adVQMCfg

ADTRAN-AOS-VQM · .1.3.6.1.4.1.664.5.53.5.3.2
MIB view Table view

Object

node

No description available.

Context

MIB
ADTRAN-AOS-VQM
OID
.1.3.6.1.4.1.664.5.53.5.3.2
Type
node
Parent
adVQM
Siblings
8
Children
23

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
adVQMTrapnode-.1.3.6.1.4.1.664.5.53.5.3.0
adVQMTrapControlnode-.1.3.6.1.4.1.664.5.53.5.3.1
adVQMThresholdnode-.1.3.6.1.4.1.664.5.53.5.3.3
adVQMSysPerfnode-.1.3.6.1.4.1.664.5.53.5.3.4
adVQMInterfacenode-.1.3.6.1.4.1.664.5.53.5.3.5
adVQMEndPointnode-.1.3.6.1.4.1.664.5.53.5.3.6
adVQMHistorynode-.1.3.6.1.4.1.664.5.53.5.3.7
adVQMActivenode-.1.3.6.1.4.1.664.5.53.5.3.8
Child Objects
ObjectTypeSyntaxOID
adVqmCfgEnable
VQM feature global enable/disable.
scalarEnumeration.1.3.6.1.4.1.664.5.53.5.3.2.1
adVqmCfgJitterBufferFixedSize
Number packets fixed jitter buffer can hold (10-500 pkts).
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.664.5.53.5.3.2.10
adVqmCfgJitterBufferThresholdEarlyMs
Jitter buffer threshold for early arriving packets.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.664.5.53.5.3.2.11
adVqmCfgJitterBufferThresholdLateMs
Jitter buffer threshold for late arriving packets.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.664.5.53.5.3.2.12
adVqmCfgRoundTripPingEnabled
Ping use for measuring round-trip delay between end-points.
scalarEnumeration.1.3.6.1.4.1.664.5.53.5.3.2.13
adVqmCfgRoundTripPingType
ICMP Ping or ICMP Timestamp used for delay measurements.
scalarEnumeration.1.3.6.1.4.1.664.5.53.5.3.2.14
adVqmCfgCallHistorySize
Size of Call History buffer.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.664.5.53.5.3.2.15
adVqmCfgHistoryThresholdLqmos
Store history statistics if below LQ MOS threshold value.
scalarMOSvalue.1.3.6.1.4.1.664.5.53.5.3.2.16
adVqmCfgHistoryThresholdCqmos
Store history statistics if below CQ MOS threshold value.
scalarMOSvalue.1.3.6.1.4.1.664.5.53.5.3.2.17
adVqmCfgHistoryThresholdPqmos
Store history statistics if below PESQ MOS threshold value.
scalarMOSvalue.1.3.6.1.4.1.664.5.53.5.3.2.18
adVqmCfgHistoryThresholdLoss
Store history statistics if loss packets are greater than threshold value.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.664.5.53.5.3.2.19
adVqmCfgSipEnable
VQM uses SIP signaling to monitor for RTP traffic.
scalarEnumeration.1.3.6.1.4.1.664.5.53.5.3.2.2
adVqmCfgHistoryThresholdOutOfOrder
Store history statistics if Out of Order packets are greater than threshold value.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.664.5.53.5.3.2.20
adVqmCfgHistoryThresholdJitter
Store history statistics if Jitter exceeds threshold value.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.664.5.53.5.3.2.21
adVqmCfgClear
Clear all VQM statistics. This is a write-only variable. A read will result in no action being taken.
scalarEnumeration.1.3.6.1.4.1.664.5.53.5.3.2.22
adVqmCfgClearCallHistory
Clear only call history buffer. This is a write-only variable. A read will result in no action being taken.
scalarEnumeration.1.3.6.1.4.1.664.5.53.5.3.2.23
adVqmCfgUdpEnable
VQM uses UDP packet inspection to monitor for RTP traffic.
scalarEnumeration.1.3.6.1.4.1.664.5.53.5.3.2.3
adVqmCfgInternationalCode
Regional scoring adjustment for VQM calculations.
scalarEnumeration.1.3.6.1.4.1.664.5.53.5.3.2.4
adVqmCfgJitterBufferType
Regional scoring adjustment for VQM calculations.
scalarEnumeration.1.3.6.1.4.1.664.5.53.5.3.2.5
adVqmCfgJitterBufferAdaptiveMin
Minimum adaptive jitter buffer delay (10-240 ms).
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.664.5.53.5.3.2.6
adVqmCfgJitterBufferAdaptiveNominal
Adaptive starting delay applied to packets (10-240 ms).
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.664.5.53.5.3.2.7
adVqmCfgJitterBufferAdaptiveMax
Adaptive maximum jitter buffer delay (40-320 ms).
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.664.5.53.5.3.2.8
adVqmCfgJitterBufferFixedNominal
Fixed jitter buffer constant delay applied to packets (4-250 ms).
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.664.5.53.5.3.2.9