a3ipxSapCtl
A3Com-IPX-r5-MIB ·
.1.3.6.1.4.1.43.2.7.2.1.14
Object
column
mandatory
r/w
Enumeration
No description available.
Context
- MIB
- A3Com-IPX-r5-MIB
- OID
.1.3.6.1.4.1.43.2.7.2.1.14- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- a3ipxRipControlEntry
- Table
- a3ipxRipControlTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | talkListen |
2 | talkNoListen |
3 | noTalkListen |
4 | noTalkNoListen |
5 | auto |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| a3ipxRipControlPort mandatory The IPX port to which this entry applies. | column | Integer32 | .1.3.6.1.4.1.43.2.7.2.1.1 |
| a3ipxRipControlListen obsolete This object determines if IPX RIP updates are accepted
over this port. If this object is enabled(1), then the
IPX router listens to the incoming RIP updates.
If this object is s… | column | Enumeration | .1.3.6.1.4.1.43.2.7.2.1.10 |
| a3ipxSapControlTalk obsolete This object controls the transmission of IPX SAP
updates on this port. If enabled, IPX SAP updates
are sent. If disabled, they are not sent. | column | Enumeration | .1.3.6.1.4.1.43.2.7.2.1.11 |
| a3ipxSapControlListen obsolete This object determines if IPX SAP updates are accepted
over this port. If this object is enabled(1), then the
IPX router listens to the incoming SAP updates.
If this object is s… | column | Enumeration | .1.3.6.1.4.1.43.2.7.2.1.12 |
| a3ipxRipCtl mandatory | column | Enumeration | .1.3.6.1.4.1.43.2.7.2.1.13 |
| a3ipxRipControlSwitch obsolete If this object is set to enabled(1), IPX RIP exchanges
RIP information with its neighbors and maintains the
routing table dynamically. If this object is set to
disabled(2), dyna… | column | Enumeration | .1.3.6.1.4.1.43.2.7.2.1.2 |
| a3ipxRipControlTrigger mandatory If this object is set to enabled(1), triggered
responses are sent when the network topology changes,
allowing the network to calculate potentially better
routes. If this object i… | column | Enumeration | .1.3.6.1.4.1.43.2.7.2.1.3 |
| a3ipxRipControlPoison mandatory If this object is set to enabled(1), Split Horizon with
Poison Reverse is performed. If this object is set to
disabled(2), the router omits routes learned from one
neighbor in re… | column | Enumeration | .1.3.6.1.4.1.43.2.7.2.1.4 |
| a3ipxRipControlMapOpt mandatory X.25 addresses and Frame Relay DLCIs can be mapped in
two different ways: by using IPX network numbers
as previously implemented (OldNbrMap) or by using the
Ethernet address of th… | column | Enumeration | .1.3.6.1.4.1.43.2.7.2.1.5 |
| a3ipxRipControlWanOpt obsolete This object is used to enable or disable the IPX WAN
feature on a specific port. IPX WAN is the protocol
Novell IPX uses to exchange necessary router to
router information prior… | column | Enumeration | .1.3.6.1.4.1.43.2.7.2.1.6 |
| a3ipxRipControlPerRip mandatory This object is used to specify how this router
generates IPX RIP updates. If this object is set
to periodicRip(1), the router will generate RIP
updates periodically. If this obj… | column | Enumeration | .1.3.6.1.4.1.43.2.7.2.1.7 |
| a3ipxRipControlPerSap mandatory This object is used to specify how this router
generates IPX SAP updates. If this object is set
to periodicSap(1), the router will generate SAP
updates periodically. If this obj… | column | Enumeration | .1.3.6.1.4.1.43.2.7.2.1.8 |
| a3ipxRipControlTalk obsolete This object controls the transmission of IPX RIP
updates on this port. If enabled, IPX RIP updates
are sent. If disabled, they are not sent. | column | Enumeration | .1.3.6.1.4.1.43.2.7.2.1.9 |