adTA5kPotsPortOnHookMsg

ADTRAN-TA5K-POTS-MIB · .1.3.6.1.4.1.664.2.753.1.2.1.1.5

MIB view Table view

Object

column r/w Enumeration

POTS Port On-Hook Messaging -
1 = Enable
2 = Disable

Context

MIB: ADTRAN-TA5K-POTS-MIB
OID: .1.3.6.1.4.1.664.2.753.1.2.1.1.5
Type: column
Access: readwrite
Status: current
Parent: adTA5kPotsPortProvEntry
Table: adTA5kPotsPortProvTable
Siblings: 17

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	enable
`2`	disable

Related Objects

Sibling Objects

Object	Type	Syntax	OID
adTA5kPotsPortMode POTS port operational Mode - 1 = Loopstart 2 = Groundstart 3 = TR08 Single Party 4 = TR08 UVG	column	Enumeration	`.1.3.6.1.4.1.664.2.753.1.2.1.1.1`
adTA5kPotsPortImpedanceByLoopLength POTS port 2-wire termination impedance by loop length- 1 = Other - The impedance matches one of the values defined by adTA5kPotsPortImpedance that can not be accurately represente…	column	Enumeration	`.1.3.6.1.4.1.664.2.753.1.2.1.1.10`
adTA5kPotsPortOverTempAlarmEnable Provisioning for Enable/Disable Over Temperature Alarm which is a port level alarm. 1 = Enable 2 = Disable	column	Enumeration	`.1.3.6.1.4.1.664.2.753.1.2.1.1.11`
adTA5kPotsPortMwiType Provisioning for the type of Message Waiting Indication for this port to use. 1 = Use Frequency Shift Keying (FSK) to indicate Message Waiting to the phone 2 = Use Neon Voltage to…	column	Enumeration	`.1.3.6.1.4.1.664.2.753.1.2.1.1.12`
adTA5kPotsPortNeonMwiCadence Provisioning for the flashing cadence of Neon Message Waiting Indication for this port. 1 = Flash the Neon lamp on or off every 1000ms 2 = Flash the Neon lamp on or off every 500m…	column	Enumeration	`.1.3.6.1.4.1.664.2.753.1.2.1.1.13`
adTA5kPotsPortNeonMwiVoltage Provisioning for the voltage of Neon Message Waiting Indication for this port. 1 = 85 volts 2 = 90 volts 3 = 100 volts 4 = 110 volts 5 = 120 volts 6 = 130 volts	column	Enumeration	`.1.3.6.1.4.1.664.2.753.1.2.1.1.14`
adTA5kPotsPortVoiceCallJitterBufferDepth Provisioning for the Jitter Buffer Depth used for Voice Calls in mS	column	Integer32	`.1.3.6.1.4.1.664.2.753.1.2.1.1.15`
adTA5kPotsPortFaxModemCallJitterBufferDepth Provisioning for the Jitter Buffer Depth used for Fax Modem Calls in mS	column	Integer32	`.1.3.6.1.4.1.664.2.753.1.2.1.1.16`
adTA5kPotsPortCircuitIdentifier The circuit identifier string for the fxs port.	column	OctetString	`.1.3.6.1.4.1.664.2.753.1.2.1.1.17`
adTA5kPotsPulseDigitDetectionEnable This entry is used to enable or disable the pulse dial digit detection for this port. This entry only applies to fxs ports that are connected to a VoIP service, such as SIP or MGC…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.664.2.753.1.2.1.1.18`
adTA5kPotsPortImpedance POTS port 2-wire termination impedance - 1 = 600 Ohms 2,3 are no longer supported 4 = 900 Ohms + 2.16 uF 5 = z1 - 220 + (820 // 115nF) 6 = z2 - 270 + (750 // 150nF) 7 = z3 - 270 +…	column	Enumeration	`.1.3.6.1.4.1.664.2.753.1.2.1.1.2`
adTA5kPotsPortTXTLPString POTS Port Transmit TLP -9.0dB to +6.0dB	column	OctetString	`.1.3.6.1.4.1.664.2.753.1.2.1.1.3`
adTA5kPotsPortRXTLPString POTS Port Receive TLP -10.0dB to +6.0dB	column	OctetString	`.1.3.6.1.4.1.664.2.753.1.2.1.1.4`
adTA5kPotsPortTrunkConditioningAlarm Provisioning for Enable/Disable Trunk Conditioning Alarm which is a port level alarm. 1 = Enable 2 = Disable	column	Enumeration	`.1.3.6.1.4.1.664.2.753.1.2.1.1.6`
adTA5kPotsPortLineShoweringAlarm Provisioning for Enable/Disable Line Showering Alarm which is a port level alarm. 1 = Enable 2 = Disable	column	Enumeration	`.1.3.6.1.4.1.664.2.753.1.2.1.1.7`
adTA5kPotsPortAutoImpedanceMode POTS Automatic Impedance Mode - 1 = Manual 2 = Automatic	column	Enumeration	`.1.3.6.1.4.1.664.2.753.1.2.1.1.8`
adTA5kPotsPortRingVoltage POTS Ringer Voltage - 1 = 50 Vrms 2 = 60 Vrms 3 = 70 Vrms 4 = 80 Vrms 5 = 85 Vrms 6 = 90 Vrms	column	Enumeration	`.1.3.6.1.4.1.664.2.753.1.2.1.1.9`