ADTRAN-GENERIC-PSEUDOWIRE-CEM-MGMT-MIB Table View

Total Access 5000 Pseudowire CEM Provisioning Table.

adGenPseudowireCEMProvTableEntry row .1.3.6.1.4.1.664.5.70.30.1.1.1

Channel ifIndex - see specific product

Indexes

IF-MIBifIndex

Column	Syntax	OID
adGenPseudowireCEMType The pseudowire circuit emulation mode assigned to the pseudowire channel. This object supports three enumerations. - `satop', Structure-Agnostic Time Division Multiplexing (TDM) …	Enumerationr/w Enumerated Values: 1 satop 2 cesopBasic 3 cesopCas	.1.3.6.1.4.1.664.5.70.30.1.1.1.1
adGenPseudowireCEMPhysicalPortIfIndex The ifIndex of the T1/E1 connected to this pseudowire channel, or 0 for no connection. This OID is applicable only in SAToP mode.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.664.5.70.30.1.1.1.2
adGenPseudowireCEMDestinationNode The remote node assigned to the pseudowire channel.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.30.1.1.1.3
adGenPseudowireCEMDestinationShelf The remote shelf assigned to the pseudowire channel.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.30.1.1.1.4
adGenPseudowireCEMDestinationSlot The remote slot ifIndex assigned to the pseudowire channel.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.664.5.70.30.1.1.1.5
adGenPseudowireCEMDestinationChannel The remote pseudowire channel ifIndex assigned to this pseudowire channel.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.664.5.70.30.1.1.1.6
adGenPseudowireCEMDestinationONTNumber The remote ONT number ifIndex assigned to this pseudowire channel. This object is only used when the remote is a GPON device otherwise it should be kept at 0.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.664.5.70.30.1.1.1.7
adGenPseudowireCEMDestinationONTSlot The remote ONT slot ifIndex assigned to this pseudowire channel. This object is only used when the remote is a GPON device otherwise it should be kept at 0.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.664.5.70.30.1.1.1.8
adGenPseudowireCEMDestinationONTPort The remote ONT port ifIndex assigned to this pseudowire channel. This object is only used when the remote is a GPON device otherwise it should be kept at 0.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.664.5.70.30.1.1.1.9
adGenPseudowireCEMRowStatus The object is used to manage the creation, activation and deletion of a conceptual row. This object only supports four of the six status columns defined by the SNMPv2-TC MIB. - `active',…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.664.5.70.30.1.1.1.10
adGenPseudowireCEMErrorStr The error string for SNMP query.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.30.1.1.1.11
adGenPseudowireCEMCircuitIdentifierStr The circuit identifier string for the pseudowire channel.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.30.1.1.1.12
adGenPseudowireCEMPktJitterBufferDepth The jitter buffer depth in milliseconds for the pseudowire channel.	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.664.5.70.30.1.1.1.13
adGenPseudowireCEMPktPayloadSize The payload packet size in bytes for the pseudowire channel.	Integer32r/w Constraints: range: 25-958	.1.3.6.1.4.1.664.5.70.30.1.1.1.14
adGenPseudowireCEMPktRTPPayloadType The RTP payload type for the pseudowire channel.	Integer32r/w Constraints: range: 96-127	.1.3.6.1.4.1.664.5.70.30.1.1.1.15
adGenPseudowireCEMPktRTPFrequency The RTP frequency in 8 kHz increments for the pseudowire channel.	Integer32r/w Constraints: range: 8-13200	.1.3.6.1.4.1.664.5.70.30.1.1.1.16
adGenPseudowireCEMDscp Differenciated services code point (DSCP) as defined by Iana. DSCP is a 6-bit field in the header of IP packets for packet classification purposes.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.664.5.70.30.1.1.1.17
adGenPseudowireCEMServiceState This entry gets/sets the service state of the selected pseudowire channel.	Enumerationr/w Enumerated Values: 1 inService 2 oosUnassigned 3 oosMaintenance	.1.3.6.1.4.1.664.5.70.30.1.1.1.18
adGenPseudowireCEMDetailedOperStatus The Detailed Operational Status of the pseudowire channel.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.664.5.70.30.1.1.1.19

Total Access 5000 Pseudowire CEM Advanced Provisioning Table.

adGenAdvancedPseudowireCEMProvTableEntry row .1.3.6.1.4.1.664.5.70.30.2.1.1

Channel ifIndex - see specific product

Indexes

IF-MIBifIndex

Column	Syntax	OID
adGenAdvancedPseudowireCEMType The pseudowire type assigned to the pseudowire channel. This object supports three enumerations. - `satop', Structure-Agnostic Time Division Multiplexing (TDM) over Packet, R…	Enumerationr/w Enumerated Values: 1 satop 2 cesopBasic 3 cesopCas	.1.3.6.1.4.1.664.5.70.30.2.1.1.1
adGenAdvancedPseudowireCEMSourceUDP The source UDP assigned to the pseudowire channel. The integer value of the source UDP for this object is 49152 through 65535.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.30.2.1.1.2
adGenAdvancedPseudowireCEMPhysicalPortIfIndex The ifIndex of the T1/E1 connected to this pseudowire channel, or 0 for no connection. This OID is applicable only in SAToP mode.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.664.5.70.30.2.1.1.3
adGenAdvancedPseudowireCEMDestinationUDP The destination UDP assigned to the pseudowire channel. The integer value of the destination UDP for this object is 49152 through 65535.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.30.2.1.1.4
adGenAdvancedPseudowireCEMDestinationIP The destination IP address assigned to the pseudowire channel.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.664.5.70.30.2.1.1.5
adGenAdvancedPseudowireCEMDestinationMac The MAC address of the destination pseudowire interface.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.664.5.70.30.2.1.1.6
adGenAdvancedPseudowireCEMRowStatus The object is used to manage the creation, activation and deletion of a conceptual row. This object only supports four of the six status columns defined by the SNMPv2-TC MIB. - `active',…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.664.5.70.30.2.1.1.7
adGenAdvancedPseudowireCEMErrorStr The error string for SNMP query.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.30.2.1.1.8
adGenAdvancedPseudowireCEMCircuitIdentifierStr The circuit identifier string for the pseudowire channel.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.30.2.1.1.9
adGenAdvancedPseudowireCEMPktJitterBufferDepth The jitter buffer depth in milliseconds for the pseudowire channel.	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.664.5.70.30.2.1.1.10
adGenAdvancedPseudowireCEMPktPayloadSize The payload packet length in bytes for the pseudowire channel.	Integer32r/w Constraints: range: 25-958	.1.3.6.1.4.1.664.5.70.30.2.1.1.11
adGenAdvancedPseudowireCEMPktRTPPayloadType The RTP payload type for the pseudowire channel.	Integer32r/w Constraints: range: 96-127	.1.3.6.1.4.1.664.5.70.30.2.1.1.12
adGenAdvancedPseudowireCEMPktRTPFrequency The RTP frequency in 8 kHZ increments for the pseudowire channel.	Integer32r/w Constraints: range: 8-13200	.1.3.6.1.4.1.664.5.70.30.2.1.1.13
adGenAdvancedPseudowireCEMDscp Differenciated services code point (DSCP) as defined by Iana. DSCP is a 6-bit field in the header of IP packets for packet classification purposes.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.664.5.70.30.2.1.1.14
adGenAdvancedPseudowireCEMServiceState This entry gets/sets the service state of the selected pseudowire channel.	Enumerationr/w Enumerated Values: 1 inService 2 oosUnassigned 3 oosMaintenance	.1.3.6.1.4.1.664.5.70.30.2.1.1.15
adGenAdvancedPseudowireCEMDetailedOperStatus The Detailed Operational Status of the pseudowire channel.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.664.5.70.30.2.1.1.16

Pseudowire CEM CESoP Mode Timeslot Assignment Table.

adGenPseudowireCEMCesopTimeslotTableEntry row .1.3.6.1.4.1.664.5.70.30.3.1.1

An entry in the cesop mode timeslot assignment table

Indexes

adGenPseudowireCEMCesopPweIfIndex adGenPseudowireCEMCesopPweTimeslot adGenPseudowireCEMCesopPhysicalPortIfIndex adGenPseudowireCEMCesopPhyTimeslot

Column	Syntax	OID
adGenPseudowireCEMCesopPweIfIndex The pseudowire ifIndex.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.664.5.70.30.3.1.1.1
adGenPseudowireCEMCesopPweTimeslot The pseudowire timeslots.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.30.3.1.1.2
adGenPseudowireCEMCesopPhysicalPortIfIndex The ifIndex of the physical DS1/E1 connected to the pseudowire channel.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.664.5.70.30.3.1.1.3
adGenPseudowireCEMCesopPhyTimeslot The timeslots of the physical DS1/E1 connected to the pseudowire channel.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.30.3.1.1.4
adGenPseudowireCEMCesopConnectionStatus The connection status.	Enumeration Enumerated Values: 1 connected	.1.3.6.1.4.1.664.5.70.30.3.1.1.5

This table is used for getting the next available index to the
Easy Pseudowire CEM Table.

adGenEasyPseudowireCEMGetNextEntry row .1.3.6.1.4.1.664.5.70.30.4.1.1

An entry in the Pseudowire CEM GetNext Table

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex

Column	Syntax	OID
adGenEasyPseudowireCEMNextIndex Returns the next available Easy CEM index number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.30.4.1.1.1

This table is used to setup timeslots. Activation of a row in this
table creates row(s) in the adGenPseudowireCEMCesopTimeslotTable.

adGenEasyPseudowireCEMTimeslotEntry row .1.3.6.1.4.1.664.5.70.30.4.2.1

An entry in the Pseudowire CEM Timeslot Table. This table is indexed
by the values returned from the adGenEasyPseudowireCEMNextIndex OID.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenEasyPseudowireCEMIndex

Column	Syntax	OID
adGenEasyPseudowireCEMIndex This is an arbitrary index assigned by the adGenEasyPseudowireCEMNextIndex OID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.30.4.2.1.1
adGenEasyPseudowireCEMPweIfIndex This is the index of the pseudowire channel.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.664.5.70.30.4.2.1.2
adGenEasyPseudowireCEMStartingPweTimeslot Starting Pseudowire timeslot.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.30.4.2.1.3
adGenEasyPseudowireCEMPhysicalPortIfIndex The ifIndex of the physical DS1/E1 connected to the pseudowire channel.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.664.5.70.30.4.2.1.4
adGenEasyPseudowireCEMPhyTimeslots Bitmap of timeslots from DS1/E1 to be connected to the pseudowire channel. Three octets are used to represent the 24 timeslots of DS1 and four octets are used to represent the 32 timeslots of E1. Each octet within the v…	OctetStringr/w	.1.3.6.1.4.1.664.5.70.30.4.2.1.5
adGenEasyPseudowireCEMAction Set this object to add/remove a row in the table.	Enumerationr/w Enumerated Values: 1 add 2 remove	.1.3.6.1.4.1.664.5.70.30.4.2.1.6
adGenEasyPseudowireCEMErrorString Indicates the reason for the error if there was an error in provisioning.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.30.4.2.1.7
adGenEasyPseudowireCEMStatusString This object indicates the status of the last attempted activation of this row. It will indicate pass/fail/inProgress status.	Enumeration Enumerated Values: 1 pass 2 fail 3 inProgress	.1.3.6.1.4.1.664.5.70.30.4.2.1.8
adGenEasyPseudowireCEMRowStatus For this row to go active each parameter in this table must be set. If an activate fails then the adGenEasyPseudowireCEMErrorString will be populated with the failure reasons..	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.664.5.70.30.4.2.1.9