prConStackBridgeMode
A3COM0420-SWITCH-EXTENSIONS ·
.1.3.6.1.4.1.43.10.34.1.7
Object
scalar
mandatory
r/w
Enumeration
The value of this object determines whether the switch is to
operate as a single bridge or as a bridge per VLAN (the
default). In multiple bridge mode the switch maintains a
separate filtering database for each VLAN, whereas in single
bridge mode it uses a single database for them all. Thus in
multiple bridge mode the MAC address of a station can be learnt
on more than one port provided they are in separate VLANs,
while in single bridge mode the switch makes just one entry for
each address. Multiple bridge mode is useful in that separate
VLANs may be joined by a bridge external to the switch, whereas
in single bridge mode VLANs may only be connected by routers.
Not all switches will support both modes, and any attempt to set
the mode to an unsupported value will be rejected.
Note: This object only applies to bridges operating in the
dot1Qmode.
Context
- MIB
- A3COM0420-SWITCH-EXTENSIONS
- OID
.1.3.6.1.4.1.43.10.34.1.7- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- stackConfigGroup
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | single |
2 | multiple |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prConStackFwdingMode mandatory This object controls whether cut-thru is enabled on the stack.
Enabling cut-through can help to minimise the delay experienced
by packets before they are for… | scalar | Enumeration | .1.3.6.1.4.1.43.10.34.1.1 |
| prConStackPktRateControl mandatory This object controls whether the packet rate control feature is
enabled or disabled. Products which do not support this feature
will return notApplicable(1)… | scalar | Enumeration | .1.3.6.1.4.1.43.10.34.1.10 |
| prConStackPktRateLimit mandatory This object specifies the maximum rate at which the selected
types of packet may be received from a port before excess
packets are discarded. The limit is s… | scalar | Integer32 | .1.3.6.1.4.1.43.10.34.1.11 |
| prConStackStpProtocolVersion mandatory The version of the Spanning Tree Protocol that is to be used by
this Bridge.
stpVersion0(0) The original version of Spanning Tree,
… | scalar | Enumeration | .1.3.6.1.4.1.43.10.34.1.12 |
| prConStackStpPathCostDefault mandatory The version of the Spanning Tree default Path Costs that are to
be used by this Bridge.
stp8021d1998(1) Path Costs from IEEE Std. 802.1D-1998.
… | scalar | Enumeration | .1.3.6.1.4.1.43.10.34.1.13 |
| prConStackLacpOperInfo mandatory This object shall contain a value indicating that LACP is
operational, or not operational. If not operational, all units
need to be upgraded to the latest … | scalar | Enumeration | .1.3.6.1.4.1.43.10.34.1.14 |
| prConStackPaceMode mandatory This object specifies the type of backoff algorithm used on the
units in the stack. Any suitable port can use the standard
ethernet algorithm or, for PACE ap… | scalar | Enumeration | .1.3.6.1.4.1.43.10.34.1.2 |
| prConStackVLANConfigMode mandatory This object specifies the VLAN mode to be used. Setting it to
portMode(2) requires the user to configure each port's VLAN
membership individually, whereas a… | scalar | Enumeration | .1.3.6.1.4.1.43.10.34.1.3 |
| prConStackRAPStudyPort mandatory This determines the ifIndex of the port a user wishes to
monitor on the copy port. Monitoring causes all data from the
study port to be copied to the copy p… | scalar | Integer32 | .1.3.6.1.4.1.43.10.34.1.4 |
| prConStackRAPCopyPort mandatory This is the value of ifIndex specifying the port to which data
will be copied (mirrored), and must be set to a valid value,
along with the study port, before… | scalar | Integer32 | .1.3.6.1.4.1.43.10.34.1.5 |
| prConStackRAPEnable mandatory This object controls the Roving Analysis Port (RAP) feature in
conjunction with prConStackRAPStudyPort and
prConStackRAPCopyPort. The RAP feature allows all… | scalar | Enumeration | .1.3.6.1.4.1.43.10.34.1.6 |
| prConStackIpTos mandatory This object is used to enable the classification of packets
based upon the value of their IPToS field. When enabled, the
packet's Traffic Classification will… | scalar | Enumeration | .1.3.6.1.4.1.43.10.34.1.9 |