adTA5kPotsLineTestWarbleToneCadence
ADTRAN-TA5K-POTS-MIB ·
.1.3.6.1.4.1.664.2.753.3.2.1.1.8
Object
column
r/w
Enumeration
The amount of time in ms that one frequency in the warble tone is played before alternating to the the other frequency.
Context
- MIB
- ADTRAN-TA5K-POTS-MIB
- OID
.1.3.6.1.4.1.664.2.753.3.2.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- adTA5kPotsLineTestEntry
- Table
- adTA5kPotsLineTestTable
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | time100ms |
2 | time250ms |
3 | time500ms |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adTA5kPotsLineTest1004HzTone This item controls the generation of a 1004 Hz test tone
from the POTS interface.
1 = To Loop
2 = To Network
3 = Disable | column | Enumeration | .1.3.6.1.4.1.664.2.753.3.2.1.1.1 |
| adTA5kPotsPortForceMwiOnEvent A set command will force the Message Waiting Indicator for the port to turn ON.
Get has no meaning and will always return indicatorOn(1).
This provides a means for MWI events to b… | column | Enumeration | .1.3.6.1.4.1.664.2.753.3.2.1.1.10 |
| adTA5kPotsLineTestRingCadence This item enables/disables the ring cadence test on the POTS interface.
1 = Enable
2 = Disable | column | Enumeration | .1.3.6.1.4.1.664.2.753.3.2.1.1.2 |
| adTA5kPotsLineTestLoopState This item controls the loop state test on the POTS interface.
1 = Disable
2 = Active High
3 = Active Low
4 = Reverse Active High
5 = Reverse Active Low
6 = Power Down Active
7 = P… | column | Enumeration | .1.3.6.1.4.1.664.2.753.3.2.1.1.3 |
| adTA5kPotsLineClearTest This will clear all Port Line Tests. The get will always return 1.
1 = Clear | column | Enumeration | .1.3.6.1.4.1.664.2.753.3.2.1.1.4 |
| adTA5kPotsLineTestWarbleTone This will enable or disable a warble tone as defined by the oids
adTA5kPotsLineTestWarbleToneFreq1, adTA5kPotsLineTestWarbleToneFreq2,
and adTA5kPotsLineTestWarbleToneCadence. | column | Enumeration | .1.3.6.1.4.1.664.2.753.3.2.1.1.5 |
| adTA5kPotsLineTestWarbleToneFreq1 The first alternating frequency used in the warble tone. | column | Enumeration | .1.3.6.1.4.1.664.2.753.3.2.1.1.6 |
| adTA5kPotsLineTestWarbleToneFreq2 The second alternating frequency used in the warble tone. | column | Enumeration | .1.3.6.1.4.1.664.2.753.3.2.1.1.7 |
| adTA5kPotsPortForceMwiOffEvent A set command will force the Message Waiting Indicator for the port to turn OFF.
Get has no meaning and will always return indicatorOff(1).
This provides a means for MWI events to… | column | Enumeration | .1.3.6.1.4.1.664.2.753.3.2.1.1.9 |