply all pending QoS configuration/policy changes
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.29
alaQoSConfigAppliedDefaultQueues
Number of default queues configured at last 'Apply' command.
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.3
alaQoSConfigRevert
Set to revert all pending QoS configuration/policy changes
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.30
alaQoSConfigReset
Set to reset global QoS configuration parameters to their default values
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.31
alaQoSConfigStatsReset
Set to reset global QoS statistics counters
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.32
alaQoSConfigFlush
Flush all pending policy objects
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.33
alaQoSConfigDebug
Possible debug flags for QoS
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.34
alaQoSConfigServicingMode
Servicing mode for the system
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.35
alaQoSConfigLowPriorityWeight
Weight to use for low priority queue(0) on fixed queue blades
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.36
alaQoSConfigMediumPriorityWeight
Weight to use for medium priority queue(1) on fixed queue blades
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.37
alaQoSConfigHighPriorityWeight
Weight to use for high priority queue(2) on fixed queue blades
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.38
alaQoSConfigUrgentPriorityWeight
Weight to use for urgent priority queue(3) on fixed queue blades
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.39
alaQoSConfigTrustPorts
Flag to indicate whether to trust the 802.1p/TOS values on incoming traffic by default. Can be overridden on a port by port basis.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.4
alaQoSConfigQ4PriorityWeight
Weight to use for COS 4 priority queue(4) on fixed queue blades
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.40
alaQoSConfigQ5PriorityWeight
Weight to use for COS 5 priority queue(5) on fixed queue blades
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.41
alaQoSConfigQ6PriorityWeight
Weight to use for COS 6 priority queue(6) on fixed queue blades
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.42
alaQoSConfigQ7PriorityWeight
Weight to use for COS 7 priority queue(7) on fixed queue blades
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.43
alaQoSConfigUserportFilter
Events/protocols to filter on a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim = 128 dvmrp = 256 is-is = 512 dnsrep…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.44
alaQoSConfigUserportShutdown
Events/protocols that trigger admin down of a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim …
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.46
alaQoSConfigAppliedUserportShutdown
Events/protocols that trigger admin down of a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim …
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.47
alaQoSConfigAutoNMS
Flag to indicate whether to Prioritize NMS traffic by default.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.48
alaQoSConfigAutoPhones
Auto configure CSBU Phones pri0-7 - will replace the priority. trusted - will allow priority from the orginator to be used. disable - will unconfigure to feature.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.49
alaQoSConfigFlowTimeout
Pending flow timeout (seconds). Flows are removed from hardware/software if no traffic is seen for this many seconds. Does not take effect until an 'Apply' command is issued
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.5
alaQoSConfigQMPage
Flag to indicate whether to send back a quarantined page when a client is quarantined but a remediation URL is not specified.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.50
alaQoSConfigQMMACGroup
Group name for quarantine manager quarantined MACs.
scalarOctetString.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.51
alaQoSConfigQMPath
Default path for remediation server redirect.
scalarOctetString.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.52
alaQoSConfigDEIMapping
This object specifies, in ingress traffic, the DEI/CFI bit is mapped or not to internal drop precedence or yellow color. enabled(1) -- the DEI/CFI bit is mapped to int…
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.53
alaQoSConfigDEIMarking
This object specifies, in egress traffic, the DEI/CFI bit is mapped or not to internal drop precedence or yellow color. enabled(1) -- the DEI/CFI bit is mapped to int…
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.54
alaQoSConfigStatsResetEgress
Set to reset global Egress QoS statistics counters
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.55
alaQoSConfigForceYellowPriority
Change the Priority for Yellow Traffic pri0-7 - will replace the priority. disable - will unconfigure to feature.
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.56
alaQoSConfigMulticastRateLimit
Used to set rate Limit in case of Qos debug
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.57
alaQoSConfigAppliedFlowTimeout
Current flow timeout (seconds). Flows are removed from hardware/software if no traffic is seen for this many seconds.
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.6
alaQoSConfigUserportLinkShutdown
Events/protocols that trigger link shut down of a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim = 128 dvmrp = 256 is…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.60
alaQoSConfigAppliedUserportLinkShutdown
Events/protocols that trigger Link shut down of a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim = 128 dvmrp = 256 is…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.61
alaQoSConfigNATFlush
Flush all NAT Flow entries
scalarEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.62
alaQoSConfigFragmentTimeout
Pending fragment timeout (seconds). Packet fragments are remembered for this many seconds. Does not take effect until an 'Apply' command is issued
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.7
alaQoSConfigAppliedFragmentTimeout
Current fragment timeout (seconds). Packet fragments are remembered for this many seconds.
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.8
alaQoSConfigReflexiveTimeout
Pending reflexive timeout (seconds). Anticipate reverse flows for reflexive and NAT connections for this long until we see a response. Does not take effect until an 'Apply' comma…
scalarInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.9