atmNteEventType

ACE2002-MIB · .1.3.6.1.4.1.164.12.3.1.2.9

Object

scalar Enumeration

This parameter identifies the event.
On  - the problem exist.
Off - the problem not exist.
InvalidLogin - Invalid login on local console.
CorrectLogin - Successful login operation.

Context

MIB: ACE2002-MIB
OID: .1.3.6.1.4.1.164.12.3.1.2.9
Type: scalar
Access: readonly
Status: current
Parent: atmNteSysInfo
Siblings: 15

Syntax

Enumeration

Values & Constraints

Enumerated Values

`3`	ps1NotActive
`4`	ps1Active
`5`	ps2NotActive
`6`	ps2Active
`7`	heatAlarmOff
`8`	heatAlarmOn
`9`	inputAlarm1Off
`10`	inputAlarm1On
`11`	inputAlarm2Off
`12`	inputAlarm2On
`13`	inputAlarm3Off
`14`	inputAlarm3On
`15`	inputAlarm4Off
`16`	inputAlarm4On
`17`	fan1Ok
`18`	fan1Fail
`19`	fan2Ok
`20`	fan2Fail
`21`	invalidLogin
`22`	validLogin
`23`	powerFailure
`24`	writeToFlashFailure

Related Objects

Sibling Objects

Object	Type	Syntax	OID
atmNteIdTable The IDs of the cards and of the system.	table	-	`.1.3.6.1.4.1.164.12.3.1.2.1`
atmNteIntervalMaxNumber The MAX number of connections intervals supported by system. This parameter value is a function of atmNteConnectionsMaxNumber parameter. This parameter should affect the threshol…	scalar	Integer32	`.1.3.6.1.4.1.164.12.3.1.2.10`
atmNteAlarmType This object specifies the type of the alarm.	scalar	Enumeration	`.1.3.6.1.4.1.164.12.3.1.2.11`
atmNteLevel This object specifies the ATM level.	scalar	Enumeration	`.1.3.6.1.4.1.164.12.3.1.2.12`
atmNteConnectionsNumber This object specifies a quantity of connections.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.1.2.13`
atmNteTotalLb This parameter counts the total number of end-points that were configured with Loopback (LB).	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.1.2.14`
atmNteTotalCc This parameter counts the total number of end-points that were configured with Continuity Check (CC).	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.1.2.15`
atmNteTotalPm This parameter counts the total number of end-points that were configured with PM.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.1.2.16`
atmSysPSunits The number of power supply units.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.1.2.2`
atmSysPSunitsInUse The main power supply in this unit.	scalar	Enumeration	`.1.3.6.1.4.1.164.12.3.1.2.3`
atmSysFanUnits The number of fan units.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.1.2.4`
atmSysNetPrts The number of network ports.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.1.2.5`
atmSysNetPrtInUse The network port in use.	scalar	Enumeration	`.1.3.6.1.4.1.164.12.3.1.2.6`
atmNteBridgingMode Bridging mode can be one of the following: ATM <> Ethernet - Bridging is between the Ethernet port and the ATM port (there is no bridging between VCs). ATM <> Ethernet + ATM - B…	scalar	Enumeration	`.1.3.6.1.4.1.164.12.3.1.2.7`
atmSysStats	node	-	`.1.3.6.1.4.1.164.12.3.1.2.8`