a3ComBrgPortTable

A3Com-Bridge-r3-MIB · .1.3.6.1.4.1.43.2.9.1.12

MIB view Table view

Object

table mandatory

This table is an extension of the dot1dBasePortTable
from the Bridge MIB defined in RFC1286.  This table
contains generic information and control facilities
for every port that is associated with the bridge.
Transparent, source-route, and srt ports are included.

Context

MIB: A3Com-Bridge-r3-MIB
OID: .1.3.6.1.4.1.43.2.9.1.12
Type: table
Status: mandatory
Parent: a3ComBrgGen
Siblings: 12
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
a3ComBrgCtl mandatory This object determines whether bridging is performed by this system. If this is set to noBridging (2), all functions associated with bridging are disabled, including Spanning Tre…	scalar	Enumeration	`.1.3.6.1.4.1.43.2.9.1.1`
a3ComBrgStExtTable mandatory This table is an extension of the dot1dStaticTable from the Bridge MIB, rfc1286. One additional column has been defined to identify the proper wide area address when bridging ov…	table	-	`.1.3.6.1.4.1.43.2.9.1.10`
a3ComBrgFdbExtTable mandatory This table is an extension of the dot1dTpFdbTable from the Bridge MIB, rfc1286. One additional column has been defined to identify the proper wide area address when bridging ove…	table	-	`.1.3.6.1.4.1.43.2.9.1.11`
a3ComBrgX25NbrTable mandatory This table specifies the DTE address of each X25 neighbor that supports transparent bridging. The bridge will forward to the neighbors defined in this table all broadcast packets…	table	-	`.1.3.6.1.4.1.43.2.9.1.13`
a3ComBrgAgeCtl mandatory This object determines whether nodes that have not transmitted packets for a specified amount of time are deleted from the forwarding table. If this object is set to aging (1), e…	scalar	Enumeration	`.1.3.6.1.4.1.43.2.9.1.2`
a3ComBrgFwallCtl mandatory This object is important when the system is performing both bridging and routing. When this is set to firewall (1), the bridge discards unicast packets of a protocol that is bein…	scalar	Enumeration	`.1.3.6.1.4.1.43.2.9.1.3`
a3ComBrgLearnCtl mandatory This object determines whether the bridge creates and updates entries in its forwarding tables.	scalar	Enumeration	`.1.3.6.1.4.1.43.2.9.1.4`
a3ComBrgForwardCtl mandatory This object determines whether the bridge forwards packets. This has no effect on other bridging related functions, such as Spanning Tree, Learning, and Source Routing. Setting…	scalar	Enumeration	`.1.3.6.1.4.1.43.2.9.1.5`
a3ComBrgAppleCtl mandatory This object enables the bridge to forward AppleTalk packets between Ethernet, FDDI, and token ring networks. The AppleTalk packets require encapsulation over FDDI networks. If Ap…	scalar	Enumeration	`.1.3.6.1.4.1.43.2.9.1.6`
a3ComBrgFwTblCtl mandatory This object is used to trigger actions taken on the static forwarding table. When this object is set to dynToStatic (2), all dynamically learned entries in the forwarding table a…	scalar	Enumeration	`.1.3.6.1.4.1.43.2.9.1.7`
a3ComBrgFwTblSize mandatory This object returns the size of the bridge forwarding table in units of 2^(9+n) where n is the value of this object. Thus, if this object has the value 2, then the bridge forwar…	scalar	Integer32	`.1.3.6.1.4.1.43.2.9.1.8`
a3ComBrgBLimitTimer mandatory This object is used to select the broadcast limit feature sample interval. That is, this object contains the value of the time interval over which the number of broadcast packet…	scalar	Enumeration	`.1.3.6.1.4.1.43.2.9.1.9`

Child Objects