a3ComSysBridgePortRateLimitReceiveState
A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB ·
.1.3.6.1.4.1.43.29.4.10.3.1.33
Object
column
mandatory
Enumeration
This object returns the bmfrl state of the port
enabled(1) - port is up
disabled(2) - port is down, but not as
a result of BMFRL
bmfrl-disabled(3) - port was disabled
by rate limit software
Context
- MIB
- A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB
- OID
.1.3.6.1.4.1.43.29.4.10.3.1.33- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- a3ComSysBridgePortEntry
- Table
- a3ComSysBridgePortTable
- Siblings
- 36
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
3 | bmfrl-disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| a3ComSysBridgePortBridgeIndex mandatory The index of the bridge identified by this entry,
relative to this agent. | column | Integer32 | .1.3.6.1.4.1.43.29.4.10.3.1.1 |
| a3ComSysBridgePortReceiveSecurityDiscards mandatory The number of frames discarded by the bridge port
identified by this entry because they contained source
addresses which were statically configured on another
bridge port. A s… | column | RFC1155-SMICounter | .1.3.6.1.4.1.43.29.4.10.3.1.10 |
| a3ComSysBridgePortReceiveUnknownDiscards mandatory The number of frames discarded by the bridge port
identified by this entry because the destination address
was unknown. Note that this counter is only valid for
backbone ports… | column | RFC1155-SMICounter | .1.3.6.1.4.1.43.29.4.10.3.1.11 |
| a3ComSysBridgePortReceiveOtherDiscards mandatory The number of frames discarded by the bridge port
identified by this entry because they contained either
invalid (group) source addresses or source addresses
belonging to this … | column | RFC1155-SMICounter | .1.3.6.1.4.1.43.29.4.10.3.1.12 |
| a3ComSysBridgePortReceiveErrorDiscards mandatory The number of frames discarded by the bridge port
identified by this entry because of internal bridge system
errors (e.g., hardware and software address table
discrepencies). | column | RFC1155-SMICounter | .1.3.6.1.4.1.43.29.4.10.3.1.13 |
| a3ComSysBridgePortSameSegmentDiscards mandatory The number of frames discarded by the bridge port
identified by this entry because the destination address
is known on the same network segment as the source address,
i.e., the… | column | RFC1155-SMICounter | .1.3.6.1.4.1.43.29.4.10.3.1.14 |
| a3ComSysBridgePortTransmitBlockedDiscards mandatory The number of frames discarded by the bridge port
identified by this entry because the transmitting bridge
port was not in the 'forwarding' state. | column | RFC1155-SMICounter | .1.3.6.1.4.1.43.29.4.10.3.1.15 |
| a3ComSysBridgePortReceiveAllPathFilteredFrames mandatory The number of frames discarded by the bridge port
identified by this entry due to user defined receive all
path filters. | column | RFC1155-SMICounter | .1.3.6.1.4.1.43.29.4.10.3.1.16 |
| a3ComSysBridgePortReceiveMulticastPathFilteredFrames mandatory The number of frames discarded by the bridge port
identified by this entry due to user defined receive
multicast path filters. | column | RFC1155-SMICounter | .1.3.6.1.4.1.43.29.4.10.3.1.17 |
| a3ComSysBridgePortTransmitAllPathFilteredFrames mandatory The number of frames discarded by the bridge port
identified by this entry due to user defined transmit all
path filters. | column | RFC1155-SMICounter | .1.3.6.1.4.1.43.29.4.10.3.1.18 |
| a3ComSysBridgePortTransmitMulticastPathFilteredFrames mandatory The number of frames discarded by the bridge port
identified by this entry due to user defined transmit
multicast path filters. | column | RFC1155-SMICounter | .1.3.6.1.4.1.43.29.4.10.3.1.19 |
| a3ComSysBridgePortIndex mandatory The index of the bridge port identified by this entry,
within the bridge identified by this entry. | column | Integer32 | .1.3.6.1.4.1.43.29.4.10.3.1.2 |
| a3ComSysBridgePortForwardedUnicastFrames mandatory The number of unicast frames which this port forwarded
to a single destination port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.43.29.4.10.3.1.20 |
| a3ComSysBridgePortForwardedUnicastOctets mandatory The number of octets contained in unicast frames
which this port forwarded to a single destination port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.43.29.4.10.3.1.21 |
| a3ComSysBridgePortForwardedMulticastFrames mandatory The number of multicast frames which this port forwarded. | column | RFC1155-SMICounter | .1.3.6.1.4.1.43.29.4.10.3.1.22 |
| a3ComSysBridgePortForwardedMulticastOctets mandatory The number of octets contained in multicast frames which
this port forwarded. | column | RFC1155-SMICounter | .1.3.6.1.4.1.43.29.4.10.3.1.23 |
| a3ComSysBridgePortFloodedUnicastFrames mandatory The number of unicast frames which this port flooded to
all other ports in the bridge. | column | RFC1155-SMICounter | .1.3.6.1.4.1.43.29.4.10.3.1.24 |
| a3ComSysBridgePortFloodedUnicastOctets mandatory The number of octets contained in unicast frames which
this port flooded to all other ports in the bridge. | column | RFC1155-SMICounter | .1.3.6.1.4.1.43.29.4.10.3.1.25 |
| a3ComSysBridgePortStpMode mandatory The mode of the bridge port. | column | Enumeration | .1.3.6.1.4.1.43.29.4.10.3.1.26 |
| a3ComSysBridgePortReceiveMulticastLimitFrameType mandatory This object identifies the frames type(s) that are to be
counted when determining if the receive multicast limit
has been exceeded for this bridge port. Devices attached
to ne… | column | Enumeration | .1.3.6.1.4.1.43.29.4.10.3.1.27 |
| a3ComSysBridgePortForwardedFrames mandatory The number of frames which this port forwarded. | column | RFC1155-SMICounter | .1.3.6.1.4.1.43.29.4.10.3.1.28 |
| a3ComSysBridgePortReceiveMulticastLimitMultiplier mandatory This variable determines the minimum setting for the multicast
limit threshold. For example if this value equals 1000, and the
a3ComSysBridgePortReceiveMulticastLimit variable … | column | Integer32 | .1.3.6.1.4.1.43.29.4.10.3.1.29 |
| a3ComSysBridgePortIfIndex mandatory The value of the MIB-II ifIndex corresponding to the
bridge port identified by this entry. | column | Integer32 | .1.3.6.1.4.1.43.29.4.10.3.1.3 |
| a3ComSysBridgePortRateLimitReceiveMulticastEnabled mandatory This object determines whether a port participates
in multicast rate limiting set by the object
a3ComSysBridgeRateLimitReceiveMulticast | column | Enumeration | .1.3.6.1.4.1.43.29.4.10.3.1.30 |
| a3ComSysBridgePortRateLimitReceiveBroadcastEnabled mandatory This object determines whether a port participates
in broadcast rate limiting set by the object
a3ComSysBridgeRateLimitReceiveBroadcast | column | Enumeration | .1.3.6.1.4.1.43.29.4.10.3.1.31 |
| a3ComSysBridgePortRateLimitReceiveFloodEnabled mandatory This object determines whether a port participates
in flood rate limiting set by the object
a3ComSysBridgeRateLimitReceiveFlood | column | Enumeration | .1.3.6.1.4.1.43.29.4.10.3.1.32 |
| a3ComSysBridgePortLoopDetectState mandatory This object returns a reason code that will indicate why
a given port was disable by the Loop Detection software. | column | Enumeration | .1.3.6.1.4.1.43.29.4.10.3.1.34 |
| a3ComSysBridgePortAddressMaxLimit mandatory This object controls the maximum number of unicast addresses
that can be learned or configured on a port. This value is
set on a per port basis. The value can't be set lower tha… | column | Integer32 | .1.3.6.1.4.1.43.29.4.10.3.1.35 |
| a3ComSysBridgePortAddressState mandatory This object returns a reason code that will indicate why
a given port was disable, when a3ComDaAddressMode is set
to secure. | column | Enumeration | .1.3.6.1.4.1.43.29.4.10.3.1.36 |
| a3ComSysBridgePortReceiveInternalPathFilteredFrames mandatory The number of frames discarded by the bridge port
identified by this entry due to receive internal
path filters. | column | RFC1155-SMICounter | .1.3.6.1.4.1.43.29.4.10.3.1.37 |
| a3ComSysBridgePortReceiveMulticastLimit mandatory This variable limits the number of multicast frames forwarded
by this port over a 1 second interval. The minimum threshold
limit may vary between platforms, but can be determin… | column | Integer32 | .1.3.6.1.4.1.43.29.4.10.3.1.4 |
| a3ComSysBridgePortAddressAction mandatory This object, when read, always returns the value
other(1). The behavior of setting this object to each of
the acceptable values is as follows:
freezeAddress: ca… | column | Enumeration | .1.3.6.1.4.1.43.29.4.10.3.1.5 |
| a3ComSysBridgePortSpanningTreeFrameReceivedCounts mandatory The number of spanning tree frames received by the
bridge port identified by this entry. | column | RFC1155-SMICounter | .1.3.6.1.4.1.43.29.4.10.3.1.6 |
| a3ComSysBridgePortReceiveBlockedDiscards mandatory The number of frames discarded by the bridge port
identified by this entry because the receiving bridge port
was not in the 'forwarding' state. | column | RFC1155-SMICounter | .1.3.6.1.4.1.43.29.4.10.3.1.7 |
| a3ComSysBridgePortReceiveMulticastLimitExceededs mandatory The number of times the value of
a3ComSysBridgePortReceiveMulticastLimit was exceeded for the
port identified by this entry. | column | RFC1155-SMICounter | .1.3.6.1.4.1.43.29.4.10.3.1.8 |
| a3ComSysBridgePortReceiveMulticastLimitExceededDiscards mandatory The number of multicast/broadcast frames discarded by the
bridge port identified by this entry because the
corresponding value of a3ComSysBridgePortReceiveMulticastLimit
was ex… | column | RFC1155-SMICounter | .1.3.6.1.4.1.43.29.4.10.3.1.9 |