adTA5kPotsPulseDigitDetectionEnable

ADTRAN-TA5K-POTS-MIB · .1.3.6.1.4.1.664.2.753.1.2.1.1.18
MIB view Table view

Object

column r/w SNMPv2-TCTruthValue 
This entry is used to enable or disable the pulse dial digit detection for this port.
This entry only applies to fxs ports that are connected to a VoIP service, such as SIP or MGCP.
If set to true, then pulse dial digits will be detected from the loop and reported to the voice switch.
If set to false, then pulse dial digits will be ignored and will not be reported to the voice switch.
This object is true by default.

Context

MIB
ADTRAN-TA5K-POTS-MIB
OID
.1.3.6.1.4.1.664.2.753.1.2.1.1.18
Type
column
Access
readwrite
Status
current
Parent
adTA5kPotsPortProvEntry
Table
adTA5kPotsPortProvTable
Siblings
17

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
adTA5kPotsPortMode
POTS port operational Mode - 1 = Loopstart 2 = Groundstart 3 = TR08 Single Party 4 = TR08 UVG
columnEnumeration.1.3.6.1.4.1.664.2.753.1.2.1.1.1
adTA5kPotsPortImpedanceByLoopLength
POTS port 2-wire termination impedance by loop length- 1 = Other - The impedance matches one of the values defined by adTA5kPotsPortImpedance that can not be accurately represente…
columnEnumeration.1.3.6.1.4.1.664.2.753.1.2.1.1.10
adTA5kPotsPortOverTempAlarmEnable
Provisioning for Enable/Disable Over Temperature Alarm which is a port level alarm. 1 = Enable 2 = Disable
columnEnumeration.1.3.6.1.4.1.664.2.753.1.2.1.1.11
adTA5kPotsPortMwiType
Provisioning for the type of Message Waiting Indication for this port to use. 1 = Use Frequency Shift Keying (FSK) to indicate Message Waiting to the phone 2 = Use Neon Voltage to…
columnEnumeration.1.3.6.1.4.1.664.2.753.1.2.1.1.12
adTA5kPotsPortNeonMwiCadence
Provisioning for the flashing cadence of Neon Message Waiting Indication for this port. 1 = Flash the Neon lamp on or off every 1000ms 2 = Flash the Neon lamp on or off every 500m…
columnEnumeration.1.3.6.1.4.1.664.2.753.1.2.1.1.13
adTA5kPotsPortNeonMwiVoltage
Provisioning for the voltage of Neon Message Waiting Indication for this port. 1 = 85 volts 2 = 90 volts 3 = 100 volts 4 = 110 volts 5 = 120 volts 6 = 130 volts
columnEnumeration.1.3.6.1.4.1.664.2.753.1.2.1.1.14
adTA5kPotsPortVoiceCallJitterBufferDepth
Provisioning for the Jitter Buffer Depth used for Voice Calls in mS
columnInteger32.1.3.6.1.4.1.664.2.753.1.2.1.1.15
adTA5kPotsPortFaxModemCallJitterBufferDepth
Provisioning for the Jitter Buffer Depth used for Fax Modem Calls in mS
columnInteger32.1.3.6.1.4.1.664.2.753.1.2.1.1.16
adTA5kPotsPortCircuitIdentifier
The circuit identifier string for the fxs port.
columnOctetString.1.3.6.1.4.1.664.2.753.1.2.1.1.17
adTA5kPotsPortImpedance
POTS port 2-wire termination impedance - 1 = 600 Ohms 2,3 are no longer supported 4 = 900 Ohms + 2.16 uF 5 = z1 - 220 + (820 // 115nF) 6 = z2 - 270 + (750 // 150nF) 7 = z3 - 270 +…
columnEnumeration.1.3.6.1.4.1.664.2.753.1.2.1.1.2
adTA5kPotsPortTXTLPString
POTS Port Transmit TLP -9.0dB to +6.0dB
columnOctetString.1.3.6.1.4.1.664.2.753.1.2.1.1.3
adTA5kPotsPortRXTLPString
POTS Port Receive TLP -10.0dB to +6.0dB
columnOctetString.1.3.6.1.4.1.664.2.753.1.2.1.1.4
adTA5kPotsPortOnHookMsg
POTS Port On-Hook Messaging - 1 = Enable 2 = Disable
columnEnumeration.1.3.6.1.4.1.664.2.753.1.2.1.1.5
adTA5kPotsPortTrunkConditioningAlarm
Provisioning for Enable/Disable Trunk Conditioning Alarm which is a port level alarm. 1 = Enable 2 = Disable
columnEnumeration.1.3.6.1.4.1.664.2.753.1.2.1.1.6
adTA5kPotsPortLineShoweringAlarm
Provisioning for Enable/Disable Line Showering Alarm which is a port level alarm. 1 = Enable 2 = Disable
columnEnumeration.1.3.6.1.4.1.664.2.753.1.2.1.1.7
adTA5kPotsPortAutoImpedanceMode
POTS Automatic Impedance Mode - 1 = Manual 2 = Automatic
columnEnumeration.1.3.6.1.4.1.664.2.753.1.2.1.1.8
adTA5kPotsPortRingVoltage
POTS Ringer Voltage - 1 = 50 Vrms 2 = 60 Vrms 3 = 70 Vrms 4 = 80 Vrms 5 = 85 Vrms 6 = 90 Vrms
columnEnumeration.1.3.6.1.4.1.664.2.753.1.2.1.1.9