a3ComSysSystemRequestedFddiStationMode

A3COM-SWITCHING-SYSTEMS-MIB · .1.3.6.1.4.1.43.29.4.1.26
MIB view Table view

Object

scalar mandatory r/w Enumeration 
This object describes the requested FDDI station 
mode for systems that support multi-station mode.
The requested mode will become current during
the next system reboot.

Context

MIB
A3COM-SWITCHING-SYSTEMS-MIB
OID
.1.3.6.1.4.1.43.29.4.1.26
Type
scalar
Access
readwrite
Status
mandatory
Parent
a3ComSysSystem
Siblings
31

Syntax

Enumeration

Values & Constraints

Enumerated Values
1singleStationMode
2multiStationMode

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
a3ComSysSystemId mandatory
The unique identifier assigned to this system during manufacturing.
scalarInteger32.1.3.6.1.4.1.43.29.4.1.1
a3ComSysSystemBuildTime mandatory
The build time of the system software.
scalarOctetString.1.3.6.1.4.1.43.29.4.1.10
a3ComSysSystemSnmpRevision mandatory
The revision number of the SNMP agent implementation.
scalarInteger32.1.3.6.1.4.1.43.29.4.1.11
a3ComSysSystemRequestedSnmpMode mandatory
This object describes the requested SNMP mode for the system. The value of this object indicates the mode that will become effective following a reboot of the system. Note that o…
scalarEnumeration.1.3.6.1.4.1.43.29.4.1.12
a3ComSysSystemCurrentSnmpMode mandatory
This object describes the currently active SNMP mode for the system. Note that only a subset of the above values may be valid for some systems.
scalarEnumeration.1.3.6.1.4.1.43.29.4.1.13
a3ComSysSystemAction mandatory
This object, when read, always returns the value other(1). Setting this object to the value reset(2) causes a reset of the system. Setting this object to…
scalarEnumeration.1.3.6.1.4.1.43.29.4.1.14
a3ComSysSystemOvertemperature mandatory
This object indicates the current overtemperature status for the system. If the system does not support overtemperature detection, this object returns notSupported.
scalarEnumeration.1.3.6.1.4.1.43.29.4.1.15
a3ComSysSystemFanFailure mandatory
This object indicates the current fan status for the system. If the system does not support fan failure detection, this object returns notSupported.
scalarEnumeration.1.3.6.1.4.1.43.29.4.1.16
a3ComSysSystemProtocolMask mandatory
This object is a bit mask that indicates which protocols exist in the software image currently loaded in memory. The value of this OBJECT is a sum. It initially takes on the va…
scalarInteger32.1.3.6.1.4.1.43.29.4.1.17
a3ComSysSystemConsoleAccess mandatory
This object determines whether another device can remotely access the system console via Telnet, Rlogin, or modem port. An existing remote session will not be terminate…
scalarEnumeration.1.3.6.1.4.1.43.29.4.1.18
a3ComSysSystemConsoleReadPwd mandatory
This object is the console read-access password.
scalarOctetString.1.3.6.1.4.1.43.29.4.1.19
a3ComSysSystemType mandatory
The type of system.
scalarEnumeration.1.3.6.1.4.1.43.29.4.1.2
a3ComSysSystemConsoleWritePwd mandatory
This object is the console write-access password. The read-write community string is required for access to this object.
scalarOctetString.1.3.6.1.4.1.43.29.4.1.20
a3ComSysSystemConsoleAdminPwd mandatory
This object is the console admin-access password. The read-write community string is required for access to this object.
scalarOctetString.1.3.6.1.4.1.43.29.4.1.21
a3ComSysSystemDateTime mandatory
The current date and time as reflected by the system clock in the format mm/dd/yy hh:mm:ss xM.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.43.29.4.1.22
a3ComSysSystemDSTime mandatory
This parameter specifies the displacement, in minutes, from non-daylight savings time. The a3ComSysDSTime object, along with the a3ComSysTimeZone object, allows the system to sup…
scalarInteger32.1.3.6.1.4.1.43.29.4.1.23
a3ComSysSystemTimeZone mandatory
This parameter specifies, in minutes, displacement of the system west of Greenwich. A negative number for this parameter indicates how many minutes displacement east of Greenwich …
scalarInteger32.1.3.6.1.4.1.43.29.4.1.24
a3ComSysSystemCurrentFddiStationMode mandatory
This object describes the current FDDI station mode for systems that support multi-station mode.
scalarEnumeration.1.3.6.1.4.1.43.29.4.1.25
a3ComSysSystemLognode-.1.3.6.1.4.1.43.29.4.1.27
a3ComSysSystemBaseMACAddress mandatory
The base MAC address for the system.
scalarMacAddress.1.3.6.1.4.1.43.29.4.1.28
a3ComSysSystemMACAddressCount mandatory
The number of MAC addresses allocated to this system.
scalarInteger32.1.3.6.1.4.1.43.29.4.1.29
a3ComSysSystemName mandatory
The text string describing this system.
scalarOctetString.1.3.6.1.4.1.43.29.4.1.3
a3ComSysSystemChassisSerialNumber mandatory
The serial number of the chassis.
scalarOctetString.1.3.6.1.4.1.43.29.4.1.30
a3ComSysSystemFPMemorySize mandatory
The amount of frame processor memory (RAM), in bytes.
scalarInteger32.1.3.6.1.4.1.43.29.4.1.31
a3ComSysSystemBufferSize mandatory
The amount of buffer memory, in bytes.
scalarInteger32.1.3.6.1.4.1.43.29.4.1.32
a3ComSysSystemManufacturer mandatory
The text string describing the manufacturer of this system.
scalarOctetString.1.3.6.1.4.1.43.29.4.1.4
a3ComSysSystemHardwareRevision mandatory
The revision level of the system, contained in two octets. The first octet indicates the artwork revision, and the second octet indicates the rework level.
scalarOctetString.1.3.6.1.4.1.43.29.4.1.5
a3ComSysSystemMemorySize mandatory
The amount of memory (RAM), in bytes, present on the system processor board.
scalarInteger32.1.3.6.1.4.1.43.29.4.1.6
a3ComSysSystemFlashMemorySize mandatory
The amount of flash memory, in bytes, present on the system processor board.
scalarInteger32.1.3.6.1.4.1.43.29.4.1.7
a3ComSysSystemNvMemorySize mandatory
The amount of non-volatile memory, in bytes, present on the system processor board.
scalarInteger32.1.3.6.1.4.1.43.29.4.1.8
a3ComSysSystemSoftwareRevision mandatory
The revision number of the Switching Systems software. Each byte indicates the following: byte 0: major release number. byte 1: minor release number. byte 2: update number. byte 3…
scalarOctetString.1.3.6.1.4.1.43.29.4.1.9