a3ComSysSystemProtocolMask
A3COM-SWITCHING-SYSTEMS-MIB ·
.1.3.6.1.4.1.43.29.4.1.17
Object
scalar
mandatory
Integer32
This object is a bit mask that indicates which protocols
exist in the software image currently loaded in memory.
The value of this OBJECT is a sum. It initially takes
on the value 0, then for each protocol bit as defined
below, 2 raised to the value of the (bit position - 1)
is added to the sum.
The following bits are defined:
IP_ROUTING 0x00000001
IPX_ROUTING 0x00000002
DDP_ROUTING 0x00000004
A value of 0x00000000 indicates the
standard switching software.
Context
- MIB
- A3COM-SWITCHING-SYSTEMS-MIB
- OID
.1.3.6.1.4.1.43.29.4.1.17- Type
- scalar
- Access
- readonly
- Status
- mandatory
- Parent
- a3ComSysSystem
- Siblings
- 31
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| a3ComSysSystemId mandatory The unique identifier assigned to this system during
manufacturing. | scalar | Integer32 | .1.3.6.1.4.1.43.29.4.1.1 |
| a3ComSysSystemBuildTime mandatory The build time of the system software. | scalar | OctetString | .1.3.6.1.4.1.43.29.4.1.10 |
| a3ComSysSystemSnmpRevision mandatory The revision number of the SNMP agent implementation. | scalar | Integer32 | .1.3.6.1.4.1.43.29.4.1.11 |
| a3ComSysSystemRequestedSnmpMode mandatory This object describes the requested SNMP mode for the
system. The value of this object indicates the mode that
will become effective following a reboot of the system.
Note that o… | scalar | Enumeration | .1.3.6.1.4.1.43.29.4.1.12 |
| a3ComSysSystemCurrentSnmpMode mandatory This object describes the currently active SNMP mode for
the system. Note that only a subset of the above values
may be valid for some systems. | scalar | Enumeration | .1.3.6.1.4.1.43.29.4.1.13 |
| a3ComSysSystemAction mandatory This object, when read, always returns the value other(1).
Setting this object to the value reset(2) causes a reset
of the system.
Setting this object to… | scalar | Enumeration | .1.3.6.1.4.1.43.29.4.1.14 |
| a3ComSysSystemOvertemperature mandatory This object indicates the current overtemperature
status for the system. If the system does not support
overtemperature detection, this object returns
notSupported. | scalar | Enumeration | .1.3.6.1.4.1.43.29.4.1.15 |
| a3ComSysSystemFanFailure mandatory This object indicates the current fan status for the
system. If the system does not support fan failure
detection, this object returns notSupported. | scalar | Enumeration | .1.3.6.1.4.1.43.29.4.1.16 |
| a3ComSysSystemConsoleAccess mandatory This object determines whether another device
can remotely access the system console via Telnet,
Rlogin, or modem port.
An existing remote session will not be terminate… | scalar | Enumeration | .1.3.6.1.4.1.43.29.4.1.18 |
| a3ComSysSystemConsoleReadPwd mandatory This object is the console read-access password. | scalar | OctetString | .1.3.6.1.4.1.43.29.4.1.19 |
| a3ComSysSystemType mandatory The type of system. | scalar | Enumeration | .1.3.6.1.4.1.43.29.4.1.2 |
| a3ComSysSystemConsoleWritePwd mandatory This object is the console write-access password. The
read-write community string is required for access to this
object. | scalar | OctetString | .1.3.6.1.4.1.43.29.4.1.20 |
| a3ComSysSystemConsoleAdminPwd mandatory This object is the console admin-access password. The
read-write community string is required for access to this
object. | scalar | OctetString | .1.3.6.1.4.1.43.29.4.1.21 |
| a3ComSysSystemDateTime mandatory The current date and time as reflected by the
system clock in the format mm/dd/yy hh:mm:ss xM. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.43.29.4.1.22 |
| a3ComSysSystemDSTime mandatory This parameter specifies the displacement, in
minutes, from non-daylight savings time. The
a3ComSysDSTime object, along with the a3ComSysTimeZone
object, allows the system to sup… | scalar | Integer32 | .1.3.6.1.4.1.43.29.4.1.23 |
| a3ComSysSystemTimeZone mandatory This parameter specifies, in minutes,
displacement of the system west of Greenwich.
A negative number for this parameter indicates how
many minutes displacement east of Greenwich
… | scalar | Integer32 | .1.3.6.1.4.1.43.29.4.1.24 |
| a3ComSysSystemCurrentFddiStationMode mandatory This object describes the current FDDI station
mode for systems that support multi-station mode. | scalar | Enumeration | .1.3.6.1.4.1.43.29.4.1.25 |
| a3ComSysSystemRequestedFddiStationMode mandatory This object describes the requested FDDI station
mode for systems that support multi-station mode.
The requested mode will become current during
the next system reboot. | scalar | Enumeration | .1.3.6.1.4.1.43.29.4.1.26 |
| a3ComSysSystemLog | node | - | .1.3.6.1.4.1.43.29.4.1.27 |
| a3ComSysSystemBaseMACAddress mandatory The base MAC address for the system. | scalar | MacAddress | .1.3.6.1.4.1.43.29.4.1.28 |
| a3ComSysSystemMACAddressCount mandatory The number of MAC addresses allocated to this system. | scalar | Integer32 | .1.3.6.1.4.1.43.29.4.1.29 |
| a3ComSysSystemName mandatory The text string describing this system. | scalar | OctetString | .1.3.6.1.4.1.43.29.4.1.3 |
| a3ComSysSystemChassisSerialNumber mandatory The serial number of the chassis. | scalar | OctetString | .1.3.6.1.4.1.43.29.4.1.30 |
| a3ComSysSystemFPMemorySize mandatory The amount of frame processor memory (RAM), in bytes. | scalar | Integer32 | .1.3.6.1.4.1.43.29.4.1.31 |
| a3ComSysSystemBufferSize mandatory The amount of buffer memory, in bytes. | scalar | Integer32 | .1.3.6.1.4.1.43.29.4.1.32 |
| a3ComSysSystemManufacturer mandatory The text string describing the manufacturer of this
system. | scalar | OctetString | .1.3.6.1.4.1.43.29.4.1.4 |
| a3ComSysSystemHardwareRevision mandatory The revision level of the system, contained in two
octets. The first octet indicates the artwork revision,
and the second octet indicates the rework level. | scalar | OctetString | .1.3.6.1.4.1.43.29.4.1.5 |
| a3ComSysSystemMemorySize mandatory The amount of memory (RAM), in bytes, present on the
system processor board. | scalar | Integer32 | .1.3.6.1.4.1.43.29.4.1.6 |
| a3ComSysSystemFlashMemorySize mandatory The amount of flash memory, in bytes, present on the
system processor board. | scalar | Integer32 | .1.3.6.1.4.1.43.29.4.1.7 |
| a3ComSysSystemNvMemorySize mandatory The amount of non-volatile memory, in bytes, present
on the system processor board. | scalar | Integer32 | .1.3.6.1.4.1.43.29.4.1.8 |
| a3ComSysSystemSoftwareRevision mandatory The revision number of the Switching Systems software.
Each byte indicates the following:
byte 0: major release number.
byte 1: minor release number.
byte 2: update number.
byte 3… | scalar | OctetString | .1.3.6.1.4.1.43.29.4.1.9 |