adGenGr909IdleNoiseResult
ADTRAN-TA5K-GR909-MIB ·
.1.3.6.1.4.1.664.5.67.1.19.1.1.30
Object
column
Enumeration
The result of the noise measurement test on the line.
pass(1) = Idle Channel Noise Measurement passed.
fail(2) = Idle Channel Noise Measurement exceeded threshold.
na(3) = Idle Channel Measurement results are invalid, because
test has never been run, was not run in last test
sweep, or there was a fault during test execution.
Context
- MIB
- ADTRAN-TA5K-GR909-MIB
- OID
.1.3.6.1.4.1.664.5.67.1.19.1.1.30- Type
- column
- Access
- readonly
- Status
- current
- Parent
- adGenGr909Entry
- Table
- adGenGr909Table
- Siblings
- 36
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | pass |
2 | fail |
3 | na |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adGenGr909HPTResult This item indicates the result for the HPT test.
Pass(1) = The HPT test Passed.
Fail(2) = The HPT test failed.
N/A(3) = The HPT test result is not ready. | column | Enumeration | .1.3.6.1.4.1.664.5.67.1.19.1.1.1 |
| adGenGr909FVAcTipToGndResult The result for the Foreign Voltage AC
Tip to Ground test. | column | Enumeration | .1.3.6.1.4.1.664.5.67.1.19.1.1.10 |
| adGenGr909FVAcRingToGndResult The result for the Foreign Voltage AC
Ring to Ground test. | column | Enumeration | .1.3.6.1.4.1.664.5.67.1.19.1.1.11 |
| adGenGr909FVDcTipToGndResult The result for the Foreign Voltage DC
Tip to Ground test. | column | Enumeration | .1.3.6.1.4.1.664.5.67.1.19.1.1.12 |
| adGenGr909FVDcRingToGndResult The result for the Foreign Voltage DC
Ring to Ground test. | column | Enumeration | .1.3.6.1.4.1.664.5.67.1.19.1.1.13 |
| adGenGr909LoopImpTipToRingMeas The value for the Loop Impedance
Tip to Ring measurement. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.67.1.19.1.1.14 |
| adGenGr909LoopImpTipToGndMeas The value for the Loop Impedance
Tip to Ground measurement. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.67.1.19.1.1.15 |
| adGenGr909LoopImpRingToGndMeas The value for the Loop Impedance
Ring to Ground measurement. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.67.1.19.1.1.16 |
| adGenGr909LoopImpTipToRingResult The result for the Loop Impedance
Tip to Ring test. | column | Enumeration | .1.3.6.1.4.1.664.5.67.1.19.1.1.17 |
| adGenGr909LoopImpTipToGndResult The result for the Loop Impedance
Tip to Ground test. | column | Enumeration | .1.3.6.1.4.1.664.5.67.1.19.1.1.18 |
| adGenGr909LoopImpRingToGndResult The result for the Loop Impedance
Ring to Ground test. | column | Enumeration | .1.3.6.1.4.1.664.5.67.1.19.1.1.19 |
| adGenGr909FEMFResult This item indicates the result for the FEMF test.
Pass(1) = The FEMF test Passed.
Fail(2) = The FEMF test failed.
N/A(3) = The FEMF test result is not ready. | column | Enumeration | .1.3.6.1.4.1.664.5.67.1.19.1.1.2 |
| adGenGr909RingerMeas The value for the Ringer measurement. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.67.1.19.1.1.20 |
| adGenGr909LastTestComplete The last test time the GR909 test was completed. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.67.1.19.1.1.21 |
| adGenGr909LastTestAttempt The last test time the GR909 test was completed. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.67.1.19.1.1.22 |
| adGenGr909LastTestResult This item indicates the result for the last test.
N/A(1) = The last test result is not valid.
Complete(2) = The last test is Complete.
Fault(3) = The last test had a fault.
Runnin… | column | Enumeration | .1.3.6.1.4.1.664.5.67.1.19.1.1.23 |
| adGenGr909FailureCode The Failure Code for the last GR909 test. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.67.1.19.1.1.24 |
| adGenGr909BeginTest Begin running the GR909 test. | column | Enumeration | .1.3.6.1.4.1.664.5.67.1.19.1.1.25 |
| adGenGr909LoopCapTipToRingMeas The value for the Loop Capacitance
Tip to Ring measurement. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.67.1.19.1.1.26 |
| adGenGr909LoopCapTipToGndMeas The value for the Loop Capacitance
Tip to Ground measurement. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.67.1.19.1.1.27 |
| adGenGr909LoopCapRingToGndMeas The value for the Loop Capacitance
Ring to Ground measurement. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.67.1.19.1.1.28 |
| adGenGr909IdleNoiseMeasure Noise on the line. | column | -0.001 dBm Integer32 | .1.3.6.1.4.1.664.5.67.1.19.1.1.29 |
| adGenGr909RFaultResult This item indicates the result for the RFault test.
Pass(1) = The RFault test Passed.
Fail(2) = The RFault test failed.
N/A(3) = The RFault test result is not ready. | column | Enumeration | .1.3.6.1.4.1.664.5.67.1.19.1.1.3 |
| adGenGr909NumLoadCoils Number of load coils on the line. | column | Integer32 | .1.3.6.1.4.1.664.5.67.1.19.1.1.31 |
| adGenGr909LoadCoilsDistance Returns a vector of 32-bit unsigned integers (split into octets)
containing the measured distance to each detected load coil
in feet.
If no load coil is detected then the system … | column | OctetString | .1.3.6.1.4.1.664.5.67.1.19.1.1.32 |
| adGenGr909LoadCoilsResult This item indicates the result for the load coils test.
Valid(1) = The load coil test results are valid.
Invalid(2) = The load coil test results are invalid. | column | Enumeration | .1.3.6.1.4.1.664.5.67.1.19.1.1.33 |
| adGenGr909TestFlag Use to enable/disable the GR909 line tests. | column | Enumeration | .1.3.6.1.4.1.664.5.67.1.19.1.1.34 |
| adGenGr909TestCapFlag Use to enable/disable the capacitance test on the line. | column | Enumeration | .1.3.6.1.4.1.664.5.67.1.19.1.1.35 |
| adGenGr909TestNoiseFlag Use to enable/disable the noise test on the line. | column | Enumeration | .1.3.6.1.4.1.664.5.67.1.19.1.1.36 |
| adGenGr909TestLoadCoilFlag Use to enable/disable the load coil tests on the line. | column | Enumeration | .1.3.6.1.4.1.664.5.67.1.19.1.1.37 |
| adGenGr909RingerResult This item indicates the result for the Ringer test.
Pass(1) = The Ringer test Passed.
Fail(2) = The Ringer test failed.
N/A(3) = The Ringer test result is not ready. | column | Enumeration | .1.3.6.1.4.1.664.5.67.1.19.1.1.4 |
| adGenGr909ROHResult This item indicates the result for the ROH test.
Pass(1) = The ROH test Passed.
Fail(2) = The ROH test failed.
N/A(3) = The ROH test result is not ready. | column | Enumeration | .1.3.6.1.4.1.664.5.67.1.19.1.1.5 |
| adGenGr909FVAcTipToGndMeas The value for the Foreign Voltage AC
Tip to Ground measurement. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.67.1.19.1.1.6 |
| adGenGr909FVAcRingToGndMeas The value for the Foreign Voltage AC
Ring to Ground measurement. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.67.1.19.1.1.7 |
| adGenGr909FVDcTipToGndMeas The value for the Foreign Voltage DC
Tip to Ground measurement. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.67.1.19.1.1.8 |
| adGenGr909FVDcRingToGndMeas The value for the Foreign Voltage DC
Ring to Ground measurement. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.67.1.19.1.1.9 |