adGenAccessoryFaceplate

Object

column OctetString

A bit encoded string representing the status of faceplate
indicators, LEDs, buttons & switches for GUI visualization.
The first byte will be the number of LED/switches encoded.
The following bytes will contain 2 bit sequences in network order
for each LED or switch, from the top to the bottom of the faceplate.
The final byte may be padded with zeros.
The meaning of each pair of bits for LEDs is:
  00 - off
  01 - color A on only
  10 - color B on only (not used for mono-colors)
  11 - both A & B on (not used for mono-colors)
The meaning of each pair of bits for switches or buttons is:
  00 - not pressed if button
  01 - up or right switch position, or pressed if button
  10 - down or left switch position
  11 - middle switch position
The definition of colors and/or on/off switch values will be
defined in the product specific MIB.
This may be cached at the chassis level.

Context

MIB: ADTRAN-GENMAX-ACCESSORY-MIB
OID: .1.3.6.1.4.1.664.5.54.6.1.7
Type: column
Access: readonly
Status: current
Parent: adGenAccessoryEntry
Table: adGenAccessoryTable
Siblings: 13

Related Objects

Sibling Objects

Object	Type	Syntax	OID
adGenAccessoryIndex A unique value for each accessory. This object is visible for all rows.	column	Integer32	`.1.3.6.1.4.1.664.5.54.6.1.1`
adGenAccessoryProvVersion A counter starting at 0 which is incremented by the agent after each provisioning change so that an EMS can detect that a change has been made locally that needs further investiga…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.664.5.54.6.1.10`
adGenAccessoryTFileName Filename for tftp software update. A minimum of length of 25 characters must be supported. Server is defined in genchass.mib	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.664.5.54.6.1.13`
adGenAccessoryUpdateSoftware A set command will initiate tftp download. Get has no meaning and will always return 1.	column	Enumeration	`.1.3.6.1.4.1.664.5.54.6.1.15`
adGenAccessoryUpdateStatus A progress indication during download which can be polled.	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.664.5.54.6.1.16`
adGenAccessoryUpTime The time (in hundredths of a second) since the card was powered up. This is comparable to the mib-2.system.sysUpTime timer object for the IP addressable agent, but is unique for e…	column	SNMPv2-SMITimeTicks	`.1.3.6.1.4.1.664.5.54.6.1.17`
adGenAccessoryModuleIndex A unique value for each accessory module. This object is visible for all rows.	column	Integer32	`.1.3.6.1.4.1.664.5.54.6.1.2`
adGenAccessoryState The state of the card slot. Initially it is empty. When a card is inserted, it becomes occupied, and the Slot Type is determined by the card Product Code. When a card is removed, …	column	ADTRAN-TCAdPresence	`.1.3.6.1.4.1.664.5.54.6.1.3`
adGenAccessoryProduct The ADTRAN Product code. Agent will report real product code when installed or pre-provisioned. This object is visible for all rows. It is defined in the ADTRAN-TC.	column	ADTRAN-TCAdProductIdentifier	`.1.3.6.1.4.1.664.5.54.6.1.4`
adGenAccessoryTrapEnable Enables/Disables traps initiated from this slot. Note that cards out of service will not generate traps.	column	Enumeration	`.1.3.6.1.4.1.664.5.54.6.1.5`
adGenAccessoryAlarmStatus A bit encoded string representing the alarm state of the slot. The LSB should be 1 for No Alarm, else 0 and the higher order bits will indicate which alarms are present. The speci…	column	OctetString	`.1.3.6.1.4.1.664.5.54.6.1.6`
adGenAccessoryStatServiceState Module service state. Port service states are commanded via ifAdminStatus and reported via ifOperStatus in the IF-MIB. Those states of up, down, & testing correspond to the first …	column	Enumeration	`.1.3.6.1.4.1.664.5.54.6.1.8`
adGenAccessoryPortNumber The number of physical ports (regardless of their current state) present in this slot.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.664.5.54.6.1.9`

Object

Context

Syntax

Values & Constraints

Related Objects