prConStackVLANConfigMode

Object

scalar mandatory r/w Enumeration

This object specifies the VLAN mode to be used. Setting it to
          
portMode(2) requires the user to configure each port's VLAN
          
membership individually,  whereas autoSelect(3) causes it to
          
acquire its membership from the VLAN Server. The value of this
          
object defines the setting that those ports will use which have
          
prConPortVLANConfigMode set to useDefault(2).
          
          
          
VLAN mode can be set for the whole stack or for individual
          
ports.  When a unit is initialised to factory defaults,
          
prconPortVLANConfigMode for every port is set to useDefault(2),
          
and the actual setting for the port is decided by the value of
          
this object.  The manager has the choice, therefore, of varying
          
the mode for every port in the stack, or for individual ports
          
only.

Context

MIB: A3COM0420-SWITCH-EXTENSIONS
OID: .1.3.6.1.4.1.43.10.34.1.3
Type: scalar
Access: readwrite
Status: mandatory
Parent: stackConfigGroup
Siblings: 12

Related Objects

Sibling Objects

Object	Type	Syntax	OID
prConStackFwdingMode mandatory This object controls whether cut-thru is enabled on the stack. Enabling cut-through can help to minimise the delay experienced by packets before they are for…	scalar	Enumeration	`.1.3.6.1.4.1.43.10.34.1.1`
prConStackPktRateControl mandatory This object controls whether the packet rate control feature is enabled or disabled. Products which do not support this feature will return notApplicable(1)…	scalar	Enumeration	`.1.3.6.1.4.1.43.10.34.1.10`
prConStackPktRateLimit mandatory This object specifies the maximum rate at which the selected types of packet may be received from a port before excess packets are discarded. The limit is s…	scalar	Integer32	`.1.3.6.1.4.1.43.10.34.1.11`
prConStackStpProtocolVersion mandatory The version of the Spanning Tree Protocol that is to be used by this Bridge. stpVersion0(0) The original version of Spanning Tree, …	scalar	Enumeration	`.1.3.6.1.4.1.43.10.34.1.12`
prConStackStpPathCostDefault mandatory The version of the Spanning Tree default Path Costs that are to be used by this Bridge. stp8021d1998(1) Path Costs from IEEE Std. 802.1D-1998. …	scalar	Enumeration	`.1.3.6.1.4.1.43.10.34.1.13`
prConStackLacpOperInfo mandatory This object shall contain a value indicating that LACP is operational, or not operational. If not operational, all units need to be upgraded to the latest …	scalar	Enumeration	`.1.3.6.1.4.1.43.10.34.1.14`
prConStackPaceMode mandatory This object specifies the type of backoff algorithm used on the units in the stack. Any suitable port can use the standard ethernet algorithm or, for PACE ap…	scalar	Enumeration	`.1.3.6.1.4.1.43.10.34.1.2`
prConStackRAPStudyPort mandatory This determines the ifIndex of the port a user wishes to monitor on the copy port. Monitoring causes all data from the study port to be copied to the copy p…	scalar	Integer32	`.1.3.6.1.4.1.43.10.34.1.4`
prConStackRAPCopyPort mandatory This is the value of ifIndex specifying the port to which data will be copied (mirrored), and must be set to a valid value, along with the study port, before…	scalar	Integer32	`.1.3.6.1.4.1.43.10.34.1.5`
prConStackRAPEnable mandatory This object controls the Roving Analysis Port (RAP) feature in conjunction with prConStackRAPStudyPort and prConStackRAPCopyPort. The RAP feature allows all…	scalar	Enumeration	`.1.3.6.1.4.1.43.10.34.1.6`
prConStackBridgeMode mandatory The value of this object determines whether the switch is to operate as a single bridge or as a bridge per VLAN (the default). In multiple bridge mode the s…	scalar	Enumeration	`.1.3.6.1.4.1.43.10.34.1.7`
prConStackIpTos mandatory This object is used to enable the classification of packets based upon the value of their IPToS field. When enabled, the packet's Traffic Classification will…	scalar	Enumeration	`.1.3.6.1.4.1.43.10.34.1.9`

`1`	notApplicable
`2`	portMode
`3`	autoSelect

Object

Context

Syntax

Values & Constraints

Related Objects