tmnxPeOutOfMemory
ALCATEL-ENT1-TIMETRA-CHASSIS-MIB ·
.1.3.6.1.4.1.6527.3.1.3.2.1.0.17
Object
notification
obsolete
Generated when there is an out of memory error detected.
This notification was made obsolete in the 2.1 release.
The tmnxPeOutOfMemory notification has been replaced
with the module specific notification from the
TIMETRA-SYSTEM-MIB: tmnxModuleMallocFailed.
Context
- MIB
- ALCATEL-ENT1-TIMETRA-CHASSIS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.3.2.1.0.17- Type
- notification
- Status
- obsolete
- Parent
- tmnxChassisNotification
- Siblings
- 43
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxHwConfigChange obsolete A tmnxHwConfigChange notification is generated when the value of
tmnxHwLastChange is updated. It can be used by the NMS to trigger
maintenance polls of the hardware configuration… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.1 |
| tmnxEqWrongCard Generated when the wrong type of card is inserted into a slot of
the chassis. Even though a card may be physically supported by
the slot, it may have been administratively config… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.10 |
| tmnxEqCpuFailure obsolete Generated when a failure is detected for a CPU on an IOM card or
CPM module.
This notification was made obsolete in the 2.1 release.
… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.11 |
| tmnxEqMemoryFailure obsolete Generated when a memory module failure is detected for an IOM card or
CPM module.
This notification was made obsolete in the 2.1 release.
… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.12 |
| tmnxEqBackdoorBusFailure obsolete Generated when the backdoor bus has failed.
This notification was made obsolete in the 2.1 release. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.13 |
| tmnxPeSoftwareError obsolete Generated when a software error has been detected.
This notification was made obsolete in the 2.1 release.
Many of the oth… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.14 |
| tmnxPeSoftwareAbnormalHalt obsolete Generated when the software has abnormally terminated.
This notification was made obsolete in the 2.1 release.
Many of the other notificatio… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.15 |
| tmnxPeSoftwareVersionMismatch Generated when there is a mismatch between software versions of the
active CPM and standby CPM or the CPM and IOM.
tmnxChassisNotifyHwIndex identifies the mismatched CPM/IOM card … | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.16 |
| tmnxPeConfigurationError obsolete Generated when a configuration error has been detected.
This notification was made obsolete in the 2.1 release.
Many other… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.18 |
| tmnxPeStorageProblem obsolete Generated when there is a storage capacity problem.
This notification was made obsolete in the 2.1 release.
The only 'stor… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.19 |
| tmnxEnvTempTooHigh Generated when the temperature sensor reading on an equipment
object is greater than its configured threshold. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.2 |
| tmnxPeCpuCyclesExceeded obsolete Generated when the CPU cycle usage limit has been exceeded.
This notification was made obsolete in the 2.1 release.
It doe… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.20 |
| tmnxRedPrimaryCPMFail Generated when the primary CPM fails. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.21 |
| tmnxRedSecondaryCPMStatusChange obsolete Generated when there is a change in the secondary CPM status.
This notification was made obsolete in the 2.1 release.
Ther… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.22 |
| tmnxRedRestoreSuccess obsolete Generated when the secondary CPM successfully restores
the config and state.
This notification was made obsolete in the 2.1 release.
… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.23 |
| tmnxRedRestoreFail obsolete Generated when the secondary CPM fails to
restore the config and state.
This notification was made obsolete in the 2.1 release.
… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.24 |
| tmnxChassisNotificationClear A trap indicating the clear of a chassis notification
identified by tmnxChassisNotifyOID. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.25 |
| tmnxEqSyncIfTimingHoldover Generated when the synchronous equipment timing subsystem
transitions into a holdover state.
This notification will have the same indices as those of
the tmnxCpmCardTable. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.26 |
| tmnxEqSyncIfTimingHoldoverClear Generated when the synchronous equipment timing subsystem
transitions out of the holdover state.
This notification will have the same indices as those of
the tmnxCpmCardTable. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.27 |
| tmnxEqSyncIfTimingRef1Alarm Generated when an alarm condition on the first timing
reference is detected.
This notification will have the same indices as those of
the tmnxCpmCardTable. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.28 |
| tmnxEqSyncIfTimingRef1AlarmClear Generated when an alarm condition on the first timing
reference is cleared.
This notification will have the same indices as those of
the tmnxCpmCardTable. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.29 |
| tmnxEqPowerSupplyFailure Generated when one of the chassis's power supplies fails. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.3 |
| tmnxEqSyncIfTimingRef2Alarm Generated when an alarm condition on the second timing
reference is detected.
This notification will have the same indices as those of
the tmnxCpmCardTable. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.30 |
| tmnxEqSyncIfTimingRef2AlarmClear Generated when an alarm condition on the second timing
reference is cleared.
This notification will have the same indices as those of
the tmnxCpmCardTable. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.31 |
| tmnxEqFlashDataLoss tmnxEqFlashDataLoss is generated when there was an error
while data was getting written on to the compact flash. This
notification indicates a probable data loss. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.32 |
| tmnxEqFlashDiskFull tmnxEqFlashDiskFull is generated when there is no space
left on the compact flash. No more data can be written to it. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.33 |
| tmnxPeSoftwareLoadFailed Generated when the CPM fails to load the software from a specified
location.
tmnxChassisNotifyHwIndex identifies the card for which the software
load failed and tmnxChassisNotify… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.34 |
| tmnxPeBootloaderVersionMismatch Generated when there is a mismatch between the CPM and boot loader
versions. tmnxChassisNotifyHwIndex identifies the CPM card.
tmnxChassisNotifyMismatchedVer contains the mismatc… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.35 |
| tmnxPeBootromVersionMismatch Generated when there is a mismatch between the boot rom versions.
tmnxChassisNotifyHwIndex identifies the IOM card.
tmnxChassisNotifyMismatchedVer contains the mismatched version… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.36 |
| tmnxPeFPGAVersionMismatch Generated when there is a mismatch between the FPGA versions.
tmnxChassisNotifyHwIndex identifies the IOM card.
tmnxChassisNotifyMismatchedVer contains the mismatched version of
… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.37 |
| tmnxEqSyncIfTimingBITSAlarm Generated when an alarm condition on the BITS timing
reference is detected.
This notification will have the same indices as those of
the tmnxCpmCardTable. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.38 |
| tmnxEqSyncIfTimingBITSAlarmClear Generated when an alarm condition on the BITS timing
reference is cleared.
This notification will have the same indices as those of
the tmnxCpmCardTable. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.39 |
| tmnxEqPowerSupplyInserted Generated when one of the chassis's power supplies is inserted. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.4 |
| tmnxEqCardFirmwareUpgraded Generated when a card is hot-inserted into the chassis and its
firmware is automatically upgraded. The card type may be IOM or
CPM module. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.40 |
| tmnxChassisUpgradeInProgress The tmnxChassisUpgradeInProgress notification is generated only
after a CPM switchover occurs and the new active CPM is running new
software, while the IOMs are still running old … | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.41 |
| tmnxChassisUpgradeComplete The tmnxChassisUpgradeComplete notification is generated to
indicate that all the IOMs are running matching software version in
reference to the active CPM software version chang… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.42 |
| tmnxChassisHiBwMcastAlarm The tmnxChassisHiBwMcastAlarm notification is generated when a plane
is shared by more than one high bandwidth multicast tap. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.43 |
| tmnxEqMdaCfgNotCompatible Generated when a supported MDA is inserted into a slot of an
IOM, the MDA is compatible with the currently provisioned
MDA, but the current configuration on the MDA's ports is not… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.44 |
| tmnxEqPowerSupplyRemoved Generated when one of the chassis's power supplies is removed. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.5 |
| tmnxEqFanFailure Generated when one of the fans in a fan tray has failed. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.6 |
| tmnxEqCardFailure Generated when one of the cards in a chassis has failed. The card
type may be IOM, Fabric, MDA, MCM, CCM, CPM module, compact flash
module, etc. tmnxChassisNotifyCardFailureReaso… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.7 |
| tmnxEqCardInserted Generated when a card is inserted into the chassis. The card type
may be IOM, Fabric, MDA, MCM, CCM CPM module, compact flash module,
etc. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.8 |
| tmnxEqCardRemoved Generated when a card is removed from the chassis. The card type
may be IOM, Fabric, MDA, MCM, CCM, CPM module, compact flash module,
etc. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxChassisNotifyHwIndex Used by tmnx chassis and port Notifications, indicates the entry
in the tmnxHwTable for the hardware component associated with an
alarm. | scalar | TmnxHwIndex | .1.3.6.1.4.1.6527.3.1.2.2.6.4 |
| tmnxHwID The value of tmnxHwID is an object identifier that points to
the table and row entry with additional management information
specific to this hardware component's class. | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.6527.3.1.2.2.1.8.1.2 |
| tmnxHwClass The value of tmnxHwClass indicates the general hardware type of this
component. If no appropriate enumeration exists for this hardware
component then the value 'other (1)' is u… | column | TmnxHwClass | .1.3.6.1.4.1.6527.3.1.2.2.1.8.1.7 |