a3ComBrgCtl
A3Com-Bridge-r3-MIB ·
.1.3.6.1.4.1.43.2.9.1.1
Object
scalar
mandatory
r/w
Enumeration
This object determines whether bridging is performed by this system. If this is set to noBridging (2), all functions associated with bridging are disabled, including Spanning Tree, Learning, and Source Routing.
Context
- MIB
- A3Com-Bridge-r3-MIB
- OID
.1.3.6.1.4.1.43.2.9.1.1- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- a3ComBrgGen
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | bridging |
2 | noBridging |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| a3ComBrgStExtTable mandatory This table is an extension of the dot1dStaticTable
from the Bridge MIB, rfc1286. One additional
column has been defined to identify the proper wide
area address when bridging ov… | table | - | .1.3.6.1.4.1.43.2.9.1.10 |
| a3ComBrgFdbExtTable mandatory This table is an extension of the dot1dTpFdbTable
from the Bridge MIB, rfc1286. One additional
column has been defined to identify the proper wide
area address when bridging ove… | table | - | .1.3.6.1.4.1.43.2.9.1.11 |
| a3ComBrgPortTable mandatory This table is an extension of the dot1dBasePortTable
from the Bridge MIB defined in RFC1286. This table
contains generic information and control facilities
for every port that is… | table | - | .1.3.6.1.4.1.43.2.9.1.12 |
| a3ComBrgX25NbrTable mandatory This table specifies the DTE address of each
X25 neighbor that supports transparent bridging.
The bridge will forward to the neighbors defined in
this table all broadcast packets… | table | - | .1.3.6.1.4.1.43.2.9.1.13 |
| a3ComBrgAgeCtl mandatory This object determines whether nodes that have not
transmitted packets for a specified amount of time
are deleted from the forwarding table. If this
object is set to aging (1), e… | scalar | Enumeration | .1.3.6.1.4.1.43.2.9.1.2 |
| a3ComBrgFwallCtl mandatory This object is important when the system is performing
both bridging and routing. When this is set to
firewall (1), the bridge discards unicast packets
of a protocol that is bein… | scalar | Enumeration | .1.3.6.1.4.1.43.2.9.1.3 |
| a3ComBrgLearnCtl mandatory This object determines whether the bridge creates
and updates entries in its forwarding tables. | scalar | Enumeration | .1.3.6.1.4.1.43.2.9.1.4 |
| a3ComBrgForwardCtl mandatory This object determines whether the bridge forwards
packets. This has no effect on other bridging
related functions, such as Spanning Tree, Learning,
and Source Routing. Setting… | scalar | Enumeration | .1.3.6.1.4.1.43.2.9.1.5 |
| a3ComBrgAppleCtl mandatory This object enables the bridge to forward
AppleTalk packets between Ethernet, FDDI, and
token ring networks. The AppleTalk packets
require encapsulation over FDDI networks.
If Ap… | scalar | Enumeration | .1.3.6.1.4.1.43.2.9.1.6 |
| a3ComBrgFwTblCtl mandatory This object is used to trigger actions taken on the
static forwarding table. When this object is set to
dynToStatic (2), all dynamically learned entries
in the forwarding table a… | scalar | Enumeration | .1.3.6.1.4.1.43.2.9.1.7 |
| a3ComBrgFwTblSize mandatory This object returns the size of the bridge
forwarding table in units of 2^(9+n) where
n is the value of this object. Thus, if this
object has the value 2, then the bridge
forwar… | scalar | Integer32 | .1.3.6.1.4.1.43.2.9.1.8 |
| a3ComBrgBLimitTimer mandatory This object is used to select the broadcast limit
feature sample interval. That is, this object
contains the value of the time interval over which
the number of broadcast packet… | scalar | Enumeration | .1.3.6.1.4.1.43.2.9.1.9 |