fileTransfer
ACE2002-MIB ·
.1.3.6.1.4.1.164.6.2.12
Object
node
No description available.
Context
- MIB
- ACE2002-MIB
- OID
.1.3.6.1.4.1.164.6.2.12- Type
- node
- Parent
- agnt
- Siblings
- 37
- Children
- 12
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agnHwVersion ASCII string for description and display of the agent hardware version,
as it is known by the agent software.The user can update the version
upon request when he changes compon… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.6.2.1 |
| agnLed This entry specifies the LEDs status of the agent module . Each led will be represented by 4
bits where the first 2 bits (left) will specify the status :
(00=NA, 01=OFF, 10=ON… | scalar | OctetString | .1.3.6.1.4.1.164.6.2.10 |
| trapTable This table includes the last few traps generated by the agent, for future retrieval. The table
has a limited capacity. If traps are not retrieved in proper time, they will be
over… | table | - | .1.3.6.1.4.1.164.6.2.11 |
| systemReset Reset action to be performed on the system. | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.13 |
| systemTiming | node | - | .1.3.6.1.4.1.164.6.2.14 |
| systemPort | node | - | .1.3.6.1.4.1.164.6.2.15 |
| systemResetAllStatsCmd Reset statistics of all ports and connections of the device. | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.16 |
| systemClearTablesCmd tempCnfgTables - Set *RowStatus = destroy for all entries of
some tables having *RowStatus object, for
temporary configuration only! (255).
For the relevant tables, see product'… | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.17 |
| systemParameter This parameter can be used for different purposes:
- TELNET session time-out in seconds.
- Ace20: when trying to create row in a table that already
has row with the sam… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.6.2.18 |
| agnGlobalAlarmMask The value of this attribute determines the alarm traps the
agent should mask and not send to the managers.
Each bit from a certain octet represents a certain alarm. | scalar | OctetString | .1.3.6.1.4.1.164.6.2.19 |
| agnTrapMask The value of this attribute determines the type of traps the
agent should mask and not send to the management console. The
value is differently determined for different products… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.6.2.2 |
| alarmSeverity This object specifies the severity of the alarms. | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.20 |
| alarmState . | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.21 |
| agnTestStatus Indicates the current test status (for all levels: system,
card, port).
This attribute will be set to:
on(3): when there is at least one test in progress on the
system/card/p… | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.22 |
| systemSaveAndResetAllStatsCmd on - a command to Save data of Current Period in Last Period
data-set and start a new counting period for Current Period.
off - agent will automatically change to this value, aft… | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.23 |
| systemDefaultGateway Default Gateway's IP Address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.164.6.2.24 |
| systemPsTable This table describes the PS types of a device.
Usage of this table is specified in the device's NMS SRS | table | - | .1.3.6.1.4.1.164.6.2.25 |
| agnFans This entry specifies the FANs existence and status.
Each fan will be represented by 2 bits,
where the first bit (right) will specify the existence:
(0= Not exist, 1=exist),
and t… | scalar | OctetString | .1.3.6.1.4.1.164.6.2.26 |
| agnSendTrapParameter This object specifies if the agent will attach a specific
parameter to a trap.
For ACE2002 the agent will attach or not the openViewSeverity
parameter according to the… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.6.2.27 |
| agnSensorsStatus This entry specifies the Sensors (Temperature sensors or others)
existence and status.
Each sensor will be represented by 2 bits,
where the first bit (right) will specify the exi… | scalar | OctetString | .1.3.6.1.4.1.164.6.2.28 |
| agnStationClockCard This entry specifies the station clock card
existence and status.
notExist - station clock card (piggy) does not exist.
notValid - station clock card exists but clock status is n… | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.29 |
| agnTrapValue deprecated The value of the trap decoded in internal RAD format. Full description is given
in the Trap definition file | scalar | OctetString | .1.3.6.1.4.1.164.6.2.3 |
| xcIndexNext This object contains an appropriate value to
be used for xcIndex when creating
entries in the xcTable. The value
0 indicates that no unassigned entries are
available. To obtain t… | scalar | Integer32 | .1.3.6.1.4.1.164.6.2.30 |
| xcTable Configuration of system cross-connect entries.
The table follows the behavior described in RFC 2515,
RFC 1604 regarding the creation deletion and modification
of an entry within… | table | - | .1.3.6.1.4.1.164.6.2.31 |
| systemModule | node | - | .1.3.6.1.4.1.164.6.2.32 |
| agnNearFarConnection This parameter describes the connection between near-end and far-end agents. | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.33 |
| agnAccess | node | - | .1.3.6.1.4.1.164.6.2.34 |
| systemInterface | node | - | .1.3.6.1.4.1.164.6.2.35 |
| systemOam | node | - | .1.3.6.1.4.1.164.6.2.36 |
| bitMappingTable This table maps bits of an octet string to an interface.
For ACE-2002 this table is used to map bits of VLAN port lists
to LAN VCC's. This table is the opposite view of the xcTabl… | table | - | .1.3.6.1.4.1.164.6.2.38 |
| bitMappingView A view of the bitMappingTable in one object - each entry in the
biMappingTable will have the corresponding Bit of this object
(bitMappingLocation) = '1'.
For ACE-2002 it is used… | scalar | OctetString | .1.3.6.1.4.1.164.6.2.39 |
| agnChangeCnt The number of changes in system configuration that were reported to the
manager since last cold start | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.6.2.4 |
| agnSpecific Object identifier of entity containing additional information
regarding this instance. | scalar | ObjectIdentifier | .1.3.6.1.4.1.164.6.2.5 |
| agnConfigMsg Full configuration message coded in internal RAD application format.
This entry describes agent's configuration.
For MP-2200 R3, this object describes agent's support … | scalar | OctetString | .1.3.6.1.4.1.164.6.2.6 |
| mngTrapIpTable This table indicates the destination address of the traps.
Internally it will be limited to ten addresses. | table | - | .1.3.6.1.4.1.164.6.2.7 |
| agnIndication Attribute describing the state of the entity the agent is responsible for.
In case of a modular entity, the value of this attribute will be according
to the component which is in … | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.8 |
| agnMonitorModeCmd Setting this attribute to ON, will enforce the agent to change its mode of operation to
Monitor Mode | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fileServerIP The IP address of the server from which the file is loaded | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.164.6.2.12.1 |
| intSwdlTable This parameters table is for
internal Software down load. It also includes data
about all files contained in the Object from which
down-load is performed. | table | - | .1.3.6.1.4.1.164.6.2.12.10 |
| swdlStatusTable This parameters table is for software download status.
It also includes data about the files down-loaded or
attempted to be down-loaded. | table | - | .1.3.6.1.4.1.164.6.2.12.11 |
| clearDwldStatusLog This object clears the status log.
Value: off(2), external(3), internal(4)
The Agent will change the value of this MIB object to off(2)
automatically, after accepting the command… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.6.2.12.12 |
| fileName The name of the file to be loaded. For protection, read returns
NULL. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.6.2.12.2 |
| fileTransCmd The command to be executed on fileName at fileServerIP. | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.12.3 |
| tftpRetryTimeOut General Retransmission time-out value (seconds) | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.6.2.12.4 |
| tftpTotalTimeOut Total Retransmission time-out value (seconds) | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.6.2.12.5 |
| tftpStatus Status of tftp session. When a session ended with success,
the tftpStatus should be endedOk(6). Before restarting a
tftp session, the NMS should set the tftpStatus to noOp(2).
Tha… | scalar | Enumeration | .1.3.6.1.4.1.164.6.2.12.6 |
| tftpError The MSB represents the standard error code.
The LSB represents the private error code.
0x0000 is No Error
0x0100 is File Not Found
0x0400 is Illegal TFTP operation
0x0500 is Unkno… | scalar | OctetString | .1.3.6.1.4.1.164.6.2.12.7 |
| fileTransferToSubSystems This object represents the sub-systems the fileTransCmd
refers to. It should be used when a system is divided
to sub-systems and each sub-system (or part of them) can
have a… | scalar | OctetString | .1.3.6.1.4.1.164.6.2.12.8 |
| fileNameWithinProduct The file name used by the product within the product file system. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.164.6.2.12.9 |