prConStackPktRateLimit
A3COM0420-SWITCH-EXTENSIONS ·
.1.3.6.1.4.1.43.10.34.1.11
Object
scalar
mandatory
r/w
Integer32
This object specifies the maximum rate at which the selected
types of packet may be received from a port before excess
packets are discarded. The limit is specified in packets per
second. To assist in calculating a suitable limit, note that
the absolute maximum transmission rates of packets on an
ethernet network is
10Mbps: 14880
and 100Mbps: 148800
Context
- MIB
- A3COM0420-SWITCH-EXTENSIONS
- OID
.1.3.6.1.4.1.43.10.34.1.11- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- stackConfigGroup
- Siblings
- 12
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-262143
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prConStackFwdingMode mandatory This object controls whether cut-thru is enabled on the stack.
Enabling cut-through can help to minimise the delay experienced
by packets before they are for… | scalar | Enumeration | .1.3.6.1.4.1.43.10.34.1.1 |
| prConStackPktRateControl mandatory This object controls whether the packet rate control feature is
enabled or disabled. Products which do not support this feature
will return notApplicable(1)… | scalar | Enumeration | .1.3.6.1.4.1.43.10.34.1.10 |
| prConStackStpProtocolVersion mandatory The version of the Spanning Tree Protocol that is to be used by
this Bridge.
stpVersion0(0) The original version of Spanning Tree,
… | scalar | Enumeration | .1.3.6.1.4.1.43.10.34.1.12 |
| prConStackStpPathCostDefault mandatory The version of the Spanning Tree default Path Costs that are to
be used by this Bridge.
stp8021d1998(1) Path Costs from IEEE Std. 802.1D-1998.
… | scalar | Enumeration | .1.3.6.1.4.1.43.10.34.1.13 |
| prConStackLacpOperInfo mandatory This object shall contain a value indicating that LACP is
operational, or not operational. If not operational, all units
need to be upgraded to the latest … | scalar | Enumeration | .1.3.6.1.4.1.43.10.34.1.14 |
| prConStackPaceMode mandatory This object specifies the type of backoff algorithm used on the
units in the stack. Any suitable port can use the standard
ethernet algorithm or, for PACE ap… | scalar | Enumeration | .1.3.6.1.4.1.43.10.34.1.2 |
| prConStackVLANConfigMode mandatory This object specifies the VLAN mode to be used. Setting it to
portMode(2) requires the user to configure each port's VLAN
membership individually, whereas a… | scalar | Enumeration | .1.3.6.1.4.1.43.10.34.1.3 |
| prConStackRAPStudyPort mandatory This determines the ifIndex of the port a user wishes to
monitor on the copy port. Monitoring causes all data from the
study port to be copied to the copy p… | scalar | Integer32 | .1.3.6.1.4.1.43.10.34.1.4 |
| prConStackRAPCopyPort mandatory This is the value of ifIndex specifying the port to which data
will be copied (mirrored), and must be set to a valid value,
along with the study port, before… | scalar | Integer32 | .1.3.6.1.4.1.43.10.34.1.5 |
| prConStackRAPEnable mandatory This object controls the Roving Analysis Port (RAP) feature in
conjunction with prConStackRAPStudyPort and
prConStackRAPCopyPort. The RAP feature allows all… | scalar | Enumeration | .1.3.6.1.4.1.43.10.34.1.6 |
| prConStackBridgeMode mandatory The value of this object determines whether the switch is to
operate as a single bridge or as a bridge per VLAN (the
default). In multiple bridge mode the s… | scalar | Enumeration | .1.3.6.1.4.1.43.10.34.1.7 |
| prConStackIpTos mandatory This object is used to enable the classification of packets
based upon the value of their IPToS field. When enabled, the
packet's Traffic Classification will… | scalar | Enumeration | .1.3.6.1.4.1.43.10.34.1.9 |