tmnxEqSyncIfTimingHoldover
ALCATEL-ENT1-TIMETRA-CHASSIS-MIB ·
.1.3.6.1.4.1.6527.3.1.3.2.1.0.26
Object
notification
Generated when the synchronous equipment timing subsystem transitions into a holdover state. This notification will have the same indices as those of the tmnxCpmCardTable.
Context
- MIB
- ALCATEL-ENT1-TIMETRA-CHASSIS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.3.2.1.0.26- Type
- notification
- Status
- current
- Parent
- tmnxChassisNotification
- Siblings
- 43
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxHwConfigChange obsolete A tmnxHwConfigChange notification is generated when the value of
tmnxHwLastChange is updated. It can be used by the NMS to trigger
maintenance polls of the hardware configuration… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.1 |
| tmnxEqWrongCard Generated when the wrong type of card is inserted into a slot of
the chassis. Even though a card may be physically supported by
the slot, it may have been administratively config… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.10 |
| tmnxEqCpuFailure obsolete Generated when a failure is detected for a CPU on an IOM card or
CPM module.
This notification was made obsolete in the 2.1 release.
… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.11 |
| tmnxEqMemoryFailure obsolete Generated when a memory module failure is detected for an IOM card or
CPM module.
This notification was made obsolete in the 2.1 release.
… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.12 |
| tmnxEqBackdoorBusFailure obsolete Generated when the backdoor bus has failed.
This notification was made obsolete in the 2.1 release. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.13 |
| tmnxPeSoftwareError obsolete Generated when a software error has been detected.
This notification was made obsolete in the 2.1 release.
Many of the oth… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.14 |
| tmnxPeSoftwareAbnormalHalt obsolete Generated when the software has abnormally terminated.
This notification was made obsolete in the 2.1 release.
Many of the other notificatio… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.15 |
| tmnxPeSoftwareVersionMismatch Generated when there is a mismatch between software versions of the
active CPM and standby CPM or the CPM and IOM.
tmnxChassisNotifyHwIndex identifies the mismatched CPM/IOM card … | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.16 |
| tmnxPeOutOfMemory obsolete Generated when there is an out of memory error detected.
This notification was made obsolete in the 2.1 release.
The tmnxP… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.17 |
| tmnxPeConfigurationError obsolete Generated when a configuration error has been detected.
This notification was made obsolete in the 2.1 release.
Many other… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.18 |
| tmnxPeStorageProblem obsolete Generated when there is a storage capacity problem.
This notification was made obsolete in the 2.1 release.
The only 'stor… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.19 |
| tmnxEnvTempTooHigh Generated when the temperature sensor reading on an equipment
object is greater than its configured threshold. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.2 |
| tmnxPeCpuCyclesExceeded obsolete Generated when the CPU cycle usage limit has been exceeded.
This notification was made obsolete in the 2.1 release.
It doe… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.20 |
| tmnxRedPrimaryCPMFail Generated when the primary CPM fails. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.21 |
| tmnxRedSecondaryCPMStatusChange obsolete Generated when there is a change in the secondary CPM status.
This notification was made obsolete in the 2.1 release.
Ther… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.22 |
| tmnxRedRestoreSuccess obsolete Generated when the secondary CPM successfully restores
the config and state.
This notification was made obsolete in the 2.1 release.
… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.23 |
| tmnxRedRestoreFail obsolete Generated when the secondary CPM fails to
restore the config and state.
This notification was made obsolete in the 2.1 release.
… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.24 |
| tmnxChassisNotificationClear A trap indicating the clear of a chassis notification
identified by tmnxChassisNotifyOID. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.25 |
| tmnxEqSyncIfTimingHoldoverClear Generated when the synchronous equipment timing subsystem
transitions out of the holdover state.
This notification will have the same indices as those of
the tmnxCpmCardTable. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.27 |
| tmnxEqSyncIfTimingRef1Alarm Generated when an alarm condition on the first timing
reference is detected.
This notification will have the same indices as those of
the tmnxCpmCardTable. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.28 |
| tmnxEqSyncIfTimingRef1AlarmClear Generated when an alarm condition on the first timing
reference is cleared.
This notification will have the same indices as those of
the tmnxCpmCardTable. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.29 |
| tmnxEqPowerSupplyFailure Generated when one of the chassis's power supplies fails. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.3 |
| tmnxEqSyncIfTimingRef2Alarm Generated when an alarm condition on the second timing
reference is detected.
This notification will have the same indices as those of
the tmnxCpmCardTable. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.30 |
| tmnxEqSyncIfTimingRef2AlarmClear Generated when an alarm condition on the second timing
reference is cleared.
This notification will have the same indices as those of
the tmnxCpmCardTable. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.31 |
| tmnxEqFlashDataLoss tmnxEqFlashDataLoss is generated when there was an error
while data was getting written on to the compact flash. This
notification indicates a probable data loss. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.32 |
| tmnxEqFlashDiskFull tmnxEqFlashDiskFull is generated when there is no space
left on the compact flash. No more data can be written to it. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.33 |
| tmnxPeSoftwareLoadFailed Generated when the CPM fails to load the software from a specified
location.
tmnxChassisNotifyHwIndex identifies the card for which the software
load failed and tmnxChassisNotify… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.34 |
| tmnxPeBootloaderVersionMismatch Generated when there is a mismatch between the CPM and boot loader
versions. tmnxChassisNotifyHwIndex identifies the CPM card.
tmnxChassisNotifyMismatchedVer contains the mismatc… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.35 |
| tmnxPeBootromVersionMismatch Generated when there is a mismatch between the boot rom versions.
tmnxChassisNotifyHwIndex identifies the IOM card.
tmnxChassisNotifyMismatchedVer contains the mismatched version… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.36 |
| tmnxPeFPGAVersionMismatch Generated when there is a mismatch between the FPGA versions.
tmnxChassisNotifyHwIndex identifies the IOM card.
tmnxChassisNotifyMismatchedVer contains the mismatched version of
… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.37 |
| tmnxEqSyncIfTimingBITSAlarm Generated when an alarm condition on the BITS timing
reference is detected.
This notification will have the same indices as those of
the tmnxCpmCardTable. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.38 |
| tmnxEqSyncIfTimingBITSAlarmClear Generated when an alarm condition on the BITS timing
reference is cleared.
This notification will have the same indices as those of
the tmnxCpmCardTable. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.39 |
| tmnxEqPowerSupplyInserted Generated when one of the chassis's power supplies is inserted. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.4 |
| tmnxEqCardFirmwareUpgraded Generated when a card is hot-inserted into the chassis and its
firmware is automatically upgraded. The card type may be IOM or
CPM module. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.40 |
| tmnxChassisUpgradeInProgress The tmnxChassisUpgradeInProgress notification is generated only
after a CPM switchover occurs and the new active CPM is running new
software, while the IOMs are still running old … | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.41 |
| tmnxChassisUpgradeComplete The tmnxChassisUpgradeComplete notification is generated to
indicate that all the IOMs are running matching software version in
reference to the active CPM software version chang… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.42 |
| tmnxChassisHiBwMcastAlarm The tmnxChassisHiBwMcastAlarm notification is generated when a plane
is shared by more than one high bandwidth multicast tap. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.43 |
| tmnxEqMdaCfgNotCompatible Generated when a supported MDA is inserted into a slot of an
IOM, the MDA is compatible with the currently provisioned
MDA, but the current configuration on the MDA's ports is not… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.44 |
| tmnxEqPowerSupplyRemoved Generated when one of the chassis's power supplies is removed. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.5 |
| tmnxEqFanFailure Generated when one of the fans in a fan tray has failed. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.6 |
| tmnxEqCardFailure Generated when one of the cards in a chassis has failed. The card
type may be IOM, Fabric, MDA, MCM, CCM, CPM module, compact flash
module, etc. tmnxChassisNotifyCardFailureReaso… | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.7 |
| tmnxEqCardInserted Generated when a card is inserted into the chassis. The card type
may be IOM, Fabric, MDA, MCM, CCM CPM module, compact flash module,
etc. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.8 |
| tmnxEqCardRemoved Generated when a card is removed from the chassis. The card type
may be IOM, Fabric, MDA, MCM, CCM, CPM module, compact flash module,
etc. | notification | - | .1.3.6.1.4.1.6527.3.1.3.2.1.0.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxChassisNotifyHwIndex Used by tmnx chassis and port Notifications, indicates the entry
in the tmnxHwTable for the hardware component associated with an
alarm. | scalar | TmnxHwIndex | .1.3.6.1.4.1.6527.3.1.2.2.6.4 |
| tmnxHwID The value of tmnxHwID is an object identifier that points to
the table and row entry with additional management information
specific to this hardware component's class. | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.6527.3.1.2.2.1.8.1.2 |
| tmnxHwClass The value of tmnxHwClass indicates the general hardware type of this
component. If no appropriate enumeration exists for this hardware
component then the value 'other (1)' is u… | column | TmnxHwClass | .1.3.6.1.4.1.6527.3.1.2.2.1.8.1.7 |