atmNtePlugAndPlayActivity

ACE202-MIB · .1.3.6.1.4.1.164.12.3.1.1.17
MIB view Table view

Object

scalar r/w Enumeration 
Activity control for Manager Plug And Play.
disable - disable the feature.
offline - Automatic learn IP address into offline memory.
online  - Automatic learn IP address into online memory.

Context

MIB
ACE202-MIB
OID
.1.3.6.1.4.1.164.12.3.1.1.17
Type
scalar
Access
readwrite
Status
current
Parent
atmNteSysConfig
Siblings
24

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
atmNteManagerTable
The Manager Table includes all the NMSs that receive traps from this agent. A single manager can receive traps on more than one PVC. The PVCs must be from the four allowed. The a…
table-.1.3.6.1.4.1.164.12.3.1.1.1
atmNteConfCACnode-.1.3.6.1.4.1.164.12.3.1.1.10
atmNteHostIfTable
Host IP interface table.
table-.1.3.6.1.4.1.164.12.3.1.1.11
atmNteShaperMode
Shaper Mode. vpInbandMng - Vcc within a Vp for management.
scalarEnumeration.1.3.6.1.4.1.164.12.3.1.1.12
atmNteOutputRate
Aggregate shaping output rate in Cells per Seconds units. Default value is the Network port rate.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.164.12.3.1.1.13
atmNteTosMode
TOS Mode.
scalarEnumeration.1.3.6.1.4.1.164.12.3.1.1.14
atmNteTosMask
This parameter determines the seqence of bits that will be used for TOS. This parameter is applicable only if atmNteTosMode = enable. Valid only for IP-TOS process.
scalarOctetString.1.3.6.1.4.1.164.12.3.1.1.15
atmNteTosHighPriority
Priorities options are High or Low. High priority will be represented by bit = 1. Low priority will be represented by bit = 0. Each TOS value will be represented by the bit locat…
scalarOctetString.1.3.6.1.4.1.164.12.3.1.1.16
atmNteSlotUsage
Applicable to ace2002. Slot 2 might be configured as user slot or as network slot.
scalarEnumeration.1.3.6.1.4.1.164.12.3.1.1.18
atmNteConnectionsMaxNumber
The MAX number of connections supported by system. Setting this parameter will affect the number of MAX intervals supported. This parameter will affect the system only after reset…
scalarEnumeration.1.3.6.1.4.1.164.12.3.1.1.19
atmNteUPLTCR
The Unacceptable ES Limit threshold for Performance Management.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.164.12.3.1.1.2
atmNteDefaultVpi
Default Vpi for management.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.164.12.3.1.1.20
atmNteDefaultVci
Default Vci for management.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.164.12.3.1.1.21
atmNteReservedVpi
Internal use VPI, where shaperMode=vpInbandMng.
scalarInteger32.1.3.6.1.4.1.164.12.3.1.1.22
atmNteRdnManagement
The redundancy management status.
scalarEnumeration.1.3.6.1.4.1.164.12.3.1.1.23
atmNtePlugAndPlayIfIndex
The ifIndex of the Plug and Play VCC.
scalarIF-MIBInterfaceIndex.1.3.6.1.4.1.164.12.3.1.1.24
atmNteLoopbackTimeout
The Loopback state timeout in minutes. A value of zero means no timeout (for ever). Default is 5 min.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.164.12.3.1.1.25
atmNteOamTable
This table is a static table, which is created by agent once upon initialization. The created entries are actually, only the supported OAM features. This table enables addition o…
table-.1.3.6.1.4.1.164.12.3.1.1.26
atmNteDPLTCR
The Degraded ES Limit threshold for Performance Management.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.164.12.3.1.1.3
atmNteSysLogClearAll
Setting the variable to clear(3) removes all entries in the Log Buffer of the agent. The agent will immediately reset the variable to off(2).
scalarEnumeration.1.3.6.1.4.1.164.12.3.1.1.4
atmNteUSESLTCR
The Unacceptable SES Limit threshold for Performance Management.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.164.12.3.1.1.5
atmNteDSESLTCR
The Degraded ES Limit threshold for Performance Management.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.164.12.3.1.1.6
atmNteProtectionnode-.1.3.6.1.4.1.164.12.3.1.1.8
atmNteConfOamnode-.1.3.6.1.4.1.164.12.3.1.1.9