adGenEasyPseudowireCEMPhyTimeslots
ADTRAN-GENERIC-PSEUDOWIRE-CEM-MGMT-MIB ·
.1.3.6.1.4.1.664.5.70.30.4.2.1.5
Object
column
r/w
OctetString
Bitmap of timeslots from DS1/E1 to be connected to the pseudowire channel. Three octets are used to represent the 24 timeslots of DS1 and four octets are used to represent the 32 timeslots of E1. Each octet within the value of this object specifies a set of eight timeslots, with the first octet specifying timeslots 1 through 8, the second octet specifying timeslots 9 through 16, etc. Within each octet, the least significant bit represents the lowest numbered timeslot and the most significant bit represents the highest numbered timeslot. Thus, each timeslot is represented by a single bit within the value of this object. Writing a '1' to a given bit location selects that timeslot and the timeslot is not included if its bit is set to '0'. For ex. setting this object to 00 00 FC 3F selects timeslots 1 through 6 and 11 through 16.
Context
- MIB
- ADTRAN-GENERIC-PSEUDOWIRE-CEM-MGMT-MIB
- OID
.1.3.6.1.4.1.664.5.70.30.4.2.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- adGenEasyPseudowireCEMTimeslotEntry
- Table
- adGenEasyPseudowireCEMTimeslotTable
- Siblings
- 8
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adGenEasyPseudowireCEMIndex This is an arbitrary index assigned by the adGenEasyPseudowireCEMNextIndex OID. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.70.30.4.2.1.1 |
| adGenEasyPseudowireCEMPweIfIndex This is the index of the pseudowire channel. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.664.5.70.30.4.2.1.2 |
| adGenEasyPseudowireCEMStartingPweTimeslot Starting Pseudowire timeslot. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.70.30.4.2.1.3 |
| adGenEasyPseudowireCEMPhysicalPortIfIndex The ifIndex of the physical DS1/E1 connected to the pseudowire channel. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.664.5.70.30.4.2.1.4 |
| adGenEasyPseudowireCEMAction Set this object to add/remove a row in the table. | column | Enumeration | .1.3.6.1.4.1.664.5.70.30.4.2.1.6 |
| adGenEasyPseudowireCEMErrorString Indicates the reason for the error if there was an error in provisioning. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.70.30.4.2.1.7 |
| adGenEasyPseudowireCEMStatusString This object indicates the status of the last attempted activation of this
row. It will indicate pass/fail/inProgress status. | column | Enumeration | .1.3.6.1.4.1.664.5.70.30.4.2.1.8 |
| adGenEasyPseudowireCEMRowStatus For this row to go active each parameter in this table must be set.
If an activate fails then the adGenEasyPseudowireCEMErrorString will be populated
with the failure reasons.. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.664.5.70.30.4.2.1.9 |