adGenFrGroupLmiType

ADTRAN-GEN-FRAME-RELAY-MIB · .1.3.6.1.4.1.664.5.70.29.1.1.2.1.5
MIB view Table view

Object

column r/w Enumeration 
The value of this object identifies the local in-channel signaling
protocol that is used for this frame relay UNI/NNI logical port.

Context

MIB
ADTRAN-GEN-FRAME-RELAY-MIB
OID
.1.3.6.1.4.1.664.5.70.29.1.1.2.1.5
Type
column
Access
readwrite
Status
current
Parent
adGenFrGroupEntry
Table
adGenFrGroupTable
Siblings
15

Syntax

Enumeration

Values & Constraints

Enumerated Values
1none
3ansi617d1994

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
adGenFrGroupRowStatus
The adGenFrGroupRowStatus object allows create, change, and delete operations on the Frame Relay Group / Bearer Channel.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.664.5.70.29.1.1.2.1.1
adGenFrGroupLmiStatusOut
The number of Status messages transmitted. If the logical port is not performing network-side or bidirectional procedures then this object is not applicable.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.664.5.70.29.1.1.2.1.10
adGenFrGroupLmiInvalidIn
The number of invalid LMI messages received by this logical port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.664.5.70.29.1.1.2.1.11
adGenFrGroupLmiStatusEnqTimeouts
The number of times this logical port has failed to receive a Status Enquiry message in T392 seconds. If the logical port is not performing network-side or bidirectional procedur…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.664.5.70.29.1.1.2.1.12
adGenFrGroupLmiStatusTimeouts
The number of times this logical port has failed to receive a Status message in a polling interval (within T391 seconds). If the logical port is not performing user-side or bidir…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.664.5.70.29.1.1.2.1.13
adGenFrGroupClearCounters
Writing a value of 1 will reset the interface and signaling statistics for this logical port.
columnEnumeration.1.3.6.1.4.1.664.5.70.29.1.1.2.1.14
adGenFrGroupClearPmHistory
Writing a value of 1 will reset the interface performance monitoring statistics/intervals for this logical port.
columnEnumeration.1.3.6.1.4.1.664.5.70.29.1.1.2.1.15
adGenFrGroupLinkLastCreateError
The reason for the last error that occurred while attempting to create an entry in the Frame Relay Link Table (adGenFrLinkTable) for this specific frame relay group.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.664.5.70.29.1.1.2.1.16
adGenFrGroupPvcLastCreateError
The reason for the last error that occurred while attempting to create an entry in the Frame Relay PVC Table (adGenFrPVCTable) for this specific frame relay group.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.664.5.70.29.1.1.2.1.17
adGenFrGroupStatusString
The reason, if any, why the why the group is not in an operational state due to provisioning or hardware limitations.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.664.5.70.29.1.1.2.1.2
adGenFrGroupAdminStatus
The desired state of the frame relay group. This object must be set to up(1) or testing(3) to enable user data transmission on PVCs of this group and for enabling of any signalin…
columnEnumeration.1.3.6.1.4.1.664.5.70.29.1.1.2.1.3
adGenFrGroupLmiStatus
The value of this object identifies status of local in-channel signaling protocol. If the signaling protocol is 'none', then this object will report 'up'.
columnEnumeration.1.3.6.1.4.1.664.5.70.29.1.1.2.1.6
adGenFrGroupLmiEnquiryIn
The number of Status Enquiry messages received. If the logical port is not performing network-side or bidirectional procedures then this object is not applicable.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.664.5.70.29.1.1.2.1.7
adGenFrGroupLmiEnquiryOut
The number of Status Enquiry messages transmitted. If the logical port is not performing user-side or bidirectional procedures then this object is not applicable.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.664.5.70.29.1.1.2.1.8
adGenFrGroupLmiStatusIn
The number of Status messages received. If the logical port is not performing user-side or bidirectional procedures then this object is not applicable.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.664.5.70.29.1.1.2.1.9