agentBscCommunityEncryptionState
AGENT-GENERAL-MIB ·
.1.3.6.1.4.1.171.12.1.2.29
Object
scalar
r/w
Enumeration
This object indicates the encryption state on the SNMP community string.
Context
- MIB
- AGENT-GENERAL-MIB
- OID
.1.3.6.1.4.1.171.12.1.2.29- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- agentBasicConfig
- Siblings
- 28
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agentBscSwFileTable A list of MIB Basic Config entry support files updated by this agent. | table | - | .1.3.6.1.4.1.171.12.1.2.1 |
| agentTrustedHostMgmt | node | - | .1.3.6.1.4.1.171.12.1.2.10 |
| agentFDBMgmt | node | - | .1.3.6.1.4.1.171.12.1.2.11 |
| agentARPMgmt | node | - | .1.3.6.1.4.1.171.12.1.2.12 |
| swMultiImageCtrlTable | table | - | .1.3.6.1.4.1.171.12.1.2.13 |
| agentOutOfBandDataBits This object indicates the out-of-band data bits. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.171.12.1.2.14 |
| agentOutOfBandParityBits This object indicates the out-of-band parity bits. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.171.12.1.2.15 |
| agentOutOfBandStopBits This object indicates the out-of-band stop bits. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.171.12.1.2.16 |
| agentOutOfBandAutoLogoutConfig This object allows the user to specify an out-of-band auto logout time. | scalar | Enumeration | .1.3.6.1.4.1.171.12.1.2.17 |
| agentBscFileSystemMgmt | node | - | .1.3.6.1.4.1.171.12.1.2.18 |
| agentReboot Used to restart the switch. | scalar | Enumeration | .1.3.6.1.4.1.171.12.1.2.19 |
| agentFileTransfer obsolete This object will execute the download or upload action. If start (2) is chosen, it will
begin to download/upload and no reset will follow. If start-and-reset (3) is chosen,
then t… | scalar | Enumeration | .1.3.6.1.4.1.171.12.1.2.2 |
| agentReset Used to reset all switch parameters.
none (1): No action. This is the default value of this object.
config (2): All parameters are reset to default settings.
… | scalar | Enumeration | .1.3.6.1.4.1.171.12.1.2.20 |
| agentFTPFileTable A list of the MIB Basic Config entries support files updated by this agent. | table | - | .1.3.6.1.4.1.171.12.1.2.21 |
| agentSnmpTrapState This object indicates if the SNMP trap is enabled or disabled. | scalar | Enumeration | .1.3.6.1.4.1.171.12.1.2.22 |
| agentOutOfBandMgmt | node | - | .1.3.6.1.4.1.171.12.1.2.23 |
| agentTrapMgmt | node | - | .1.3.6.1.4.1.171.12.1.2.24 |
| agentFTPFileSystemTable The FTP management table for the file system | table | - | .1.3.6.1.4.1.171.12.1.2.25 |
| agentBscCMDLogState This object indicates the command logging state. | scalar | Enumeration | .1.3.6.1.4.1.171.12.1.2.26 |
| agentBscBroadcastPingReplyState This object indicates the broadcast ping reply state. | scalar | Enumeration | .1.3.6.1.4.1.171.12.1.2.27 |
| agentBscTftpConfigMgmt | node | - | .1.3.6.1.4.1.171.12.1.2.28 |
| agentSystemReset deprecated This object indicates the agent system reset state. Setting this
object to no-reset (4) has no effect. Setting this object to
cold-start (2) or warm-start (3) will reset the agent… | scalar | Enumeration | .1.3.6.1.4.1.171.12.1.2.3 |
| agentRs232PortConfig This object indicates the RS-232C mode once the device has restarted. | scalar | Enumeration | .1.3.6.1.4.1.171.12.1.2.4 |
| agentOutOfBandBaudRateConfig obsolete This object allows the user to specify an out-of-band baud rate, which
will take effect upon system restart.
Note:
Because these functions will … | scalar | Enumeration | .1.3.6.1.4.1.171.12.1.2.5 |
| agentSaveCfg This object indicates the type of save command to be executed, when saving to NV-RAM.
other (1) - None of the following.
cfg-id1 (2) - Save configuration ID1.
cfg-id2 (3)- Save co… | scalar | Enumeration | .1.3.6.1.4.1.171.12.1.2.6 |
| swMultiImageInfoTable | table | - | .1.3.6.1.4.1.171.12.1.2.7 |
| agentMultiCfgMgmt | node | - | .1.3.6.1.4.1.171.12.1.2.8 |
| systemSeverityControlMgmt | node | - | .1.3.6.1.4.1.171.12.1.2.9 |