agentFileTransfer
AGENT-GENERAL-MIB ·
.1.3.6.1.4.1.171.12.1.2.2
Object
scalar
obsolete
r/w
Enumeration
This object will execute the download or upload action. If start (2) is chosen, it will
begin to download/upload and no reset will follow. If start-and-reset (3) is chosen,
then the reset will be activated after completing the download or upload.
No action if noaction (4) is chosen.
Note:
Because these functions will be limited by the support for the system in question,
some of the selected items will be invalid. When the user selects an invalid entry,
the system will respond with a bad-value status.
Context
- MIB
- AGENT-GENERAL-MIB
- OID
.1.3.6.1.4.1.171.12.1.2.2- Type
- scalar
- Access
- readwrite
- Status
- obsolete
- Parent
- agentBasicConfig
- Siblings
- 28
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agentBscSwFileTable A list of MIB Basic Config entry support files updated by this agent. | table | - | .1.3.6.1.4.1.171.12.1.2.1 |
| agentTrustedHostMgmt | node | - | .1.3.6.1.4.1.171.12.1.2.10 |
| agentFDBMgmt | node | - | .1.3.6.1.4.1.171.12.1.2.11 |
| agentARPMgmt | node | - | .1.3.6.1.4.1.171.12.1.2.12 |
| swMultiImageCtrlTable | table | - | .1.3.6.1.4.1.171.12.1.2.13 |
| agentOutOfBandDataBits This object indicates the out-of-band data bits. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.171.12.1.2.14 |
| agentOutOfBandParityBits This object indicates the out-of-band parity bits. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.171.12.1.2.15 |
| agentOutOfBandStopBits This object indicates the out-of-band stop bits. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.171.12.1.2.16 |
| agentOutOfBandAutoLogoutConfig This object allows the user to specify an out-of-band auto logout time. | scalar | Enumeration | .1.3.6.1.4.1.171.12.1.2.17 |
| agentBscFileSystemMgmt | node | - | .1.3.6.1.4.1.171.12.1.2.18 |
| agentReboot Used to restart the switch. | scalar | Enumeration | .1.3.6.1.4.1.171.12.1.2.19 |
| agentReset Used to reset all switch parameters.
none (1): No action. This is the default value of this object.
config (2): All parameters are reset to default settings.
… | scalar | Enumeration | .1.3.6.1.4.1.171.12.1.2.20 |
| agentFTPFileTable A list of the MIB Basic Config entries support files updated by this agent. | table | - | .1.3.6.1.4.1.171.12.1.2.21 |
| agentSnmpTrapState This object indicates if the SNMP trap is enabled or disabled. | scalar | Enumeration | .1.3.6.1.4.1.171.12.1.2.22 |
| agentOutOfBandMgmt | node | - | .1.3.6.1.4.1.171.12.1.2.23 |
| agentTrapMgmt | node | - | .1.3.6.1.4.1.171.12.1.2.24 |
| agentFTPFileSystemTable The FTP management table for the file system | table | - | .1.3.6.1.4.1.171.12.1.2.25 |
| agentBscCMDLogState This object indicates the command logging state. | scalar | Enumeration | .1.3.6.1.4.1.171.12.1.2.26 |
| agentBscBroadcastPingReplyState This object indicates the broadcast ping reply state. | scalar | Enumeration | .1.3.6.1.4.1.171.12.1.2.27 |
| agentBscTftpConfigMgmt | node | - | .1.3.6.1.4.1.171.12.1.2.28 |
| agentBscCommunityEncryptionState This object indicates the encryption state on the SNMP community string. | scalar | Enumeration | .1.3.6.1.4.1.171.12.1.2.29 |
| agentSystemReset deprecated This object indicates the agent system reset state. Setting this
object to no-reset (4) has no effect. Setting this object to
cold-start (2) or warm-start (3) will reset the agent… | scalar | Enumeration | .1.3.6.1.4.1.171.12.1.2.3 |
| agentRs232PortConfig This object indicates the RS-232C mode once the device has restarted. | scalar | Enumeration | .1.3.6.1.4.1.171.12.1.2.4 |
| agentOutOfBandBaudRateConfig obsolete This object allows the user to specify an out-of-band baud rate, which
will take effect upon system restart.
Note:
Because these functions will … | scalar | Enumeration | .1.3.6.1.4.1.171.12.1.2.5 |
| agentSaveCfg This object indicates the type of save command to be executed, when saving to NV-RAM.
other (1) - None of the following.
cfg-id1 (2) - Save configuration ID1.
cfg-id2 (3)- Save co… | scalar | Enumeration | .1.3.6.1.4.1.171.12.1.2.6 |
| swMultiImageInfoTable | table | - | .1.3.6.1.4.1.171.12.1.2.7 |
| agentMultiCfgMgmt | node | - | .1.3.6.1.4.1.171.12.1.2.8 |
| systemSeverityControlMgmt | node | - | .1.3.6.1.4.1.171.12.1.2.9 |