a3ComSysTokenRingPortLobeWires

A3COM-SWITCHING-SYSTEMS-TOKEN-RING-MIB · .1.3.6.1.4.1.43.29.4.13.2.1.20

Object

column mandatory RFC1155-SMICounter

The number of times the interface has
detected an open or short circuit in the
lobe data path.  The adapter will be closed
when this condition occurs.

Context

MIB: A3COM-SWITCHING-SYSTEMS-TOKEN-RING-MIB
OID: .1.3.6.1.4.1.43.29.4.13.2.1.20
Type: column
Access: readonly
Status: mandatory
Parent: a3ComSysTokenRingPortEntry
Table: a3ComSysTokenRingPortTable
Siblings: 23

Syntax

RFC1155-SMICounter

Source: RFC1155-SMICounter
Base type: Unsigned32

Values & Constraints

Type Constraints

range: 0..4294967295

Related Objects

Sibling Objects

Object	Type	Syntax	OID
a3ComSysTokenRingPortIndex mandatory The index of the token ring port identified by this entry, relative to this agent.	column	Integer32	`.1.3.6.1.4.1.43.29.4.13.2.1.1`
a3ComSysTokenRingPortACErrors mandatory This counter is incremented when a station receives an AMP or SMP frame in which A is equal to C is equal to 0, and then receives another SMP frame with A is equal to C is equal t…	column	RFC1155-SMICounter	`.1.3.6.1.4.1.43.29.4.13.2.1.10`
a3ComSysTokenRingPortAbortTransErrors mandatory This counter is incremented when a station transmits an abort delimiter while transmitting.	column	RFC1155-SMICounter	`.1.3.6.1.4.1.43.29.4.13.2.1.11`
a3ComSysTokenRingPortInternalErrors mandatory This counter is incremented when a station recognizes an internal error.	column	RFC1155-SMICounter	`.1.3.6.1.4.1.43.29.4.13.2.1.12`
a3ComSysTokenRingPortLostFrameErrors mandatory This counter is incremented when a station is transmitting and its TRR timer expires. This condition denotes a condition where a transmitting station in strip mode does not receiv…	column	RFC1155-SMICounter	`.1.3.6.1.4.1.43.29.4.13.2.1.13`
a3ComSysTokenRingPortReceiveCongestionErrors mandatory This counter is incremented when a station recognizes a frame addressed to its specific address, but has no available buffer space indicating that the station is congested.	column	RFC1155-SMICounter	`.1.3.6.1.4.1.43.29.4.13.2.1.14`
a3ComSysTokenRingPortFrameCopiedErrors mandatory This counter is incremented when a station recognizes a frame addressed to its specific address and detects that the FS field A bits are set to 1 indicating a possible line hit or…	column	RFC1155-SMICounter	`.1.3.6.1.4.1.43.29.4.13.2.1.15`
a3ComSysTokenRingPortTokenErrors mandatory This counter is incremented when a station acting as the active monitor recognizes an error condition that needs a token transmitted.	column	RFC1155-SMICounter	`.1.3.6.1.4.1.43.29.4.13.2.1.16`
a3ComSysTokenRingPortSoftErrors mandatory The number of Soft Errors the interface has detected. It directly corresponds to the number of Report Error MAC frames that this interface has transmitted. Soft Errors are those w…	column	RFC1155-SMICounter	`.1.3.6.1.4.1.43.29.4.13.2.1.17`
a3ComSysTokenRingPortHardErrors mandatory The number of times this interface has detected an immediately recoverable fatal error. It denotes the number of times this interface is either transmitting or receiving beacon M…	column	RFC1155-SMICounter	`.1.3.6.1.4.1.43.29.4.13.2.1.18`
a3ComSysTokenRingPortTransmitBeacons mandatory The number of times this interface has transmitted a beacon frame.	column	RFC1155-SMICounter	`.1.3.6.1.4.1.43.29.4.13.2.1.19`
a3ComSysTokenRingPortIfIndex mandatory The value of the MIB-II ifIndex corresponding to the token ring port identified by this entry.	column	Integer32	`.1.3.6.1.4.1.43.29.4.13.2.1.2`
a3ComSysTokenRingPortRemoves mandatory The number of times the interface has received a Remove Ring Station MAC frame request. When this frame is received the interface will enter the close state.	column	RFC1155-SMICounter	`.1.3.6.1.4.1.43.29.4.13.2.1.21`
a3ComSysTokenRingPortSingles mandatory The number of times the interface has sensed that it is the only station on the ring. This will happen if the interface is the first one up on a ring, or if there is a hardware p…	column	RFC1155-SMICounter	`.1.3.6.1.4.1.43.29.4.13.2.1.22`
a3ComSysTokenRingPortFreqErrors mandatory The number of times the interface has detected that the frequency of the incoming signal differs from the expected frequency.	column	RFC1155-SMICounter	`.1.3.6.1.4.1.43.29.4.13.2.1.23`
a3ComSysTokenRingPortRingStatus mandatory The current interface status which can be used to diagnose fluctuating problems that can occur on token rings, after a station has successfully been added to the ring. Before an o…	column	Integer32	`.1.3.6.1.4.1.43.29.4.13.2.1.24`
a3ComSysTokenRingPortLabel mandatory An ASCII text string describing the token ring port identified by this entry.	column	OctetString	`.1.3.6.1.4.1.43.29.4.13.2.1.3`
a3ComSysTokenRingPortInsertStatus mandatory The current value of the link status for the token ring port identified by this entry.	column	Enumeration	`.1.3.6.1.4.1.43.29.4.13.2.1.4`
a3ComSysTokenRingPortType mandatory Specific port type description for the token ring port identified by this entry.	column	Enumeration	`.1.3.6.1.4.1.43.29.4.13.2.1.5`
a3ComSysTokenRingPortMode mandatory The current mode of the port. The default mode (station) is used to connect a hub to the port. Lobe mode is used to direct connect a Token Ring station into the port. This selec…	column	Enumeration	`.1.3.6.1.4.1.43.29.4.13.2.1.6`
a3ComSysTokenRingPortSpeed mandatory The current speed of the port. The default speed is sixteenMegabit.	column	Enumeration	`.1.3.6.1.4.1.43.29.4.13.2.1.7`
a3ComSysTokenRingPortLineErrors mandatory This counter is incremented when a frame or token is copied or repeated by a station, the E bit is zero in the frame or token and one of the following conditions exists: 1) there …	column	RFC1155-SMICounter	`.1.3.6.1.4.1.43.29.4.13.2.1.8`
a3ComSysTokenRingPortBurstErrors mandatory This counter is incremented when a station detects the absence of transitions for five half-bit timers (burst-five error).	column	RFC1155-SMICounter	`.1.3.6.1.4.1.43.29.4.13.2.1.9`