adsl2LineStatusAttainableRateDs

ADSL2-LINE-MIB · .1.3.6.1.2.1.10.238.1.1.1.1.20

Object

column bits/second SNMPv2-SMIUnsigned32

Maximum Attainable Data Rate Downstream.
The maximum downstream net data rate currently attainable by
the ATU-C transmitter and the ATU-R receiver, coded in
bits/second.

Context

MIB: ADSL2-LINE-MIB
OID: .1.3.6.1.2.1.10.238.1.1.1.1.20
Type: column
Access: readonly
Status: current
Units: bits/second
Parent: adsl2LineEntry
Table: adsl2LineTable
Siblings: 24

Syntax

bits/second SNMPv2-SMIUnsigned32

Source: SNMPv2-SMIUnsigned32
Base type: Unsigned32

Values & Constraints

Type Constraints

range: 0..4294967295

Related Objects

Sibling Objects

Object	Type	Syntax	OID
adsl2LineCnfgTemplate The value of this object identifies the row in the ADSL2 Line Configuration Templates Table, (adsl2LineConfTemplateTable), which applies for this ADSL2 line. This o…	column	OctetString	`.1.3.6.1.2.1.10.238.1.1.1.1.1`
adsl2LineStatusLastStateDs The last successful transmitted initialization state in the downstream direction in the last full initialization performed on the line.	column	ADSL2-LINE-TC-MIBAdsl2LastTransmittedState	`.1.3.6.1.2.1.10.238.1.1.1.1.10`
adsl2LineStatusLastStateUs The last successful transmitted initialization state in the upstream direction in the last full initialization performed on the line.	column	ADSL2-LINE-TC-MIBAdsl2LastTransmittedState	`.1.3.6.1.2.1.10.238.1.1.1.1.11`
adsl2LineStatusAtur Indicates current state (existing failures) of the ATU-R. This is a bit-map of possible conditions.	column	ADSL2-LINE-TC-MIBAdsl2LineStatus	`.1.3.6.1.2.1.10.238.1.1.1.1.12`
adsl2LineStatusAtuc Indicates current state (existing failures) of the ATU-C. This is a bit-map of possible conditions.	column	ADSL2-LINE-TC-MIBAdsl2LineStatus	`.1.3.6.1.2.1.10.238.1.1.1.1.13`
adsl2LineStatusLnAttenDs The measured difference in the total power transmitted by the ATU-C and the total power received by the ATU-R over all sub- carriers during diagnostics mode and initialization. I…	column	0.1 dB Unsigned32	`.1.3.6.1.2.1.10.238.1.1.1.1.14`
adsl2LineStatusLnAttenUs The measured difference in the total power transmitted by the ATU-R and the total power received by the ATU-C over all sub- carriers during diagnostics mode and initialization. It…	column	0.1 dB Unsigned32	`.1.3.6.1.2.1.10.238.1.1.1.1.15`
adsl2LineStatusSigAttenDs The measured difference in the total power transmitted by the ATU-C and the total power received by the ATU-R over all sub- carriers during Showtime. It ranges from 0 to 1270 uni…	column	0.1 dB Unsigned32	`.1.3.6.1.2.1.10.238.1.1.1.1.16`
adsl2LineStatusSigAttenUs The measured difference in the total power transmitted by the ATU-R and the total power received by the ATU-C over all sub- carriers during Showtime. It ranges from 0 to 1270 uni…	column	0.1 dB Unsigned32	`.1.3.6.1.2.1.10.238.1.1.1.1.17`
adsl2LineStatusSnrMarginDs Downstream SNR Margin is the maximum increase in dB of the noise power received at the ATU-R, such that the BER requirements are met for all downstream bearer channels. It ranges…	column	0.1 dB Integer32	`.1.3.6.1.2.1.10.238.1.1.1.1.18`
adsl2LineStatusSnrMarginUs Upstream SNR Margin is the maximum increase in dB of the noise power received at the ATU-C, such that the BER requirements are met for all downstream bearer channels. It ranges f…	column	0.1 dB Integer32	`.1.3.6.1.2.1.10.238.1.1.1.1.19`
adsl2LineAlarmCnfgTemplate The value of this object identifies the row in the ADSL2 Line Alarm Configuration Template Table, (adsl2LineAlarmConfTemplateTable), which applies to this ADSL2 line. …	column	OctetString	`.1.3.6.1.2.1.10.238.1.1.1.1.2`
adsl2LineStatusAttainableRateUs Maximum Attainable Data Rate Upstream. The maximum upstream net data rate currently attainable by the ATU-R transmitter and the ATU-C receiver, coded in bits/second.	column	bits/second SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.10.238.1.1.1.1.21`
adsl2LineStatusActPsdDs Actual Power Spectrum Density (PSD) Downstream. The average downstream transmit PSD over the sub-carriers used for downstream. It ranges from -900 to 0 units of 0.1 dB (physical…	column	0.1 dB Integer32	`.1.3.6.1.2.1.10.238.1.1.1.1.22`
adsl2LineStatusActPsdUs Actual Power Spectrum Density (PSD) Upstream. The average upstream transmit PSD over the sub-carriers used for upstream. It ranges from -900 to 0 units of 0.1 dB (physical values…	column	0.1 dB Integer32	`.1.3.6.1.2.1.10.238.1.1.1.1.23`
adsl2LineStatusActAtpDs Actual Aggregate Transmit Power Downstream. The total amount of transmit power delivered by the ATU-C at the U-C reference point, at the instant of measurement. It ranges from -…	column	0.1 dB Integer32	`.1.3.6.1.2.1.10.238.1.1.1.1.24`
adsl2LineStatusActAtpUs Actual Aggregate Transmit Power Upstream. The total amount of transmit power delivered by the ATU-R at the U-R reference point, at the instant of measurement. It ranges …	column	0.1 dB Integer32	`.1.3.6.1.2.1.10.238.1.1.1.1.25`
adsl2LineCmndConfPmsf Power management state forced. Defines the line states to be forced by the near-end ATU on this line. The various possible values are: l3toL0(0), l0toL2(2), or l0orL2to…	column	ADSL2-LINE-TC-MIBAdsl2ConfPmsForce	`.1.3.6.1.2.1.10.238.1.1.1.1.3`
adsl2LineCmndConfLdsf Loop diagnostics mode forced (LDSF). Defines whether the line should be forced into the loop diagnostics mode by the near-end ATU on this line or only be responsive to loop diagn…	column	ADSL2-LINE-TC-MIBAdsl2LineLdsf	`.1.3.6.1.2.1.10.238.1.1.1.1.4`
adsl2LineCmndConfLdsfFailReason The status of the recent occasion the Loop diagnostics mode forced (LDSF) was issued for the associated line. Possible values are: none(1) - The default value in case …	column	ADSL2-LINE-TC-MIBAdsl2LdsfResult	`.1.3.6.1.2.1.10.238.1.1.1.1.5`
adsl2LineCmndAutomodeColdStart Automode cold start forced. This parameter is defined in order to improve testing of the performance of ATUs supporting automode when it is enabled in the MIB. Change the value o…	column	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.10.238.1.1.1.1.6`
adsl2LineStatusAtuTransSys The ATU Transmission System (ATS) in use. It is coded in a bit-map representation with only a single bit set to '1' (the selected coding for the ADSL line). This parameter may be…	column	ADSL2-LINE-TC-MIBAdsl2TransmissionModeType	`.1.3.6.1.2.1.10.238.1.1.1.1.7`
adsl2LineStatusPwrMngState The current power management state. One of four possible power management states: L0 - Synchronized and full transmission (i.e., Showtime). L1 - Low Power with reduced net …	column	ADSL2-LINE-TC-MIBAdsl2PowerMngState	`.1.3.6.1.2.1.10.238.1.1.1.1.8`
adsl2LineStatusInitResult Indicates the result of the last full initialization performed on the line. It is an enumeration type with the following values: noFail(0), configError(1), configNotFeasible(2), …	column	ADSL2-LINE-TC-MIBAdsl2InitResult	`.1.3.6.1.2.1.10.238.1.1.1.1.9`