adTa5kSmBackPlaneRateFallbackClear
ADTRAN-TA5K-SM-MIB ·
.1.3.6.1.4.1.664.1.750.0.38
Object
notification
Indicates that the AM is out of Backplane Rate Fallback mode. adGenSlotInfoIndex indicates the slot of the card sending the alarm, which is always the active SM. ifIndex indicates the associated backplane port interface at fault.
Context
- MIB
- ADTRAN-TA5K-SM-MIB
- OID
.1.3.6.1.4.1.664.1.750.0.38- Type
- notification
- Status
- current
- Parent
- adTa5kSmAlarms
- Siblings
- 41
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adTa5kSmSfpFaultClear Indicates that the SFP fault has cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.10 |
| adTa5kSmSfpFaultActive Indicates that the SFP fault is active | notification | - | .1.3.6.1.4.1.664.1.750.0.11 |
| adTa5kSmMultipleUplinksClear deprecated Indicates that the multiple uplink alarm has cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.12 |
| adTa5kSmMultipleUplinksDetected deprecated Indicates that multiple uplinks have been detected | notification | - | .1.3.6.1.4.1.664.1.750.0.13 |
| adTa5kSmExtAFailureClear Indicates that the ExtA timing failure has been cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.14 |
| adTa5kSmExtAFailureActive Indicates that the ExtA timing has failed | notification | - | .1.3.6.1.4.1.664.1.750.0.15 |
| adTa5kSmExtBFailureClear Indicates that the ExtB timing failure has been cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.16 |
| adTa5kSmExtBFailureActive Indicates that the ExtA timing has failed | notification | - | .1.3.6.1.4.1.664.1.750.0.17 |
| adTa5kSmLossOfHeartbeatClear Indicates that the loss of heartbeat alarm cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.18 |
| adTa5kSmLossOfHeartbeatActive Indicates that the loss of heartbeat alarm is active | notification | - | .1.3.6.1.4.1.664.1.750.0.19 |
| adTa5kSmTimingSrcClear deprecated Indicates that the primary and/or secondary timing source alarm has cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.2 |
| adTa5kSmLossOfNetworkStpClear deprecated Indicates that the loss of network STP alarm cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.20 |
| adTa5kSmLossOfNetworkStpActive deprecated Indicates that the loss of network STP alarm active | notification | - | .1.3.6.1.4.1.664.1.750.0.21 |
| adTa5kSmDuplicateNodeClear Indicates that the duplicate node alarm has been cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.22 |
| adTa5kSmDuplicateNodeActive Indicates that the duplicate node alarm is active | notification | - | .1.3.6.1.4.1.664.1.750.0.23 |
| adTa5kSmDuplicateScmIpClear Indicates that the duplicate SCM IP address alarm has been cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.24 |
| adTa5kSmDuplicateScmIpActive Indicates that the duplicate SCM IP address alarm is active | notification | - | .1.3.6.1.4.1.664.1.750.0.25 |
| adTa5kSmBandwidthFullClear Indicates that the Bandwidth full alarm has been cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.26 |
| adTa5kSmBandwidthFull Indicates that the Bandwidth full alarm is active | notification | - | .1.3.6.1.4.1.664.1.750.0.27 |
| adTa5kSmPriTimingSrcClear deprecated Indicates that the primary timing source alarm has cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.28 |
| adTa5kSmPriTimingSrcFail deprecated Indicates that the primary timing source has failed | notification | - | .1.3.6.1.4.1.664.1.750.0.29 |
| adTa5kSmTimingSrcFail deprecated Indicates that the primary and/or secondary timing source has failed | notification | - | .1.3.6.1.4.1.664.1.750.0.3 |
| adTa5kSmSecTimingSrcClear deprecated Indicates that the secondary timing source alarm has cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.30 |
| adTa5kSmSecTimingSrcFail deprecated Indicates that the secondary timing source has failed | notification | - | .1.3.6.1.4.1.664.1.750.0.31 |
| adTa5kSmNodeNumberProvClear Indicates that the shelf's node number has been provisioned and is not zero. | notification | - | .1.3.6.1.4.1.664.1.750.0.32 |
| adTa5kSmNodeNumberDefault Indicates that the shelf's node number has not been provisioned. | notification | - | .1.3.6.1.4.1.664.1.750.0.33 |
| adTa5kSmMgmtVlanFailClear Indicates that the SM's failure to communicate the Internal Management VLAN to an access module has cleared. | notification | - | .1.3.6.1.4.1.664.1.750.0.34 |
| adTa5kSmMgmtVlanFail Indicates that the SM has failed to communicate the Internal Management VLAN to an access module. | notification | - | .1.3.6.1.4.1.664.1.750.0.35 |
| adTa5kSmioMismatchClear Indicates that either there is no hardware incompatibility among the SM cards
and SMIO Or ERPS/CSLAG is not provisioned. | notification | - | .1.3.6.1.4.1.664.1.750.0.36 |
| adTa5kSmioMismatch Indicates that attempts for provisioning of ERPS or CSLAG is made and hardware incompatibility detected
among SM and SMIO | notification | - | .1.3.6.1.4.1.664.1.750.0.37 |
| adTa5kSmBackPlaneRateFallback Indicates that the AM is in Backplane Rate Fallback mode.
adGenSlotInfoIndex indicates the slot of the card sending the alarm,
which is always the active SM.
ifIndex indicates the… | notification | - | .1.3.6.1.4.1.664.1.750.0.39 |
| adTa5kSmRingGenClear Indicates ring generator alarm clear | notification | - | .1.3.6.1.4.1.664.1.750.0.4 |
| adTa5kSmPeerLinkDownClear Indicates that the link status of the high speed peer interface between redundant switch modules is up.
ifIndex indicates the associated peer port interface | notification | - | .1.3.6.1.4.1.664.1.750.0.40 |
| adTa5kSmPeerLinkDown Indicates that the link status of the high speed peer interface between redundant switch modules is down.
ifIndex indicates the associated peer port interface | notification | - | .1.3.6.1.4.1.664.1.750.0.41 |
| adTa5kSmBackPlaneIncompatibleClear Indicates that the Backplane Incompatible alarm has been cleared. | notification | - | .1.3.6.1.4.1.664.1.750.0.42 |
| adTa5kSmBackPlaneIncompatibleActive Indicates that SM cards are not capable of full backplane speeds to some slots in the chassis. | notification | - | .1.3.6.1.4.1.664.1.750.0.43 |
| adTa5kSmRingGenFail Indicates that the ring generator has failed | notification | - | .1.3.6.1.4.1.664.1.750.0.5 |
| adTa5kSmPowerLimitAlmClear Indicates that the power limit alarm has cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.6 |
| adTa5kSmPowerLimitExceeded Indicates that the shelf power limit has been exceeded | notification | - | .1.3.6.1.4.1.664.1.750.0.7 |
| adTa5kSmUnknownSfpClear Indicates that the unknown SFP alarm has cleared | notification | - | .1.3.6.1.4.1.664.1.750.0.8 |
| adTa5kSmUnknownSfpAlarm Indicates that the unknown SFP alarm is active | notification | - | .1.3.6.1.4.1.664.1.750.0.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ADTRAN-GENTRAPINFORM-MIBadTrapInformSeqNum The sequence number included in the last trap originated by
this device. This can be used to confirm receipt of the
latest traps. Not needed by SNMPv2 Informs. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.16.1.2 |
| SNMPv2-MIBsysName An administratively-assigned name for this managed
node. By convention, this is the node's fully-qualified
domain name. If the name is unknown, the value is
the zero-length stri… | scalar | OctetString | .1.3.6.1.2.1.1.5 |
| ADTRAN-GENSLOT-MIBadGenSlotInfoIndex A unique value for each slot. Its value may exceed
the value of adGenSlotNumber if pseudo slot numbers
are used for some bank commons or multiplexers.
This object is visible for … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.13.2.3.1.1 |
| IF-MIBifIndex A unique value, greater than zero, for each interface. It
is recommended that values are assigned contiguously
starting from 1. The value for each interface sub-layer
must remai… | column | InterfaceIndex | .1.3.6.1.2.1.2.2.1.1 |
| ADTRAN-TAeSCUEXT1-MIBadTAeSCUTrapAlarmLevel Alarm Level of a trap. This value is invalid if read.
This will be used as a varbind in a trap to indicate
its alarm level. | scalar | Enumeration | .1.3.6.1.4.1.664.2.241.18.6 |