adTa5kSmLossOfNetworkStpActive
ADTRAN-TA5K-SM-MIB ·
.1.3.6.1.4.1.664.1.750.0.21
Object
notification
deprecated
Indicates that the loss of network STP alarm active
Context
- MIB
- ADTRAN-TA5K-SM-MIB
- OID
.1.3.6.1.4.1.664.1.750.0.21- Type
- notification
- Status
- deprecated
- Parent
- adTa5kSmAlarms
- Siblings
- 41
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adTa5kSmSfpFaultClear Indicates that the SFP fault has cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.10 |
| adTa5kSmSfpFaultActive Indicates that the SFP fault is active | notification | - | .1.3.6.1.4.1.664.1.750.0.11 |
| adTa5kSmMultipleUplinksClear deprecated Indicates that the multiple uplink alarm has cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.12 |
| adTa5kSmMultipleUplinksDetected deprecated Indicates that multiple uplinks have been detected | notification | - | .1.3.6.1.4.1.664.1.750.0.13 |
| adTa5kSmExtAFailureClear Indicates that the ExtA timing failure has been cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.14 |
| adTa5kSmExtAFailureActive Indicates that the ExtA timing has failed | notification | - | .1.3.6.1.4.1.664.1.750.0.15 |
| adTa5kSmExtBFailureClear Indicates that the ExtB timing failure has been cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.16 |
| adTa5kSmExtBFailureActive Indicates that the ExtA timing has failed | notification | - | .1.3.6.1.4.1.664.1.750.0.17 |
| adTa5kSmLossOfHeartbeatClear Indicates that the loss of heartbeat alarm cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.18 |
| adTa5kSmLossOfHeartbeatActive Indicates that the loss of heartbeat alarm is active | notification | - | .1.3.6.1.4.1.664.1.750.0.19 |
| adTa5kSmTimingSrcClear deprecated Indicates that the primary and/or secondary timing source alarm has cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.2 |
| adTa5kSmLossOfNetworkStpClear deprecated Indicates that the loss of network STP alarm cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.20 |
| adTa5kSmDuplicateNodeClear Indicates that the duplicate node alarm has been cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.22 |
| adTa5kSmDuplicateNodeActive Indicates that the duplicate node alarm is active | notification | - | .1.3.6.1.4.1.664.1.750.0.23 |
| adTa5kSmDuplicateScmIpClear Indicates that the duplicate SCM IP address alarm has been cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.24 |
| adTa5kSmDuplicateScmIpActive Indicates that the duplicate SCM IP address alarm is active | notification | - | .1.3.6.1.4.1.664.1.750.0.25 |
| adTa5kSmBandwidthFullClear Indicates that the Bandwidth full alarm has been cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.26 |
| adTa5kSmBandwidthFull Indicates that the Bandwidth full alarm is active | notification | - | .1.3.6.1.4.1.664.1.750.0.27 |
| adTa5kSmPriTimingSrcClear deprecated Indicates that the primary timing source alarm has cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.28 |
| adTa5kSmPriTimingSrcFail deprecated Indicates that the primary timing source has failed | notification | - | .1.3.6.1.4.1.664.1.750.0.29 |
| adTa5kSmTimingSrcFail deprecated Indicates that the primary and/or secondary timing source has failed | notification | - | .1.3.6.1.4.1.664.1.750.0.3 |
| adTa5kSmSecTimingSrcClear deprecated Indicates that the secondary timing source alarm has cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.30 |
| adTa5kSmSecTimingSrcFail deprecated Indicates that the secondary timing source has failed | notification | - | .1.3.6.1.4.1.664.1.750.0.31 |
| adTa5kSmNodeNumberProvClear Indicates that the shelf's node number has been provisioned and is not zero. | notification | - | .1.3.6.1.4.1.664.1.750.0.32 |
| adTa5kSmNodeNumberDefault Indicates that the shelf's node number has not been provisioned. | notification | - | .1.3.6.1.4.1.664.1.750.0.33 |
| adTa5kSmMgmtVlanFailClear Indicates that the SM's failure to communicate the Internal Management VLAN to an access module has cleared. | notification | - | .1.3.6.1.4.1.664.1.750.0.34 |
| adTa5kSmMgmtVlanFail Indicates that the SM has failed to communicate the Internal Management VLAN to an access module. | notification | - | .1.3.6.1.4.1.664.1.750.0.35 |
| adTa5kSmioMismatchClear Indicates that either there is no hardware incompatibility among the SM cards
and SMIO Or ERPS/CSLAG is not provisioned. | notification | - | .1.3.6.1.4.1.664.1.750.0.36 |
| adTa5kSmioMismatch Indicates that attempts for provisioning of ERPS or CSLAG is made and hardware incompatibility detected
among SM and SMIO | notification | - | .1.3.6.1.4.1.664.1.750.0.37 |
| adTa5kSmBackPlaneRateFallbackClear Indicates that the AM is out of Backplane Rate Fallback mode.
adGenSlotInfoIndex indicates the slot of the card sending the alarm,
which is always the active SM.
ifIndex indicates… | notification | - | .1.3.6.1.4.1.664.1.750.0.38 |
| adTa5kSmBackPlaneRateFallback Indicates that the AM is in Backplane Rate Fallback mode.
adGenSlotInfoIndex indicates the slot of the card sending the alarm,
which is always the active SM.
ifIndex indicates the… | notification | - | .1.3.6.1.4.1.664.1.750.0.39 |
| adTa5kSmRingGenClear Indicates ring generator alarm clear | notification | - | .1.3.6.1.4.1.664.1.750.0.4 |
| adTa5kSmPeerLinkDownClear Indicates that the link status of the high speed peer interface between redundant switch modules is up.
ifIndex indicates the associated peer port interface | notification | - | .1.3.6.1.4.1.664.1.750.0.40 |
| adTa5kSmPeerLinkDown Indicates that the link status of the high speed peer interface between redundant switch modules is down.
ifIndex indicates the associated peer port interface | notification | - | .1.3.6.1.4.1.664.1.750.0.41 |
| adTa5kSmBackPlaneIncompatibleClear Indicates that the Backplane Incompatible alarm has been cleared. | notification | - | .1.3.6.1.4.1.664.1.750.0.42 |
| adTa5kSmBackPlaneIncompatibleActive Indicates that SM cards are not capable of full backplane speeds to some slots in the chassis. | notification | - | .1.3.6.1.4.1.664.1.750.0.43 |
| adTa5kSmRingGenFail Indicates that the ring generator has failed | notification | - | .1.3.6.1.4.1.664.1.750.0.5 |
| adTa5kSmPowerLimitAlmClear Indicates that the power limit alarm has cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.6 |
| adTa5kSmPowerLimitExceeded Indicates that the shelf power limit has been exceeded | notification | - | .1.3.6.1.4.1.664.1.750.0.7 |
| adTa5kSmUnknownSfpClear Indicates that the unknown SFP alarm has cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.8 |
| adTa5kSmUnknownSfpAlarm Indicates that the unknown SFP alarm is active | notification | - | .1.3.6.1.4.1.664.1.750.0.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ADTRAN-GENTRAPINFORM-MIBadTrapInformSeqNum The sequence number included in the last trap originated by
this device. This can be used to confirm receipt of the
latest traps. Not needed by SNMPv2 Informs. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.16.1.2 |
| SNMPv2-MIBsysName An administratively-assigned name for this managed
node. By convention, this is the node's fully-qualified
domain name. If the name is unknown, the value is
the zero-length stri… | scalar | OctetString | .1.3.6.1.2.1.1.5 |
| ADTRAN-GENSLOT-MIBadGenSlotInfoIndex A unique value for each slot. Its value may exceed
the value of adGenSlotNumber if pseudo slot numbers
are used for some bank commons or multiplexers.
This object is visible for … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.13.2.3.1.1 |
| ADTRAN-GENPORT-MIBadGenPortTrapIdentifier A character string to identify the name of a port.
Used for trap varbind in last trap sent.
Should default to port number string.
Can be overridden by customer as desired. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.13.3.3.1.11 |