adVqmCfgUdpEnable
ADTRAN-AOS-VQM ·
.1.3.6.1.4.1.664.5.53.5.3.2.3
Object
scalar
Enumeration
VQM uses UDP packet inspection to monitor for RTP traffic.
Context
- MIB
- ADTRAN-AOS-VQM
- OID
.1.3.6.1.4.1.664.5.53.5.3.2.3- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- adVQMCfg
- Siblings
- 22
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adVqmCfgEnable VQM feature global enable/disable. | scalar | Enumeration | .1.3.6.1.4.1.664.5.53.5.3.2.1 |
| adVqmCfgJitterBufferFixedSize Number packets fixed jitter buffer can hold (10-500 pkts). | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.53.5.3.2.10 |
| adVqmCfgJitterBufferThresholdEarlyMs Jitter buffer threshold for early arriving packets. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.53.5.3.2.11 |
| adVqmCfgJitterBufferThresholdLateMs Jitter buffer threshold for late arriving packets. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.53.5.3.2.12 |
| adVqmCfgRoundTripPingEnabled Ping use for measuring round-trip delay between
end-points. | scalar | Enumeration | .1.3.6.1.4.1.664.5.53.5.3.2.13 |
| adVqmCfgRoundTripPingType ICMP Ping or ICMP Timestamp used for delay measurements. | scalar | Enumeration | .1.3.6.1.4.1.664.5.53.5.3.2.14 |
| adVqmCfgCallHistorySize Size of Call History buffer. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.53.5.3.2.15 |
| adVqmCfgHistoryThresholdLqmos Store history statistics if below LQ MOS threshold value. | scalar | MOSvalue | .1.3.6.1.4.1.664.5.53.5.3.2.16 |
| adVqmCfgHistoryThresholdCqmos Store history statistics if below CQ MOS threshold value. | scalar | MOSvalue | .1.3.6.1.4.1.664.5.53.5.3.2.17 |
| adVqmCfgHistoryThresholdPqmos Store history statistics if below PESQ MOS threshold
value. | scalar | MOSvalue | .1.3.6.1.4.1.664.5.53.5.3.2.18 |
| adVqmCfgHistoryThresholdLoss Store history statistics if loss packets are greater than
threshold value. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.53.5.3.2.19 |
| adVqmCfgSipEnable VQM uses SIP signaling to monitor for RTP traffic. | scalar | Enumeration | .1.3.6.1.4.1.664.5.53.5.3.2.2 |
| adVqmCfgHistoryThresholdOutOfOrder Store history statistics if Out of Order packets are greater
than threshold value. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.53.5.3.2.20 |
| adVqmCfgHistoryThresholdJitter Store history statistics if Jitter exceeds threshold value. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.53.5.3.2.21 |
| adVqmCfgClear Clear all VQM statistics.
This is a write-only variable. A read will result in no action
being taken. | scalar | Enumeration | .1.3.6.1.4.1.664.5.53.5.3.2.22 |
| adVqmCfgClearCallHistory Clear only call history buffer.
This is a write-only variable. A read will result in no action
being taken. | scalar | Enumeration | .1.3.6.1.4.1.664.5.53.5.3.2.23 |
| adVqmCfgInternationalCode Regional scoring adjustment for VQM calculations. | scalar | Enumeration | .1.3.6.1.4.1.664.5.53.5.3.2.4 |
| adVqmCfgJitterBufferType Regional scoring adjustment for VQM calculations. | scalar | Enumeration | .1.3.6.1.4.1.664.5.53.5.3.2.5 |
| adVqmCfgJitterBufferAdaptiveMin Minimum adaptive jitter buffer delay (10-240 ms). | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.53.5.3.2.6 |
| adVqmCfgJitterBufferAdaptiveNominal Adaptive starting delay applied to packets (10-240 ms). | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.53.5.3.2.7 |
| adVqmCfgJitterBufferAdaptiveMax Adaptive maximum jitter buffer delay (40-320 ms). | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.53.5.3.2.8 |
| adVqmCfgJitterBufferFixedNominal Fixed jitter buffer constant delay applied to packets
(4-250 ms). | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.53.5.3.2.9 |