alaChasIssuForStackablesStatus
ALCATEL-IND1-CHASSIS-MIB ·
.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.15
Object
scalar
Enumeration
This object contains the status of ISSU. Enabled: Issu is in progress Disabled: Issu has not been started yet Aborted: Issu was aborted Successfull: ISSU was successfully completed
Context
- MIB
- ALCATEL-IND1-CHASSIS-MIB
- OID
.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.15- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- alcatelIND1ChassisMIBObjects
- Siblings
- 30
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | in-progress |
2 | disabled |
3 | aborted |
4 | successful |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| chasControlModuleTable This table contains one row for the primary control module. | table | - | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1 |
| chasSupervisionCmmCertifiedTable This table contains... | table | - | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.10 |
| alaChasEntPhysFanTable This table contains one row per physical fan entity. | table | - | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.11 |
| alaChasHashMode When set to brief, Hash mode is enabled.
When set to Extended, Hash mode is disabled. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.12 |
| alaChasUdpTcpPortMode The control is used to enable or disable UDP TCP
port hashing. This option is applicable only when
Hash mode is set to disabled (i.e. extended) | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.13 |
| alaChasNonUCHashControl This control is used to enable/disable
Load balance for non unicast traffic. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.14 |
| alaChasIssuForStackablesSlotsUpgraded This object contains the slot numbers that have been upgraded by ISSU. | scalar | OctetString | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.16 |
| alaChasIssuForStackablesSlotInProgress This object contains the slot number for which upgradation is in progress. | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.17 |
| alaChasIssuForStackablesSlotsLeft This object contains the slot numbers for which upgradation is still left. | scalar | OctetString | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.18 |
| alaChasFdbHashMode when set to xor, the hash configuration mode is set to default xor-mode.
when set to crc, the hash configuration mode is set to crc-mode. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.19 |
| chasControlRedundantTable This table contains one row per control module. There is always at least
one control module in the system. | table | - | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.2 |
| alaChasNonUCHashMode When set to brief, Hashing is based on SIP.
When set to normal, Hashing is based on SIP and DIP.
When set to Extended, Hashing is based on SIP, DIP and Mode port. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.21 |
| alaChasBpsUpdateFirmware This object is used to start BPS firmware update. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.22 |
| alaChasBpsMode This object is only applicable to BPS .Value is
used to specify current Mode of switch. | scalar | Enumeration | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.23 |
| alaChasBpsSystemTotalAvailablePower This value is only applicable to the BPS Module. It
corresponds to system total power available on BPS
This value is in Watts. | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.24 |
| alaChasBpsSystemTotalAllocation This value is only applicable to the BPS Modules. It
corresponds to total system power allocated by BPS
This value is in Watts. | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.25 |
| alaChasBpsPoeTotalAvailablePower This value is only applicable to the BPS Modules. It
corresponds to system total power available on BPS
This value is in Watts. | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.26 |
| alaChasBpsPoeTotalAllocation This value is only applicable to the Bps Modules. It
corresponds to total POE power allocated by BPS
This value is in Watts. | scalar | Integer32 | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.27 |
| alaChasBpsCpldRev This object contains the CPLD revision Number of the BPS | scalar | OctetString | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.28 |
| alaChasBpsMmcuRev This object contains the MMCU revision Number of the BPS | scalar | OctetString | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.29 |
| chasChassisTable This table contains one row per chassis. There is always at least one
chassis or many like for stackable product. | table | - | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3 |
| alaChasBpsCmcuRev This object contains the CMCU revision Number of the BPS | scalar | OctetString | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.30 |
| alaChasBpsTable This table contains BPS connector priority for each slot | table | - | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.31 |
| alaChasBpsPowerSupplyTable This table contains BPS power supplies details | table | - | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32 |
| chasSupervisionRfsLsTable This table contains a list of file on the remote chassis per directory. | table | - | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4 |
| alcatelIND1ChassisSupervisionRfsCommands Branch For Chassis Supervision RFS commands.
For rrm command the Slot, Command and SrcFileName are mandatory.
For rcp command the Slot, Command, SrcFileName and DestFileName
are m… | node | - | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5 |
| chasControlReloadStatusTable Table containing reload status of each network interface
slot or stack module | table | - | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.6 |
| chasGlobalControl | node | - | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.7 |
| chasSupervisionRfsDfTable This table contains information about file system size and use. | table | - | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.8 |
| chasSupervisionFlashMemTable This table contains the systems flash memory information. | table | - | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9 |